ReviewsMarine Bottom Paint

Dolphin Premium Marine Topside Boat Paint | Gallon | Fiberglass, Wood, Metal, Aluminum | Easy to Apply & Long Lasting (Black, Gallon)

  • ✅ MARINE TOPSIDE PAINT FOR BOATS: For use above the waterline on fiberglass, wood, metal, aluminum, gelcoat and previously painted surfaces in good condition. Choose from a variety of popular color choices..
  • ✅ EASY TO APPLY: Professional results by simply brushing, rolling or spraying. Apply 2 thin coats on a prepared surface. Don't paint in direct sunlight and allow each coat to dry overnight..
  • ✅ USED FOR VARIOUS MARINE APPLICATIONS: Commonly used on primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, bridges, tanks, offshore oil rigs and other structures..
  • ✅ HIGH GLOSS LONG-LASTING FINISH: This marine structure and boat paint is scratch & chemical resistant and stands up to salt water, oil, gasoline, repeated washings for a long-lasting finish..
  • ✅ AVAILABLE IN MANY COLORS: Our topside paint is available in a variety of colors. Dolphin Boat Paints also sells boat primer, paint thinner and boat non-slip grip paint..
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray, Quart)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

DURALUX Camouflage Paint - Duckboat Drab, 1 Gallon, Camouflage Marine Paint for Boats, ATVs, Hunting Blinds & More, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • CAMOUFLAGE MARINE PAINT: Get a long-lasting, ultra-low luster finish on your boat, tree stand or hunting blind with Duralux Duckboat Drab Camouflage Paint..
  • LONG-LASTING FINISH: This structure and boat paint stands up to saltwater, oil, gasoline, and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF APPLICATIONS: This oil alkyd-based camo paint adheres to steel, metal, wood, aluminum and fiberglass. It's perfect for boats, tree stands, hunting blinds, ATVs and trailers..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-gallon container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors..
Check Stock

Duralux Camouflage Paint - Duckboat Drab, 1 Quart, Camouflage Marine Paint for Boats, ATVs, Hunting Blinds & More, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

  • CAMOUFLAGE MARINE PAINT: Get a long-lasting, ultra-low luster finish on your boat, tree stand or hunting blind with Duralux Duckboat Drab Camouflage Paint..
  • LONG-LASTING FINISH: This structure and boat paint stands up to saltwater, oil, gasoline, and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF APPLICATIONS: This oil alkyd-based camo paint adheres to steel, metal, wood, aluminum and fiberglass. It's perfect for boats, tree stands, hunting blinds, ATVs and trailers..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-quart container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors..
Check Stock

TotalBoat Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | For Fiberglass, Wood, Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs (Black, Gallon)

  • HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
  • COPPER FREE FORMULA won’t cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
  • copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
  • FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
  • haul and relaunch without losing the effectiveness of the biocide.
  • EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
  • for rolling, use a 3/16” nap or foam solvent-safe roller cover.
  • if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
  • AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
  • after applying, there’s no maximum dry time before launch.
Check Stock

TotalBoat Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | for Fiberglass, Wood, Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs (Black, Quart)

  • HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
  • COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
  • copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
  • FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
  • haul and relaunch without losing the effectiveness of the biocide.
  • EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
  • for rolling, use a 3/16” nap or foam solvent-safe roller cover.
  • if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
  • AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
  • after applying, there’s no maximum dry time before launch.
Check Stock

Louie's Backyard Cookbook: Irrisistible Island Dishes and the Best Ocean View in Key West (Roadfood Cookbook)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

TotalBoat Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | for Fiberglass, Wood, Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs (Blue, Quart)

  • HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
  • COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
  • copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
  • FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
  • haul and relaunch without losing the effectiveness of the biocide.
  • EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
  • for rolling, use a 3/16” nap or foam solvent-safe roller cover.
  • if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
  • AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
  • after applying, there’s no maximum dry time before launch.
Check Stock

TotalBoat Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | for Fiberglass, Wood, Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs (Blue, Gallon) -

  • COPPER-FREE, HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime..
  • KRYPTON CAN BE APPLIED TO FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS. Bottom paints are for use below the waterline only..
  • BRIGHT COLORS ARE MORE VIBRANT THAN BOTTOM PAINTS CONTAINING COPPER BIOCIDE..
  • EASY TO APPLY BY BRUSH, ROLLER, OR SPRAYING: For brushing, use a high-quality, natural bristle brush.
  • for rolling, use a 3/16” nap or foam solvent-safe roller cover. Copolymer formula means that after application, there’s no maximum dry time to launch. So you can paint in the fall, store for the winter, and launch in the spring! You can also haul and relaunch without losing the effectiveness of the biocide..
  • AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only). Coverage: 500 sq. ft. per gallon..
Check Stock

TotalBoat Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | For Fiberglass, Wood, Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs (Red, Gallon)

  • HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
  • COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
  • copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
  • FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
  • haul and relaunch without losing the effectiveness of the biocide.
  • EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
  • for rolling, use a 3/16” nap or foam solvent-safe roller cover.
  • if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
  • AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
  • after applying, there’s no maximum dry time before launch.
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood White Gallon

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and....
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
Check Stock