ReviewsMasonry Anchor Bolts

3/8\ x 2 1/2\ Lag Screw Expansion Shield Long Zinc Alloy Pk 300

  • Expansion shield anchor works with a lag screw to provide a secure hold in most materials including solid masonry, masonry joints, and uncracked concrete.
  • Anchor has an internally threaded body made of zamac alloy.
  • Meets Fed. Spec. GSA FFS-325C Group 2, Type 1, Class 2C specifications.
  • Ultimate tensile strength 420 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

PC Products PC-Concrete Epoxy Adhesive Paste for Anchoring and Crack Repair, Two-Part 102 oz in Two Pails, Gray 71021

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

PC Products 70086 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 1.4 oz in Applicator Syringe, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (30') | Best All in One Set with Injectable Filler for Repairing Cracked Foundations, Walls, Basements, Cement Structures

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

Shorpioen 100-Pack 1/4 x 1-3/4 Concrete Screw Hex Flanged White No Drill Bit BC-1428CNHFW

  • Building Code Approved. The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Blue ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2”.
  • The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Check the Item Description to see if a drill is included as well..
Check Stock

MroMax Expansion Lifting Eyebolt M10x60mm Eye Ring Bolt 3.54\ Length 304 Stainless Steel Expansion Bolts with Nuts Eye Hooks Anchor Fastener for Concrete Wall Masonry Ceiling Silver 2Pcs

  • 10 standard M6x80mm, please refer to the picture for detailed dimensions..
  • 304 stainless steel, corrosion-resistant, can also be used in humid places, strong and durable..
  • The expansion screw is a solid structure, and the punch is formed at one time, with a large bearing capacity and extremely strong tensile strength.
  • the expansion pipe is cut by seamless steel pipe, which has a large tensile force after expansion, which is strong and safe..
  • Application: This heavy-duty torque control shield anchor Hardware Tools for Wall Building is suitable for concrete masonry and solid brickwork,ceiling,expansion sleeve anchor bolt heavy duty fixing anchors suitable for fences, anti-theft, doors and windows, rain sheds, air -conditioning fixed, home decoration, engineering, etc..
  • Note: Expansion bolts must be installed on a relatively hard base plate, and the soft and easy to fall off places are unstable, such as the gap of the lime soil of the wall. All expansion pipes should enter the wall.. As long as the threaded part is long enough, the sleeve part will be deeper and stronger..
Check Stock

DRICORE PRO Concrete Repair High Strength Anchoring Epoxy Paste (6 Pack) | Fast Curing, Extra Strength - for Repairing Cracks and Signs of Cracking in Foundations, Walls, Basements, Pools, Cement

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock

VEVOR Handrail Outdoor Stairs 47.6 X 35.2 Inch Outdoor Handrail Outdoor Stair Railing Adjustable from 0 to 30 Degrees Handrail for Stairs Outdoor Aluminum Black Stair Railing Fit 3-4 Steps

  • Railings for Outdoor Steps- This Iron Stair rail is designed to be a hand rail outdoor (also great replacement for wooden handrails)..
  • DIY Iron Handrail- Designed to be installed yourself!.
  • Versitle Installation- Can be used as outside hand railing, outdoor handrails, stair rails, hand rails for stairways, front porch hand rail (we....
  • Parts Included- Anchor bolts, lag screws, masonry drill bit & hex screw bit (some 2021 inventory in warehouse has older gold version anchors and no....
  • NOTE: For sale is a 5.5 feet railing (Intended for 4-5 steps).
Check Stock

FOREVTL Dry Wall Anchors and Screws Kit - 32pcs Drywall Anchors Heavy Duty Includes 8 Different Assorted Size Anchors and Screws and Installation Plier with Organizer Box

  • Perfect Solution for Hollow Walls: Hang things up easily on drywall and plasterboard with this hollow wall anchor kit..
  • Convenient & Comprehensive Package: This molly bolts setting tool includes everything you need, so you won't need to worry about buying extra screws or tools. It comes with a hollow wall anchor setting tool and 32 molly bolts in 8 different sizes, all packed in a double-sided box for easy storage and use..
  • Durable and Safe Setting Tool: The molly bolts setting tool is made of 2.5mm thickened reinforced carbon steel with heat treatment for corrosion resistance and deformation resistance. The ergonomic, non-slip grip shape of the tool also helps to prevent injuries while using it..
  • High-quality and Versatile Molly Bolts: These zinc plated carbon steel bolts are heavy-duty and can be used both indoors and outdoors. They offer a holding power of 40-65 pounds depending on size, ensuring that your items stay safely and securely in place..
  • Easy to Use and Remove: Drilling the hole, driving the anchor into the drywall, backing the screw out about 1/4", mount....
Check Stock

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray (Fоur Расk, Gray)

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
Check Stock