ReviewsMastercool Brake Line Flaring Tool

25Ft 3/16 Copper-Nickel Coated Alloy Brake Line Tubing Coil Kit Tube Roll with 16 Fittings

  • 25 Ft Roll x 3/16" copper-nickel alloy COATED OD Zinc plated steel brake line tubing with 16 assort fittings..
  • It won't rust, corrosion resistance, extremely easy to bend by hand and flare by simple tools..
  • The brake line is very flexible and very easy to bend and flaring to mount - you can manually bend our brake lines without the need for a bending tool.
  • It includes SAE flare Nuts and meets relative international standards..
  • With superior durable material and great performance for longer use..
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check Stock

Eastwood 3/16 Die Kit Replacement Brake Line Tubing Flaring Tool 45-Degree Single Double and Bubble Brake Flares

  • Flare Punch Set For Eastwood Pro Brake Tubing Flaring Tool.
  • Direct Replacement For Your Worn 3/16” Die Set.
  • Restores Like New Performance To The Eastwood Pro Brake Tubing Flaring Tool.
  • This Kit Includes The Op1 Punch Die, The Op2 Punch Die And The 3/16 Inch Die Plates To Make A Complate Kit To Refresh The 45 Degree Turret Head.
Check Stock

KOOPOOL Double & Single Flaring Tool Kit for Brake Line HVAC System with Tube Cutter Extra 7 Adapters,Brass Copper Pipe 45 Degrees Flaring Tool

  • 【Multifunction】This flaring tool creates 45-degree double or single flares. It can be applied to copper, aluminum, brass, magnesium, and other soft steel lines. Ideal for brake line, HAVC, air conditioning brass line and so on.
  • 【Durable Material】Yoke made of heat-treated steel material for maximum strength and longevity. Swivel made of chrome-plated alloy steel to reduce friction.
  • 【Applications】Double flaring tool kit suitable for: 3/16”, 1/4”, 5/16”, 3/8", 7/16", 1/2", 5/8" (5, 6, 8, 10, 12, 14, 16mm) single or double flares.
  • Tubing cutter has a 1/8” to 1-1/8” inches (3-30 mm) capacity with inner / outer reamer.
  • 【Tubing Cutter Included】Pipe cutter has 2 rollers and fold-away slide lock reamer deburring blade.
  • used to cut steel, aluminum, and copper tubing.
  • cutting wheel life and adjustment amount for each turn depends on material hardness.
  • 【Easy Storage and Portable】Heavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization.
Check Stock

HORUSDY 7 Dies Flaring Tools Set For Sizes 3/16' -3/4' Refrigeration HVAC 45 degree Heavy Duty Eccentric Cone Type Kit for Water Gas Refrigeration Brake Line Applications,

  • The clever clutch mechanism automatically prevents over-tightening.
  • Off-set yoke reduces friction and force required, working together to produce perfect SAE 45° flares every time on copper, brass, aluminum and other soft steel tubing. Will also flare hard copper, steel, stainless steel and brass through a wall thickness of 0.035 inches。.
  • It creates a perfectly smooth flare. Will not crush the tubing. Hardened steel flaring cone, eccentrically mounted in needle bearings, produces rolling action for even metal flow, giving uniform flare walls without galling. Ideal for Water, Gas, Refrigeration, and Brake Line Applications.
  • A single clamp screw provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort.
  • Pipe sizes for the Flaring Tool are 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4".
  • Silver flaring bars are heat-treated for durability and secure grip on tubing.
Check Stock

Fairmount Hydraulic Flaring Tool Set Expander Fuel Line Flare Metric Bubble

  • The Fairmount Hydraulic Flaring Tool Provides The Ability To Produce Repeatable, Perfect, Oe-Precision Brake And Fuel Line Flares In Steel And....
  • Works On 3/16 in., 1/4 in., 5/16 in., 3/8 in. & 1/2 in. Tubing.
  • Creates 45 Degrees Single And Double Flares.
Check Stock

Neiko 20657A ISO/Bubble Flaring Tool Kit

  • Designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.
  • Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
  • Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
  • Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm.
  • Includes blow-molded carrying case for organization and storage.
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Double Flaring Tool Brake Repair Brake Flaring Tools for 3/16 -1/2 Brake Flare Tool with Tube Cutter and Deburrer 32 PCS Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with a 45° flaring cone and φ 3/16 - 1/2 inch expanding dies and adapters, including, push connects, GM fuel lines, GM transmission cooling line, 45° and double flares, ISO bubble flares..
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as a pressure relief valve and no-leakage oil cylinder. You can easily operate this tool without effort..
  • Pipe Cutting & Deburring: The double flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging from 1/8" -5/8" quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a plastic toolbox, reducing the possibility of missing parts. It is compact and easy to carry..
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper piping. It is an excellent tool for repairs on vehicles or making lines off a vehicle, ideal for the refrigeration and ai....
Check Stock

ABN Bubble Flare Tool & Double Flaring Kit – Tubing Bender Flare Tool & Pipe Cutter (1/8in to 5/8in / 3-16mm)

  • MAKE DOUBLE & BUBBLE FLARES: The ABN Double Flare Kit & Bubble Flaring Tool create flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more.
  • Fixed head and angles make clean, precise flares.
  • Yoke type compressor with T-bar handle for firm grip.
  • For 3/16″, 1/4″, 5/16″, 3/8″, 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing.
  • QUICK & PRECISE CUTS: Use the included small pipe cutter to cut 1/8-inch to 5/8-inch (3-16mm) steel, aluminum, and copper tubing.
  • Pull back the blade and revolve the pipe while compressing.
  • 2 rollers prevent skipping and jumping for most consistent tracking.
  • Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut.
  • BUILT TO LAST: Swivel constructed from chrome-plated alloy steel to reduce friction.
  • Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion.
  • EASY STORAGE: Heavy-duty 11.9” x 2.8” x 9.2” inch (30.2cm x 7.1cm x 23.4cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization.
  • Includes double flaring and bubble flaring instruct....
Check Stock

TEMCo Industrial Universal Automotive Tube Flaring Tool Set Includes Push Connect Double Flare Fuel and Trans Cooler Dies TH1911

  • Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • GM transmission cooling line 3/8" and 1/2".
  • Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
  • Dies have an enlarged compression area to grip the dies better.
  • Flaring tool set includes a Stabilizing Arm for easy tube forming.
Check Stock

Eastwood Double Flaring Tool On Car Flaring Tool for 3/16 in Tubing for Car Repair Brake Fuel Line

  • This Is A Compact And Easy To Use 3/16 Tubing Flaring Tool That Can Be Used In The Tightest Of Areas To Repair A Brake Line..
  • Produces High Quality 45 Degree Double Flares.
  • For Use On 3/16" Steel, Nickel, And Copper Tube.
Check Stock