ReviewsMasonry Block Reinforcement

Goldblatt 4 Pieces Tile Grout Masonry Mortar Bag Set, Includes 3 Pieces Tear Puncture Resistant Grout Bag & 1 Piece Brick Jointer for Tile Installation Work

【Durable Grout Bag】The 3 pieces mortar bags are made from heavy duty vinyl which is tear and puncture resistant, very strong and durable. They all have a heat sealed seam, ideal for use in grouting masonry or tile joints stone brick block.
【Easy Clean Up】The bag can be cleaned and is reusable depending on the material of application. Soak the masonry bag in warm water before use, and also clean off it after use for reusing the bag.
【Heavy Duty Mortar Jointer】Made of high quality steel, heat treated for maximum strength, surface spray to prevent rusting, will last for long lifespan. Size 1/2 in. & 5/8 in..
【Provide Convenience】Use this tile grout applicator to protect your hands from cement and other substances. Designed with premium stainless steel molded in tip it’s easy to squeeze out grout. (Note : The tips are separate from the grout bags.) Best use for grouting caulking masonry or tile joints stone brick mortar block cement piping bag projects.
【What You Will Get】Packaging includes 3 x bags and 1X brick jointer. Grout Applicator Bag Size: 13 inches wide opening and 24 inches in length. Brick Jointer Size: 11 inches in length and 0.8 inch in thickness.

Check Stock

1/4 Slotted Hex Washer Head Tapcon Style Masonry Concrete Screws Qty 1000 1/4 x 2-3/4

1/4" Diameter Slotted Hex Washer Head Masonry Screws.
Blue Ceramic Coating for Extended Corrosion Resistance.
Masonry Drill Bit Size: 3/16", Hex Driver Size: 5/16".

Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....

Check Stock

Kingthai 16 Inch Wet Dry Segmented Cutting Concrete Diamond Saw Blade for Masonry with 1 Inch Arbor

Arbor:1"(25.4 mm), Segment height .395"(10mm). Size is 16"x.125"x.395"/10mm..
Designed for: Brick, block, concrete, masonry and stone..
Main features: Fast cutting speed and wide universality..
Applicable models: Angle grinder, Circular saw, Hand-held power saw, Masonry saw, Dry, Wet..

Check Stock

Makita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile

✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application.
✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers.
✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | ....

Check Stock

Tapcon Scots 1/4 x 1-3/4 Stainless Steel Hex Head ClimaSeal Concrete Anchor Screws 3358407 | 100 Pack | Drill Bit Included

Tapcon anchors are masonry screws designed with Advanced Threadform Technology which cuts threads into all masonry materials including concrete, block and brick.
Rubber EPDM sealing washer "locks-out" moisture from building interior.

Check Stock

Simpson Strong-Tie THD50600HMG Titen HD Concrete Screw Anchor (Galv) 1/2\ x 6\ 20ct

Corrosion resistance and long lasting performance due to the EnviroSeal blue coating.
Deep threads provide superior holding strength.
Great for anchoring items to concrete, brick, block, or other masonry materials.
The diamond tip allows for superior penetrating into hard materials.
Package includes 100 screws and 1 masonry drill bit.

Check Stock

Fannie May Harry London Gourmet Chocolates S'mores Snack Mix Crunchy Cereal & Fluffy Chocolate-Covered Marshmallows - 18 oz.

Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
Bonds to "hard-to-coat" surfaces and can be top coated with almost any product..
Fully cures in temperatures as low as 35 °F..
Coverage: 300 - 400 square feet per gallon..
Low VOC and easy soap and water cleanup..
Excellent enamel holdout, providing a great base for an even topcoat finish..
Before painting, review the INSL-X STIX label for proper preparation and application tips..

Check Stock

Diamond Saw Blade 10, Dry or Wet timeriver Masonry Blade 10 Inch, Hot Pressing Process, High Durability, Tile Blade 10 Inch is Suitable for Cutting Masonry, Retaining Wall, Granite, Marble, Concrete.…

MULTIPURPOSE - 10" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.

Check Stock

Sabre Tools 1/4 Inch x 6 Inch Masonry Drill Bit, Carbide Tipped 5-Pack for Concrete, Brick, Stone, 1/4” Hex Shank, Impact Performance (1/4” x 6”, 5)

1/4” x 4” x 6" Masonry hammer drill bits 5 pack set – Ideal for use with Tapcon concrete screws.
1/4” Hex Shank Masonry Bit Set – Can be used with impact drivers and regular screw guns for added non-slip ability.
High quality masonry drill bits designed to work in.
Bit features U-flute with self-centering carbide tip, ensuring fast cut speeds and MAXIMUM life.
Our concrete drill bits have an optimized design, allowing material to quickly move out of the hole while bit remains cool.

Check Stock

Sabre Tools 3/16 Inch x 6 Inch Masonry Drill Bit, Carbide Tipped 10-Pack for Concrete, Brick, Stone, 1/4” Hex Shank, Impact Performance (3/16” x 6”, 10)

3/16” x 4” x 6" Masonry hammer drill bits 10 pack set – Ideal for use with Tapcon concrete screws.
1/4” Hex Shank Masonry Bit Set – Can be used with impact drivers and regular screw guns for added non-slip ability.
High quality masonry drill bits designed to work in.
Bit features U-flute with self-centering carbide tip, ensuring fast cut speeds and MAXIMUM life.
Our concrete drill bits have an optimized design, allowing material to quickly move out of the hole while bit remains cool.

Check Stock