ReviewsMasonry Saw

BINOTA Concrete Hole Saw SDS Plus Max Shank for Cement Brick Wall, Kit 40 65 80 100 125 MM

  • The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency..
  • The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better..
  • It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc..
  • The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on..
  • The core drill arbor of the hole saw is designed with SDS PLUS 110mm and SDS MAX 160mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses..
Check Stock

BINOTA Concrete Hole Saw SDS Plus Max Shank for Cement Brick Wall, Kit 30 40 65 80 100 MM

  • The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency..
  • The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better..
  • It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc..
  • The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on..
  • The core drill arbor of the hole saw is designed with SDS PLUS 300mm and SDS MAX 300mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses..
Check Stock

IVY Classic 26632 2' Carbide Grit Edge Hole Saw Kit, USA, 1/Card

  • Kit includes carbide grit hole saw, 3/8-inch mandrel and carbide masonry pilot bit.
  • Cuts ceramic tile, marble, slate and fiberglass.
  • Continuous rim of carbide grit ensures smooth cutting.
  • Carbide Grit Hole Saw Made in USA, Diameter 2-inch, Cutting Depth: 1-inch.
Check Stock

VEVOR Concrete Hole Saw Kit, 1-2/11', 1-3/5', 2-9/16', 3-5/32', 3-15/16' Drill Bit Set SDS Plus & SDS MAX Shank Wall Hole Cutter w/a 4-1/3' Connecting Rod for Concrete, Cement, Stone Wall, Masonry

  • ...35-degree pilot drill bit ensures you open the wall hole in precisely the right place every time. And the multi-edged blades of the hole saw are designed to make your drilling cleaner, faster, and more efficient. The chip removal hole can quickly remove dust, thus preventing clogging..
  • Premium Material: Hole saw for masonry is made of high-quality carbon steel. It is sturdy and durable. They are sharp enough to open the wall and wear-resisted. And the connecting rods with 40CR steel are rigid and not easy to break..
  • For most Hammer Drills: The shank of the connecting rod adopts SDS PLUS and SDS MAX design, which is compatible with four-hole and five-hole electric rotary hammer drills. They are compatible with hammer drills of Bosch, DeWalt, Hiltex, Makita, Goplus, etc..
  • Wide Application: This masonry hole saw can drill through common walls and floors made of brick, concrete, cement, and stone. It makes installing air conditioners, water pipes, water heaters, smoke pipes, sewers, etc. easier..
Check Stock

7" Diamond Turbo Blade Granite Diamond Blade for Granite Marble Porcelain Tile Wet/Dry Cutting

  • Thin turbo rim and core for a fast,clean chip-free cut..
  • Can be used on an angle grinder, circular saw, masonry saw and gas cut-off saw.
Check Stock

RYOBI Drill and Impact Drive Kit (95-Piece) with Carry CASE

  • KIT INCLUDES: 19 x Split Point Oxide Drill Bits, 1 x 1” Hex Shank Spade Bit, 4 x Carbide Tipped Masonry Drill Bits, 4 x Brad Point Drill Bits, 1 x 2-1/8“ Hole Saw, 1 x Hole Saw Mandrel, 5 x Hex Shank Nut Setters, 20 x 1” Insert Bits, 1 x Magnetic Bit Holder, 1 x Countersink, 1 x Center Punch, 1 x Hex Key, 1 x Carrying Case.
  • BLACK OXIDE COATING keeps some of these bits protected from corrosion and prolonged wear.
  • HOLE SAW MANDREL holds a hole saw and drill bit in place so you can bore holes for door knobs or locks with a power drill.
  • MAGNETIC BIT HOLDER holds drill bits for driving fasteners without a tool.
  • CARRYING CASE has mounting brackets and a handle for maximum storage and portability.
Check Stock

Meranti Aluminum Handrail for Indoor or Outdoor Steps and Stairs – Hand Rails for Elderly – DIY Complete Stair Railing Kit (3' Length, Black Textured)

  • This simple DIY handrail kit comes with everything you need for installation, including the aluminum rail, 2 wall mounts, 2 plastic end caps, and all necessary screws..
  • Upgrade to a modern railing for your stairs made of beautiful and durable powder coated aluminum, which looks great as either interior railing or as an outdoor handrail for stairs. Color selections that are listed as “Textured” have a slightly gritty and sandy finish for a better grip and a more matte aesthetic..
  • Whether you’re looking for handrails for outdoors steps, a handrail for indoor stairs, or a deck stair handrail, this aluminum stair railing is designed to look stylish and hold up in any environment..
  • Compatible with almost any wall surface including wood, stucco, concrete, brick, and vinyl..
  • Always check local building codes before installation. For installation of handrail to concrete or brick, some additional tools may be required (e.g. masonry drill bit and masonry anchor screws). Customize the length of the hand rail using a chop saw or hack saw..
Check Stock

3 inch concrete diamond hole saw - Granite Tile Masonry Stone Marble Wet Dry Core Drilling Coring Drill Bits by STADEA

  • Stadea 3 inch concrete masonry granite tile diamond hole saw bit core drill bit for stone coring core drilling cutting.
  • Wet Dry Drill/Core through Concrete, Granite, Masonry, Tile, Stone, Marble sharply with precision.
  • Aggressive and durable diamond segments, Segment Height 9 MM, Width 24 mm, Thick 3.5 mm.
Check Stock

FINGLEE DT Super Thin Diamond Saw Blade for Porcelain Tile Ceramic,Diamond Cutting Blade,with 7/8\ 4/5\ 5/8\ Arbor (4-1/2inch 1pc)

  • Diameter 4.5"(115 mm),inner hole 7/8"(22.23 mm), with ring adapters to 4/5"(20 mm) and 5/8"(16 mm)..
  • Super thin and unique X-style teeth for high performance,very tough and durable..
  • Dry or wet use on cutting porcelain, ceramic, tile and more..
  • Suitable for an angle grinder, circular saw, masonry saw and gas cut-off saw..
  • Do not use for dangerous and hazardous projects..
Check Stock

SKIL 79510 7-Inch Turbo Rim Diamond Saw Blade with 5/8-Inch or Diamond Knockout Arbor for Masonry

  • Diamond knockout that fits on dry cutting saws.
  • Fifty times longer life than standard abrasive blades.
  • For use on cutting cement block, fiber cement board, ceramic tile and other masonry materials.
  • Turbo rim diamond saw blades measures 7-inches.
Check Stock

Tekware Masonry Saw with Dust Extraction, 110V 5 in Circular Saw, Light Weight Circular Saw for Wood, Masonry, Tile, and Concrete

  • DUST-FREE DESIGN: Tekware masonry saw built in a smart dust collection system that reaches 98.76% dust absorbing effect, offers you a healthy work environment.
  • POWER & ACCURACY: Power 10.9 amp motor delivers the 12,000 RPM cutting power to cut through wood, or granite, porcelain, concrete and other stone materials.
  • HiGH CAPACITY: The power circular saws will cut up to 1.57"(40mm) depth cutting capacity, 3.92"-4.93"(100mm-125mm) saw blade diameter.
  • WIDE APPLICATION: This circular saw can be used for home decoration and industrial wall/floor grooves. You can cut grooves in concrete, brick, marble.
  • HEALTHY & LIGHTWEIGHT: The 7.87" (2m) dust suction tube and dust bag protect you from dust infestation. The saw weighs only 10.8 lbs for comfortable operating.
Check Stock