ReviewsMarker 2

14Pcs 4 Inch Rectangle Led Trailer Marker Lights w/Reflex Lens, 2x4 LED Trailer Clearance Side Marker Lights 6 LED Surface Mount for Truck RV Camper Motorhome Clearance Running Lights(7 Amber+ 7 Red)

  • This listing features for 7 pieces 4 inch rectangle amber led trailer marker lights and 7 pieces 4 inch rectangular red led trailer side marker lights, 14 pieces in total. Each rv side marker led lights includes 2 pieces stainless steel screws for surface mounting.
  • Dimensions: 100mm(L)x 50mm(W) x 25mm(H) = 4" x 2" x 1" approx. and fit on standard 3" centers.
  • The rectangular trailer rv side clearance lights features a replaceable, snap-on reflective lens, and built-in reflex reflector removes the need for a separate reflector. Hardwired with 2 wires to mount to any surface: white is ground and black is positive.
  • As many 4 inch rectangle led side marker lights on market have the wires exit from corner or middle of bottom base, our led markers have the wires exit form the from side of bottom base. Also each led trailer light come with 6 led chips, not the led diodes, which will be brighter and have longer lifetime, really great replacement for your old incandescent side marker lights.
  • These 2x4 led marker lights universally fit for most rv, camper, motorhome, trucks, trailers, pickups,tractor etc.an....
Check Stock

EXPR Premium Door Install Kit 2-3x Stronger No Shimming Needed! Single Kit Installs 1 Door

  • Markers Included in the Kit: Strike Plate Marker, Latch Marker, Deadbolt marker, Lip Strike Marker, Strike Locator.
  • Bits Included in the Kit: 1-1/2" Multi Spur Bit, 2-1/8" Multi Spur Bit, 1" inch Auger Bit.
  • Tools Included in the Kit: The Killer Jig, Heavy-Duty Carrying Case, Set of 2-1/8" Hardened Bushing Plates.
Check Stock

Partsam 2Pcs 2\ x 6\ Rectangular Trailer Marker LED Lights 21 Diodes with Chrome Plastic Light Bezel w/Visors, Amber 6\ x 2\ Rectangular LED Marker Lights/Turn Signal lights Surface Mount

  • Package includes 2 Pieces 2" x 6" Rectangular Trailer Marker LED Lights with chrome plastic bezels, 21 Led diodes per amber light. Designed at 10-30 DC Volts. These chrome plastic light bezels with visor helps you dress up your 2 inch by 6 inch trailer style rectangular LED lights. Note: this bezel mounts over your existing marker light. You may need to use a little silicone for a more stable hold.
  • 6" amber led marker lights 3 wires pigtails: 6 inch rectangle LED lamp for use as a combination turn signal lights and running lamps, can be installed anywhere you'd like to surface mount them. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker light (or only an auxiliary turn signal light) by using two wires and leaving the third wire unused.
  • This 6x2 led marker light is hardwired with 3 wire pigtails: White is ground, black is low brightness as marker lights or running lights, red is high brightness as turn signal lights.
  • Overall dimensions: 6" x 2.18" x 1.57" approx. and hole to hole distance: 4.92".
  • These 2x6 led trailer lights are universal for almost all 10-30 DC volts vehicles like truck trailers Motorhome or heavy trucks like peterbilt, kenworth, freigh....
Check Stock

Smoked Lens Corvette C7 LED Front Rear Side Marker Lamps for 2014 2015 2016 2017 2018 2019 Chevrolet Corvette Grand Sport Stingray Z06 ZR1 Red Amber LED Turn Singal Light Kits Sidemarker Lamps

  • ✅Function: Compatible with 2014-2019 Chevrolet Corvette C7 Grand Sport, Stingray, Z06, ZR1. Upgrade your Chevrolet Corvette C7 STINGRAY with a new fashion style smoke lens front and rear led side marker light. Elevates your muscle car's aura and even adds additional safety visibility features.
  • ✅Includes: 2/pcs driver side marker light kits and 2/pcs passenger side marker light kits. Amber front LED side marker lamp assemblies & Rear red LED side marker lamp assemblies for c7 corvette..
  • ✅Features: Smoke Lens C7 Corvette side marker lamps replacement., Powered by high power SMD LED diodes with amber LED on the front fenders and red LED on the rear fenders that form a perfect focal strip with a super bright lighting output.
  • ✅Installation: Direct plug and play installation, perfectly replace factory parts, no modification needed.
  • this product features as a replacement and upgrade for your Chevrolet front and rear side marker light..
  • ✅Package: 2pcs smoke lens Amber front led side marker lamps, 2pcs smoke lens Red rear led side marker lamps, DOT/SAE approved.
Check Stock

FUCDTEFC 3 Compartments Marker Organizer Wall Mount, Clear Acrylic Pen Holder for Wall, Dry Erase Marker Holder, Heavy Duty Marker Storage

  • 【3 COMPARTMENT PEN HOLDER FOR WALL】This marker organizer is made of acrylic and we made 3 compartments for it. The width of the acrylic marker holder: 7.5in, bottom thickness: 2.7in, top thickness: 3.5in, front panel height: 4.1in, back panel height: 5.5in, single compartment opening: 2.4in..
  • 【ELEGANT AND STURDY】This acrylic pen holder is fully transparent, it is a shiny and stylish decoration on any wall. Acrylic is a very hard and sturdy material, and the marker holder can stay with you for a long time..
  • 【WALL MOUNTED PEN HOLDER】This marker organizer is wall mounted to help you save space on your desk and in your cabinet. The marker holder comes pre-packaged with bolts, and of course you can use adhesive fixing (not included)..
  • 【KEEP YOUR DESKTOP ORGANIZED】This dry erase marker holder is the perfect storage item for your home, office, or school. The wall mount marker holder can sort and store your paintbrushes, whiteboard markers or other stationery..
  • 【QUALITY ASSURANCE】FUCDTEFC is a professional acrylic pen holder manufacturer. If you have any questions about this various wall mounted marker organizer please contact us and we will surely give you a satisfactory reply..
Check Stock

Partsam 2pcs 6" Amber LED Rectangle Tail Stop Marker Light Trailer Truck RV 3 Wires 21LED, 6x2 Rectangular Led Clearance Lights, 2x6 Big Side Marker Lights

  • Package includes 2 Pieces 2x6 inch Amber Rectangular Trailer Marker Led Lights 3 Wires Surface Mount, 21 Led diodes per amber light.
  • Sealed amber led Light, 3 Wires Setup, High Low Function. Other accessories are not included.
  • Compared with those similar side marker lights on market which can be used as led marker light only, this 6 inch rectangle LED lamp is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These are a really popular style thanks to their multi-faceted design.
  • Size: 6" x 2" x 1.4" approx. and hole to hole distance: 4.8". Dim Function draws 20 mA & Bright Function draws 110 mA approx.. This trailer clearance light is unversal for almost all 12V vehicles as well as the size fits.
  • This amber marker lights is HARDWIRED with 3 wires: Black is ground, white is low brightness as marker lights, clearance lights or running lights, red is high brightness as turn signal lights.
  • Commonly known as a trailer light, these 2" x 6" rectangular trailer lights can really be installed anywhere you'd like to surface mount them. It is going to fit perfectly on....
Check Stock

Partsam 14Pcs 6.5" Inch Amber LED Side Marker Lights Clearance 16 Diodes Surface Mount Led Cab Panel Lights Turn Signals Sealed Waterproof 12V

  • Partsam 14 Pieces 6.5 inch amber 16 diode LED marker lights - Amber Lens. These side marker lights function at 12 volts dc current. Each led marker light contains 16 high-flux LEDs and consumes less energy than incandescent lamps.
  • These oval led marker lights can be used as a combination turn signal and running lamp. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. This trailer marker light is a flush mount style light and Mounting hardware not included.
  • Dimensions: 16.5cm(6-1/2") x 5.5cm(2") x 2cm(3/4"). Hole to Hole Distance: 118mm (about 4-5/8").
  • can be function as marker light, clearance lights, turn signal lights.
  • fits in a combo-style hole and Chrome bezel hides mounting screws.
  • sonically-sealed lens and IP65 waterproof housing, please do not use it under water.
  • Different from many other truck marker lights in the market, there led marker clearance lights have a more modern, curvy shape and look great on your bumper, cab-and-sleeper kits, fender guards, and just about everywhere else you can imagine. Its long, thin footprint and flush-mount installation makes it a ....
Check Stock

Dixon Industrial REACH- Deep Hole Mechanical Pencil with Lead Refills included, Yellow (14301)

  • INCLUDED: This set includes 2 black permanent deep reach markers, 2 ink refill bottles, and 2 replacement tips all stored in a sturdy reusable case. Also called long reach / nib / nose marker..
  • PRECISION: The metal shaft is 3 mm wide, has a reach of 30 mm, and a felt tip of 2 mm that will provide the strictest precision. Perfect for use on most dry and wet surfaces..
  • HANDLING: Easy one-handed handling. Attach the clip to your pants or belt, place your thumb on the top of the clip, push with your thumb and pull with your index and middle finger until the marker releases from the cap..
  • INK REFILLING: Each marker is refilled with a few drops of ink from the included refill bottles. Simply remove the cap, unscrew the marker head, push the foam back into the barrel, and add at least 3 drops of ink..
  • TIP REPLACEMENT: If your tip wears down it can be replaced by removing and replacing the old tip with a pair of pliers. If the tip is too worn down to grip with pliers, unscrew the marker head, push the foam into the barrel, and then push the rear of the tip out from behind. Place the marker tip down in a cup and wait at least 5 minutes for the new tip to absorb ink. It is recommended to add 3 drops of ink to the foam barrel to speed up the felt tip....
Check Stock

Bicycle Euchre Playing Cards Bundle - 2 Euchre Decks in One Box with Suit Marker Dice & Velour Drawstring Bag

  • Bundle Includes: 2 Decks Bicycle Euchre Packed in One Box, Trump Suit Marker Dice & 1 Hickoryville Forest Green Velour Drawstring Bag..
  • This is a great set to play Euchre with your friends and family..
  • EUCHRE DECKS - Made for the game of Euchre and includes: 2 Decks with 9-Ace cards in 2 Colors, 4 sets of Scoring Cards, Printed on Bicycle Thin Crushed Card Stock for Superior Card Play. Bicycle Playing Cards are made in USA..
  • TRUMP SUIT MARKER - Measures 1.2" on all sides. Made of lightweight wood, the suit marker die has all 4 suits and 2 blank sides. Nicely finished, this marker helps you keep track of what suit is trump. Is it Hearts, Diamonds, Clubs or Spades?.
  • Hickoryville Velour Drawstring Storage Bag: Handy 5” x 7.5” pouch holds your Euchre Decks & Trump marker conveniently for easy travel or storage. Forest Green in color..
  • Since the Euchre deck only uses half of a normal deck of cards - TWO DECKS ARE PACKED IN ONE BOX..
Check Stock

HOWOD Pocket Hole Jig Kit, Professional and Upgraded All-Metal Pocket Screw Jig. (Metal)

  • INCLUDED: This set includes 2 black permanent deep reach markers, 2 ink refill bottles, and 2 replacement tips all stored in a sturdy reusable case. Also called long reach / nib / nose marker..
  • PRECISION: The metal shaft is 3 mm wide, has a reach of 30 mm, and a felt tip of 2 mm that will provide the strictest precision. Perfect for use on most dry and wet surfaces..
  • HANDLING: Easy one-handed handling. Attach the clip to your pants or belt, place your thumb on the top of the clip, push with your thumb and pull with your index and middle finger until the marker releases from the cap..
  • INK REFILLING: Each marker is refilled with a few drops of ink from the included refill bottles. Simply remove the cap, unscrew the marker head, push the foam back into the barrel, and add at least 3 drops of ink..
  • TIP REPLACEMENT: If your tip wears down it can be replaced by removing and replacing the old tip with a pair of pliers. If the tip is too worn down to grip with pliers, unscrew the marker head, push the foam into the barrel, and then push the rear of the tip out from behind. Place the marker tip down in a cup and wait at least 5 minutes for the new tip to absorb ink. It is recommended to add 3 drops of ink to the foam barrel to speed up the felt tip....
Check Stock

Speedball Elegant Writer Calligraphy 4 Marker Set, Black, 2.0 mm, 2.5 mm & 3.0 mm Chisel Nib Tip Pens for Drawing, Journaling, and Scrapbooking

  • WIDE RANGE OF ARTISTIC POSSIBILITIES - Featuring 2.0, 2.5 & 3.0 mm Chisel tip nibs offering artists unlimited lettering creativity.
  • CREATE BEAUTIFUL LETTERING PROJECTS - Ideal for making beautiful invitations, holiday cards, gift tags and more.
  • GREAT FOR BEGINNERS & CRAFTERS - Makes it easy to form calligraphic letters.
  • CRISP NIBS & ACID-FREE INK - Markers feature free-flowing, non-toxic, acid-free ink with the AP seal.
  • 4 MARKER SET - All black marker set includes (2) 2.0 mm markers, (1) 2.5 mm marker, & (1) 3.0 mm marker.
Check Stock