ReviewsMarine Bilge Pumps

Manual Bilge Pump for Boats Kayak Canoe Hand Water Pump | Hand Pumps Siphon Pump Bailer Kayaking Boat with Hose Portable Held 20 Gallons Per Minute Suction Marine Grade Regular

LONG HOSE FOR EASY WATER REMOVAL: A 39" long hose lets you reach deep areas to discharge with ease. 1" intake nozzle, 14" chamber and 1.25" diameter hose to remove water quickly. 115 cubic inches per pump or 1 gallon removal in 2 to 3 pumps..
NO CLOG FILTER & WATERTIGHT GASKET: A rubber seal creates a watertight seal that won't leak allowing for maximum suction with the manual water pump. Features a filtered nozzle to prevent seaweed, leaves and debris from clogging the hand siphon pump..
LIGHTWEIGHT, PORTABLE & IDEAL FOR EMERGENCIES: The hand pump is light and easy tostore, making it perfect for emergency use in small boats, kayaks, canoes or dinghy. Does not require power making it ideal as an emergency bailer or in kayaking..
EXCEPTIONAL QUALITY: Our marine-grade bilge pump is specially designed to quickly remove water from hard to reach places season after season. We use premium materials not found in other lesser quality boat, RV, car and home products..
WHY BETTER BOAT: We are a family owned American business committed to making premium quality interior & exterior RV care and boat cleaning supplies. We stand behind your satisfaction and our hand water pump or hand held bilge pumps for boats..

Check Stock

Erfo 3\ in-Line Marine Bilge Air Blower Electric for Boat Bilges and Heads, DC12V, 2.5A, 130CFM, 3\ Outlet Hose

【Durable】 In-line marine blower use anti-aging, anti-ultraviolet ABS thermoplastic and strong reinforcement materials to achieve maximum durability and reliability..
【Low Noise】 Marine bilge air blower adopts durable plastic fan shell and blades, which is small in size but quiet operation..
【Energy Saving】Bilge blower has a compact structure, high air volume and a long service life. Easy to install on any surface, which can provide higher airflow and lower current consumption..
【Effective Ventilation】Powerful blower, four-blade fan, air flow is 130CFM. The fan is made of high-strength nylon, which can maximize airflow and efficiency..
【Widely Application】In-line marine bilge air blower is suitable for boats bilge, engine compartments, channels, yachts, RVs other space ventilation applications..

Check Stock

Boat Marine Manual Hand Bilge Waste Water Transfer Pump Qiilu Plastic Handle Marine Manual Diaphragm Hand Bilge Water Pump for Boat Yacht

Excellent Design------Boat Marine Manual Hand Bilge Waste Water Transfer Pump is suitable for compact manual self-priming pump. Provides flow rates up to 12 gallons per minute (45 liters per minute)..
Durable and Reliable------Boat Marine Manual Hand Bilge Waste Water Transfer Pump has a robust and durable construction designed for marine applications. Ideal as a backup bilge pump in case your electronic bilge pump fails..
Specifications------ Manual Diaphragm Pump, Material: ABS, Diaphragm Manual Pump with Two Position Handle, Packing List: 1 x Manual Diaphragm Pump, 2 Adapters, 2 Seals..
Dimensions ------- Hose Inlet: Approx. OD. 1.36" (34.5 mm), Hose Outlet: Approx. OD. 1.36" (34.5mm), Max Suction Lift: Approx. 10ft (3m), Max Discharge Head: 13ft (4m). Flow: 720GPH (2724 LPH).
Easy to use------fixed handle with rubber handle, easy to use. Installation can be done without complicated steps..

Check Stock

Maxzone Bilge Pump Installation Kit Bilge Pump Hose 1-1/8-Inch Dia Plumbing Kit | 6 FT Premium Quality Kink-free Flexible PVC Hose | Includes 2 Hose Clamps and Thru-Hull Fitting

Complete installation kit for bilge pumps with 1-1/8 inch outlet..
Kit includes 6 FT of 1.125" ID (Inner Diameter) hose, 2 stainless steel worm gear hose clamps, and 1 thru hull connector..
Cuff-less design with smooth inner bore prevents leaks at connection ends. Easy to cut to any desired length. Ideal for marine or freshwater boating.
Corrugated helix, kink-proof construction with an excellently tight bend radius ensures maximum durability and maintains a steady flow..
Please verify your bilge pump outlet size before purchase. Not for use with below waterline thru-hull connections..

Check Stock

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
to achieve a small size perfect combination of high flow..
It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
Ignition protection Water/moisture tight seals.
Snap lock strainer base for easy installation and removal.

Check Stock

Ogrmar Automatic Boat Bilge Pump Float Switch Moisture Tight Seals 12/24/32VDC Ignition Protected Mercury

Compact efficient long life motors: Small volumn and portable bilge pump is made of long life motors .It can Improve work efficiency.
Exclusive Moisture Ting Seals: Bilge pump is made from heavy duty marine sealant and corrosion material Protection.
Cleanable Strainer: The pump base is used by high qulity easy clean snap lock strainers. the life-span of the bilge pump could be prolonged..
Easy to Install: Design common installation location and it can use with the bilge switch.
Wide Application : Bilge pump can be used in aquarium,fishing boats,fountain and other places to easily drain the water.

Check Stock

H8eraide Bilge Cleaner - Eco Friendly Non-Foaming Boat Bilge Cleaner - Leaves Your Bilge Clean and Deodorized

✔️THINK ABOUT WHAT YOU ARE PUTTING IN THE WATER - H8eraide has produced a 100% biodegradable Bilge Cleaner for boats that works. Our competitors do not care about the harmful effects of their cleaners, but we want to change YOUR OUTLOOK. Think before you clean and use boat cleaners that not only work but are safe! You will feel good about your boat cleaning!! Our bilge cleaner for boat is 100% biodegradable, non-foaming and safe on all bilge pumps!.
✔️HELP US FIGHT CANCER! -Profits are donated to the H8 Cancer foundation to help find a cure for all types of cancer in our lifetime. Not only are you getting a great bilge cleaner you are helping a great cause!.
✔️ ULTIMATE BILGE CLEANER & DEODORIZER - Our patented technology removes gunk and grime from your boat bilge easily!. Works on any boat as a great way to get a clean bilge. The only way to clean your boat is with H8eraide Bilge Cleaner!.
✔️ECO-FRIENDLY! -Our Environmentally Safer formula contains no unnecessary ingredients and is 100% biodegradable per OECD guidelines. Phosphate-Free, Contains no artificial fragrances, no dyes, no thickening agents, no chelating agents, no NPE or SLS surfactants, and no solvents..
✔️ - If our product does not meet your expectations reach out to us....

Check Stock

Shoreline Marine Fully Submersible Bilge Pump 600GPH with ¾’ Outlet Hose Barb

Fully submersible 600 Gallons per hour bilge pump with a self-contained automatic switch to maintain a safe water level.
Features a durable plastic housing that can withstand the harshest marine environment.
Comes with a universal mounting base for effortless installation and cleaning.
With a tough stainless-steel impeller shaft and tinned marine grade wiring for a steady and reliable performance.
The outlet hose barb measures ¾’ that can fit a common ¾ bilge hose and thru-hull fittings.

Check Stock

Whale BE9003 Electric Field Sensor Switch, 12V or 24V, Suitable for Up to 20 Amps

Precision switch automatically activates and shuts off bilge pumps when water reaches specific levels.
Worry-free, precise operation ensures proper bilge pumping and provides peace of mind.
Automatically activates bilge pump when 2 inches of water is sensed.
Turns pump off when water level drops below ½ inch.
Two color-coded wires make installation easy.
Two test circles can be used to ensure activation.
Offers side or base mounting, can operate with 12V or 24V power, and it is suitable for up to 20 amps.

Check Stock

Rule 3003.7351 Bilge Pump Motor Cartridge 700 GPH

Fits Rule Cartridge and Bilge Live well/Aerator pumps.
Fuse Protection: 5A (fuses sold separately).
Works with Pro-Series Live well pumps (now discontinued).

Check Stock

Rule Marine Tournament Series Livewell Pump 800 GPH

Fits Rule Cartridge and Bilge Live well/Aerator pumps.
Fuse Protection: 5A (fuses sold separately).
Works with Pro-Series Live well pumps (now discontinued).

Check Stock