ReviewsMark Dacascos Drive 2

KBOISHA 1/2\ Master Drive Impact Socket Set,65-Piece 6 Point Socket Set Standard SAE and Metric Sizes CR-V Steel Sockets with Adapters & Ratchet Handle

  • 【HEAT TREATED CR-V】: KBOISHA industrial grade impact socket set adopt higher quality chrome vanadium steel. After heat treatment and forging, it has high hardness and good toughness. Flexible for impact wrench and other high torque tools..
  • 【6-POINT DESIGN】: Special internal arc angle design of 6-point socket increases the contact area with the fasteners, grasp more firmly. Protect nut from wear and skid..
  • 【HIGH DURABILITY】: The surface is black phosphate finish to prevent the socket from rusting,and corrosion resistant, extend the service life. Can remove fasteners at least ten thousand times..
  • 【DOUBLE SIZE MARK】: The laser mark on the impact socket and the specification mark on the tool box make it easy to quickly identify the socket you need. It is suitable for the installation and repair of automobile, machinery, equipment and other products..
  • 【COMPLETE CONFIGURATION】: With a heavy toolbox, convenient to storage and carry, include: 1/2" drive 15 x metric sockets.
Check Stock

CRAFTSMAN Mechanics Tool Kit 137 Pieces 933137

  • Set includes 84 sockets in 3 drive sizes, 6 combination wrenches, 5 drive tools and 42 specialty tools.
  • 84 Easy-To-Read sockets with a permanent mark that will not chip, fade or corrode.
Check Stock

Polaroid Wireless Camera Shutter Remote with Interval Timer for Select Canon SLR Cameras

  • [Compatible Models] AODELAN br-e1a shutter release just compatible with Canon EOS R5 C, R3, RP, EOS R, EOS R5, EOS R6, 6D Mark II, 77D, 800D(EOS Rebel....
  • [Easy To Use] Please notice that when you pair it pls Make sure your camera drive mode to remote mode.AODELAN Canon wireless remote control BR-E1A....
  • [Shooting Still Photos and videos two function] Camera remote control BR-E1A besides shooting still photo (support immediate release and 2-sec delay....
  • [Focusing with AF and Zooming] - the feature of zooming only works when using with the Canon PZ-E1 Power Zoom Adapter (NOT INCLUDE), and movement of....
  • Pls notices that that shutter compatible models, not work with other models. And Make sure your camera drive mode to remote mode..
Check Stock

Snow Stakes Driveway Marker Plow Stakes 5/16 Thick X 48 Orange Fiberglass Stakes 25 Pack

  • - Our Driveway reflectors are made up of best quality glass to provide our customers a sense of satisfaction.....
  • - Installing a Driveway has never been made this easy. Due to its pointed tip, you can easily install it in your drive way....
  • ✅ Solution is here- Driveway reflective markers are not just for driveways, they are also used as reflective road markers, lawn markers.....
  • - You can use our markers to mark any type of property or to mark boundaries. These multi-purpose markers are great to mark your....
  • - Our products are highly durable and flexible, which makes them long lasting and reliable. Because of the use of high-grade material,....
Check Stock

DSLRKIT Lens Focus Calibration Tool Alignment Ruler Folding Card(Pack of 2)

  • Compatible with Canon Nikon Sony and other DSLR Camera Camcorder DV Video.
  • Fits industry standard 15mm rod mounts and 60mm center to center distance.
  • Gear drive can adjust camera focus in a more accurate and smooth way.
  • Gear ring belt suitable for less than 100mm diameters lens.
  • White mark ring made of plastic and used to mark the scale on follow focus.
  • Note: Only follow focus, camera and other shoulder rig are not included.
Check Stock

Cyber Pro Professional Hard Drive Eraser DVD Stop Identity Theft Completely Wiped Out Personal Information, Passwords, Sensitive Bank Accounts Information PC Mac Laptop Desktop Microsoft Compatible

  • The bootable DVD has on screen instructions which start automatically. It is very easy to use. (insert the DVD and change the computer Boot Order from the internal Hard Drive to Boot from the DVD in the CD/DVD Rom Drive, Via the computer's Function Key(s) and restart the computer).
  • Erases all of the data on the hard drive entirely. (Leaves no mark of recovering it by any methods)..
  • Meets U.S. Dept. of Defense Dod 5220.22M Disk Sanitizing Specifications.
  • Erases ALL Operating systems completely and return the hard drive to its original state for reuse. (You can install new operating system)..
Check Stock

FIX IT STICKS Tightening +/- 10% Accurate 15-65 inch-lbs All-In-One Torque Driver Tool Kit w/ T-Way Wrench Bits Socket Adapters

  • MULTIPURPOSE USE - Choose Fix It Sticks All-in-One Torque Driver, Fix It Sticks All-in-One Torque Driver Kit or Mini All-in-One Torque Driver to tighten down your scope rings, mounts, actions screws, red dot sights, mounting plates, etc. to the correct tongue while in the field, at the range, or at home.
  • NO OVER/UNDER TIGHTENING - Enjoy ultimate performance with lightweight and compact All-in-One Torque Drivers - no more over or under tightening your critical components.
  • EASY ADJUSTMENT - Just turn the drive handle until the hash mark lines up with the torque value you need (from 15 - 65 inch-lbs).
  • in case with Mini All-in-One Torquer Driver just turn the drive handle until the hash mark lines up with the torque value you need (from 6 - 25 inch-lbs).
  • 1/4" BIT & DRIVER COMPATIBLE - These adjustable Torque Drivers accept any standard 1/4" Bit and works with any standard 1/4" Driver.
  • ZIPPERED CASE (KIT ONLY) - The Fix It Sticks All-in-One Torque Driver Kit goes with a zippered carrying case with a holder.
Check Stock

HORUSDY 3/8 Drive Impact Socket Set 50-Piece Standard SAE 5/16 to 3/4 inch and Metric 8-22mm Size 6 Point Cr-V 3/8-Inch Drive Ratchet Handle Drive Extension Bar Impact Universal Joint

  • High quality forging, forged from heat treated chrome vanadium steel, each socket surface treated with corrosion resistant black phosphoric acid to prevent oil and rust..
  • Product specification includes 3/8-Inch Drive Ratchet Handle, 3" and 6" drive impact extension bar, 3/8" universal joint, 1/2" to 3/8" reducer and the following socket sizes: SAE, Deep: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 (inches), Shallow: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 (inches) ,Metric Sizes: Deep: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,21,22mm, Shallow: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,21,22mm.
  • Laser marking, each with a clear laser size mark, makes it quick and easy to select even in dim light..
  • Customized storage boxes, each with a designated slot, so that the socket does not fall off easily. Sizes are also printed next to each card slot for easy identification..
  • 6-point socket design expands the contact surface between the socket and the fastener, increasing the locking force, reduces wear and prevents rounding off at corners.
Check Stock

ComMarker B4 50W Fiber Laser Engraver,LightBurn Compatible Laser Engraving Machine with 2 Different Size Lens,2-in-1 Desktop and Handheld Fiber Laser Marking Machine for Jewelry,Sliver,Gold,Tumblers

  • ...er source,2 in 1 Desktop and Handheld Fiber Laser Marking Machine,support Lightburn and EzCad2(we provide), support rotary. With 2 lens 110x110mm + 200x200mm. 2 years warranty..
  • Package includes: 1xB4 Machine, 1x 110mmx110mm Lens, 1x200x200mm Lens, 1x Rotary Drive, 1xAdapter, 1xFoot Switch, 1xPositioner, 1xUSB Drive, 1xRuler, 1xData Cable, 1xAllen Wrench, 1x1064nm Goggles, 2xPaperboard, 2xSteel Plate, 1xAuxiliary holder, 1x Material package..
  • Our commarker B4 laser engraving machine is High-speed precision galvanometer, high marking accuracy, equipped with different field mirrors, large carving area, fast carving speed, automatic lifting, emergency switch, very safe. Small weight and volume, wide engraving range, international certification. Meet the business and personal needs of customers..
  • Engraveable material: ComMarker fiber laser engraver can engrave Stainless Steel, Aluminum, Gold, Silver, Alloy etc also can mark most of the Painted products and non-transparent plastics.engraving machine for Metal, Jewelry, Pen,Tag,Tumblers..
Check Stock

Canon EOS Rebel T7/2000D User Guide: The Most Complete Step by Step Manual to Mastering the Canon EOS Rebel T7/2000D Camera Settings and Updates with Useful Photography Tips & Tricks for Beginners

  • ※ [Compatible cameras]: Canon EOS RP, R, M5, M6, 1D X Mark II, 1D X, 1D C, 1Ds Mark III, 1Ds Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5D Mark IV, 5D Mark III, 5D Mark II, 5DS R, 5DS, 5D, 6D Mark II, 7D Mark II, M6 Mark II, 7D, 10D, 20D, 30D, 40D, 50D, 60Da, 60D, 70D, 77D, 90D, D60, D30.
  • EOS-1V, EOS-3, EOS Rebel T7, T7i, T6s, T6i, T6, T5i, T5, T4i (650D), T3i (600D), T3 (1100D), T2i (550D), T1i (500D), XSi (450D), XTi (400D), XT (350D), XS (1000D), Contax N and 645..
  • ※ [Compatible cameras]: Canon Digital Rebel (300D), SL2 (200D), SL1 (100D), Elan series, PowerShot SX70 HS, SX60 HS, SX50 HS, G1 X Mark III, G1 X Mark II, G1 X, G3 X, G5 X, G10, G11, G12, G15, G16. Fujifilm: X30, X100T, X-E1, X-E2 and X-T1 Hasselblad: H series .Olympus: OM-D E-M1 Mark II. Pentax: K-1 Mark II, K10D, K20D, K100D, K110D, K200D, K-3, K-5, K-5 II, K-7, K30, K-50, K-500, *istDS, DS2, DS, DL2, DL, and D. Samsung: NX10 & NX100.
  • [Wireless and wired]: Wirelessly trigger your camera’s shutter, receiver can also be used as a wired shutter remote. The receiver needs to install 2 AAA (2 AAA not included in the package), the transmitter needs to install a CR2032 battery (included in the package)..
Check Stock

Camera Remote Control Wireless Shutter for Canon EOS RP, R6, ROS RP, Rebel T6, T7, T5, T3, SL2, 5D Mark II, 5d Mark iii, 5d Mark iv, 6D Mark II, 7d Mark ii, 7D Series, 5D Series; for Fujifilm X-T3

  • ※ [Compatible cameras]: Canon EOS RP, R, M5, M6, 1D X Mark II, 1D X, 1D C, 1Ds Mark III, 1Ds Mark II, 1Ds, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D, 5D Mark IV, 5D Mark III, 5D Mark II, 5DS R, 5DS, 5D, 6D Mark II, 7D Mark II, M6 Mark II, 7D, 10D, 20D, 30D, 40D, 50D, 60Da, 60D, 70D, 77D, 90D, D60, D30.
  • EOS-1V, EOS-3, EOS Rebel T7, T7i (800D), T6s (760D), T6i (750D), T6 (1300D), T5i (700D), T5 (1200D), T4i (650D), T3i (600D), T3 (1100D), T2i (550D), T1i (500D), XSi (450D), XTi (400D), XT (350D), XS (1000D), Contax N and 645..
  • ※ [Compatible cameras]: Canon Digital Rebel (300D), SL2 (200D), SL1 (100D), Elan series, PowerShot SX70 HS, SX60 HS, SX50 HS, G1 X Mark III, G1 X Mark II, G1 X, G3 X, G5 X, G10, G11, G12, G15, G16. Fujifilm: X30, X100T, X-E1, X-E2 and X-T1 Hasselblad: H series .Olympus: OM-D E-M1 Mark II. Pentax: K-1 Mark II, K10D, K20D, K100D, K110D, K200D, K-3, K-5, K-5 II, K-7, K30, K-50, K-500, *istDS, DS2, DS, DL2, DL, and D. Samsung: NX10 & NX100.
  • [Wireless and wired]: Wirelessly trigger your camera’s shutter, receiver can also be used as a wired shutter remote. The receiver needs to install 2 AAA (2 AAA not included in the package), the transmitter needs to install a CR2032 battery (included in....
Check Stock