ReviewsMarble Milling Tool

Milling Cutter Bearings Replacement Kit, Bearing Replacement Set 1 1/8 Outer Dia Compact Top Mounted for Shank for Head

  • Good Quality Steel Material: Made of good quality steel material, fast and easy to use, possess high strength, good toughness, uniform material bring high working reliability.
  • Compact Shape: This router bit bearing come with compact shape, easy to carry, convenient for you to store and use.
  • 28.6mm Bearing Diameter: The bearing diameter is 28.6mm, equipped with screw and hex wrench for easy installation and disassembly.
  • For Milling Cutter Heads And Tool Holders: Durable steel bearing accessories are suitable for milling cutter heads and tool holders, very practical.
  • Replace Or Repair Damaged Or Missing Bearings: Milling cutter bearing replacement kit can be used to replace or repair damaged or missing router bit bearings.
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

Carbide Chamfer Cutter, End Mills Tungsten Steel 3 Flute Chamfer End Mill 90° for Carving for Chamfering(D4*90°*50L)

  • The chamfering tool has standard size and can be used as an aluminumcopper milling cutter tool and an engraving milling cutter head..
  • The professional chamfer design can polish and engrave the workpiece without unloading..
  • The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
  • The chamfering tool is mainly used for 90° chamfering or taper hole processing on the workpiece..
  • The chamfering is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
Check Stock

It Works Great HSS Lathe Tool Bit 8mm x 8mm x 200mm, Square Lathe Turning Tool Blanks, High Speed Steel Rectangular Fly Cutter Mill Blank (5/16 inch x 5/16 inch x 8 inch ) 2pcs

  • Specifications: Size: 8mm x 8mm x 200mm, hardness HRC60~62. High-speed steel lathe tool bit.
  • High-speed Steel Tool: High-speed steel tool bit is with combination of hardness and toughness for wear resistance.
  • Features: Parallel style cutter is with continuous width of cutting edge throughout length of tool bit.
  • General Purpose: HSS tool bit is a superior finishing tool for cuts in hard materials of mild steel, alloy and tool steel.
  • Versatile Tool Bit: Ideal for milling, turning, parting, engraving, drilling, punching, etc. Commonly used on a lathe, a milling machine fly cutter or a metal shaper.
Check Stock

HSS 12mm x 45 Degree Dovetail Cutter Milling End Mill High Speed Steel

  • Durable and Sturdy: This Dovetail Milling Cutter is made of high speed steel, so it is wear-resistant, durable, tough, and you can use it for a long time..
  • Uniform Angle Distribution: This Dovetail Milling Cutter featuring uniform angle distribution and double-edged design has more excellent cutting performance..
  • Wide Application:This milling cutter with fine workmanship and high quality is suitable for mold steel, alloy steel, carbon steel, tool steel, cast iron and more..
  • Meet Your Needs: Available in 45 and 60 degree, 8 and 10 flute, and 12mm,14mm,16mm,18mm, 20mm, and 25mm diameter, this Dovetail Milling Cutter can meet your needs..
  • Satisfaction Guarantee: We strive to bring the product to our customers. If you are not satisfied, please let us know, and we'll do our to make it right.
Check Stock

2 Axis Metal Case LCD DRO Digital Readout Display for Mill Milling/Lathe Machine (2 Axis DRO)

  • ...Meanwell Power supply ,Omran Key button.Switch on& Switch off can meet more than 100000 times.
  • [HIGH Performance】-Acceptable resolution: 10um ,5um ,2um ,1um , 0.5um.
  • Min resolution of digital display angle :0.0001/pulse, Linear Scale/Magnetic scale Interface: DB9(TTL/EIA-422-A).
  • 【Wide Application】Applicable for milling machine, drilling machine, grinding machine, lathes, profile projector, video measuring machine, position monitoring, coordinate measurement,.
  • 【Special Function】1:Tool radius compensation: In the use of cylindrical milling tool carrier, the tool radius must be taken into account. The direction of process will decide the increase or decrease of calculated value .Once the tool number is inputted, the DRO value will be saved. 2 :Determine the workpiece centre: Only through the tool or touching the two points of workpiece, the DRO can calculate the workpiece centre.
  • 3 :200 sets tool base: While repeat the same process in the workpiece, you can store the tool value which will be convenience to the operator Round arc processing: Sample round processing and two axis arc processing.
  • 4:Slope calculation: Input the two points of workpiece, the DRO can calculate the slope of the workpiece..
Check Stock

Fafeicy Carbide Chamfer End Mill, 3 Flute 60° Milling Cutter V Groove Router Bit Tungsten Steel CNC Carving Polishing Router Bit, for Plywood, Soft Wood(D4*60°*50L), Milling Cutter

  • The chamfering mill is mainly used for the 60 ° chamfer or conical hole of the workpiece, and the edges and angles of each surface are champened..
  • This hard alloy chamfered milling cutter unique single-piece design makes debris generated during the cutting process without clogging the tool..
  • The chamfering cutter is of standard size and can be used as aluminum-copper milling tool and engraving milling cutter bit..
  • This hard alloy chamfering cutter uses 3 flute design to complete the processing of tapered surfaces at a time, suitable for small cutting processing..
  • This chamfering cutter has a wide range of applications, suitable for hardwood, plywood, cork, oak, MDF and metal in HRC 55..
Check Stock

wolfcraft 6901000 1 Parallel milling Guide, Multicolored

  • Parallel milling stop Suitable for items up to 40 mm thick for end mills up to 27 mm wide. For use solely with Master Cut 2000 and Master Cut 1500 items. Wolfcraft stop with precision adjustment..
  • For perfect results, it is possible to adapt to the size of the end mill using an adjustable stop. The parallel milling stop can be mounted safely without any tools using controls. Clever connection for suction of dust. Large items should be supported by a roller stand (e.g. ref. 6102300, weight 2.8 kg, 10-year *).
  • Rotary knobs and adjustable stop for quick, tool-free fastening to the tabletop.
  • Adjustable stop for adapting to milling cutters up to a diameter of 27 mm ..
  • Connection for commercially available vacuum cleaner for dust-free working.
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock