ReviewsMasonry And Concrete Anchor Assortment Kits

uxcell 10Pcs 9mm-15mm Grip Range Toggle Hollow-Wall Anchor Screw Eye Assortment

  • Wedge anchor provides a secure hold in solid masonry and uncracked concrete.
  • Anchor consists of a 304 stainless steel body, washer, nut, and clip to provide more corrosion resistance than galvanized or zinc-plated steel anchors.
  • Meets Fed. Specs. QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code.
  • Ultimate tensile strength is 2,000 lb. at 1-1/4" embedment depth in 4,000-psi concrete with a static load.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

L-A M8x70 304 Stainless Steel External Hex Expansion Bolt Screw Sleeve Anchor Expansion Screw Bolt Burst (5 Pcs)

  • Standard size M8 expansion bolt, 70mm total length, with flat washer and hex nut..
  • High quality 304 stainless steel. Sturdy and firm, resistant to rust and corrosion. Concrete anchor and masonry anchor , easy to be mounted..
  • Widely used in fence,burglarproof doors and window,canopy,air conditioning rach fixation,home decoration,engineering,etc..
  • If the wall is built by relatively soft brick , it may need to make the hole which is 1mm smaller than the suggested..
  • Air brick, foam concrete block,are not suitable for these expansion bolts..
Check Stock

Plastic Wall Conical Anchors for use in Drywall, Hollow Walls and Concrete, Brick, or Masonry 10-12 X 1-Inch, 100-Pack

  • Horizontal fins prevent anchor from turning while screw is put in, Anchor expands and shims the screw.
  • For use in both hollow walls and concrete, brick, or masonry, Very high ease of use.
  • Also known as "Bantam" anchors. Kit Include a 100 #10-#12 blue anchors.
  • 1/4" Drill Size. Once anchor installed, they provide a flush, clean appearance in wall. Packaging design may vary..
Check Stock

E-outstanding Sleeve Anchor 10PCS 304 Stainless Steel Sleeve Bolts for Concrete, Masonry and Brick M6x70mm

  • Size: M6x70mm. Total length: 70mm. Sleeve length: 50mm. Screw diameter: 6mm. Sleeve diameter: 8mm..
  • Made of high-quality 304 stainless steel, corrosion-resistant, sturdy , durable and long service life..
  • Can be installed in various masonry, solid concrete, bricks or blocks..
  • The anchor needs to drill an 8mm hole in the base material (concrete, bricks and bricks), which should be drilled with a carbide drill bit and used for hammer drilling..
  • The hole in the fixing device or the material to be fixed must be larger than the specified diameter of the anchor. M6 diameter anchoring requires 8mm holes on the fixing device..
Check Stock

Hurricane Hardware Stainless Steel Phillips Combo Drive Stainless Steel Sidewalk Bolt Kit with Masonry Anchors - 24 Pieces

  • 1/4"-20 x 1-1/2" Phillips Slotted Combo Drive Sidewalk Bolts 18-8 Stainless Steel - 12 pieces.
  • 1/4"-20 Machine Screw Masonry Anchors - 12 Pieces.
  • Commonly used for storm windows and shutters to anchor into brick or masonry wall.
  • Fixtures can be removed or replaced without sacrificing holding power.
  • Corrosion resistant stainless steel screws with caulking type anchors designed to provide a quick setting in brick, concrete or stone.
Check Stock

M8 x 80mm 304 Stainless Steel Expansion Bolt 10-Pack External Hex Expansion Screw Bolt(10 pcs)

  • 1. Material : Expansion Sleeve Bolts made of 304 Stainless Steel, sturdy and firm , resistant to rust and corrosion..
  • 2. High Quality: Anchor Expansion is suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance..
  • 3. Standard size: M8x60mm expansion bolt. M8 Thread Diameter, Total Length 2.4inch, Expansion Tube Diameter 12mm..
  • 4. Easy to Install: Expansion Bolts come with nuts and washers. Concrete anchor and masonry anchor , easy to be mounted..
  • 5. Widely Application: Expansion Bolts is widely used in fence, burglarproof doors and window, home decoration, engineering, canopy and air conditioning rach fixation..
Check Stock

Concrete Anchors and Screws Kit 100Pcs Masonry Anchors and 100Pcs Masonry Screws with 1Pcs Corresponding Bit Blue Conical Anchors and Self Tapping Screws for Stucco Concrete Masonry Brick Wall

  • Premium materials: All the concrete anchors and screws are made of durable materials,The concrete screws are made of carbon steel and galvanized, Will not rust or corrode. and the thick PE material anchor is not easily worn and aged.
  • Convenient Installation: The masonry anchors and screws kit come with corresponding size drill bit, You can use it to drill just the right size hole on the wall, then knock the anchor in, and finally screw the screws in, without you having to think extra about what size tool to use.
  • Commonly used size: The #10 concrete screws is 35mm long, the concrete anchors is 36mm,it's not too long and not too short,It's suitable for you mount stuffs such as doorbells, curtain rails, pictures, mirrors, photo frames and lanterns on brick walls, concrete walls, drywalls, wooden walls and more.
  • Well Packed: The wall anchors and screws kit are well organized by a exquisite plastic gird box,very space-saving,and very convenient for you to use and save the screws and anchors..
  • Package Content: 100pcs screws,100Pcs screw anchors,1 Drill Bit..
Check Stock

Stainless Steel Concrete & Stone Drop in Female Expansion Anchors with Setting Tool 1/4 -20 x 1 Qty 20

  • 304 Stainless Steel Drop In Masonry Anchors with Matching Setting Tool.
  • Each pack contains one set tool designed to set the size of anchor.
  • Corrosion and rust resistant 304 Stainless Steel Drop In Anchors.
  • Installed crimped side down in a pre-drilled hole, then set with included tool.
  • Internal threads to anchor fixtures to concrete with bolts or machine screws.
Check Stock

Sipery Expansion Bolts 304 Stainless Steel External Hex Nut Expansion Screw Bolts Sleeve Anchor M8x60mm 8Pcs

  • Specification - 8Pcs M8x60mm Expansion Bolts, M8 Thread Diameter, Total Length 2.4inch, Expansion Tube Diameter 12mm..
  • Material - Expansion Sleeve Bolts made of 304 Stainless Steel, sturdy and firm , resistant to rust and corrosion..
  • High Quality - Anchor Expansion is suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance..
  • Easy to Install - Expansion Bolts come with nuts and washers. Concrete anchor and masonry anchor , easy to be mounted..
  • Application - Expansion Bolts is widely used in fence, burglarproof doors and window, canopy, air conditioning rach fixation, home decoration, engineering, etc..
Check Stock

XtremepowerUS 61117-XP Jack Hammer w/Chisel Shovel Bits Electric 2200W Demolition Construction Concrete Breaker Punch Drill

  • 【POWERFUL MOTOR】 AOBEN electric Rotary Hammer Drill is equipped with 13 Amp (1500W) motor that delivers powerful impact energy to complete heavy duty projects on concrete, Masonry and metal..
  • 【EASY TO OPERAT】 Three function modes can be easily switched - hammer only (chiselling-only), hammer drill (hammering and rotation), and drill only (rotation only) . There are double switch buttons to change the functions which can last longer compare with single switch button..
  • 【ERGONOMIC DESIGN】 AOBEN Roto hammer drill adopt ergonomic design with Rubber and 360 degree adjust handle provides a comfortable use feeling . SDS-plus hammer drill can guarantee the user’s safety and well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life..
  • 【TOOL KITS】 AOBEN hammer drill set include 3 pcs drill bits(size of 8mm,10mm and 12mm), 1 pc flat chisel, 1 pc point chisel, a dirt proof boot, motor lubricant, 2 pcs of spare carbon brush Portable Carrying Case provides the perfect storage..
  • 【MULTIFUNCTION】 AOBEN Professional rotary hammer ....
Check Stock

Kryptonite 16mm Bicycle Stronghold Anchor Bike Lock Black

  • PERMANENT LOCKING POINT for use indoors or outdoors to keep vehicles and bicycles safe.
  • Attach to solid concrete ground/walls, or to truck/trailer beds.
  • 16mm hardened CARBON ALLOY STEEL SHACKLE.
  • 5/8” cement anchor bolts installed directly into the cement.
  • Includes 2 MASONRY BITS (1- initial pilot hole, 1-final moly-bolt diameter).
Check Stock