ReviewsMax Drill Dia 50mm

Tuanie Lnanqing-Seal Washer E-Type Circlips Carbon Steel M1.5 M2 M2.5 M3 M3.5 M4 M5 M6 Retaining Lock Washers for Shafts 65 Manganese Steel, Firmly and Durable (Inner Diameter : M6)

Price For: Each Prongs: - Clearance Dia. Free O.D.: - Height: - Item: Standard Retaining Ring Radial Wall: - Tensile Strength (PSI): 150, 000 Type: Internal Material: Stainless Steel Finish: Plain For Bore Dia.: 20mm Free O.D.: 21.50mm Thickness: 1mm Thickness Tolerance: -0.060mm Fits Groove Dia.: 21.00mm Groove Dia. Tolerance: +0.13mm.
Fits Groove Width: 1.10mm Fits Groove Depth: 0.50mm Clearance Dia. (Expanded): - Hole Dia.: 2mm Tensile Strength (PSI): 150, 000 Rockwell Hardness: RC47-51 Meets/Exceeds: DIN472 Country of Origin (subject to change): United States.

Premium M42 8% Cobalt Steel ,68-70 HRC (Rockwell Hardness Scale) ,Usually Give the Best Heat,Wear and Chip Resistance and Long Tool Life..
3 Steps Desigh for Cutting through Stainless Steel,Hard Metals,Aluminum,Plastic..
This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes..
The Sufficiently Sharp Bit Edge Can Cut the Metal Material into Long Strips of Iron Chips rather than Slowly Grinding Throng the Material with a Blunt Drill Bit..
19Pcs 135 Degree Split Point Drill Bits Includes :1mm(length:3.4cm) 1.5mm 2mm 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm(length:8.5cm) 5.5mm 6mm(length:9cm) 6.5mm 7mm 7.5mm 8mm(length:11.5cm) 8.5mm 9mm 9.5mm 10mm(length:13cm) [DIA 0.5mm Increments] ..

Price For: Each Includes: Body, Nut, Washer Meets/Exceeds: G.S.A. FF-B-588C, A.N.S.I. A58.1, A.S.T.M. B-633 Anchor Type: Toggle, Gravity Activated Type: T-Anchor Box Count: 4 per pack Head Style: Nut Ultimate Shear (Lb.): 1500 Ultimate Pullout (Lb.): 700 Thread Length (In.): .6 Size (In.): 1/4 x 1-3/4 Size: 1/4 x 1-3/4" Shank Length (In.): 1-3/4.
Max. Work Thickness (In.): 1 Hole Dia. (In.): 1/4 Grip Range (In.): 1 Bolt Dia. (In.) / Threads/In.: 1/4 - 20 Anchor Length (In.): 1-3/4 Anchor Dia./Drill Bit Sz. (In.)/TPI: 1/4 Country of Origin (subject to change): United States.

√ [1/8" Shank 1/4" Cutting Dia Carbide Rotary Burr Set] K Kwokker 10Pcs Carbide Die Grinder Bits. Shank dia: 3mm(1/8"), Cutting dia: 6mm(1/4"), fits dremel tool accessories and most small rotary tools. 10 different types of carving kit drill bits, meet your different needs..
√ [Hardness HRA85, Very Well Made And Tough As Nails, Nice Tungsten Carbide] Carbide burr set made of heat-treated durable carbide that lasts long working life, packed with nice plastic case for safety storage and protection..
√ [Safe And Efficient, Like a Hot Knife Thru Butter] VERY IMPORTANT: SINGLE-SLOT Tungsten carbide burrs drill bits, BEST FOR: Metal, cast iron, cast steel, carbon steel, alloy steel, stainless steel and so on.
GOOD FOR: wood, marble, jade, ceramic, glass etc. NOT FOR: EPOXY. PLEASE USE ROTARY BURR SET ON THE CORRECT MATERIAL TO AVOID DAMAGE TO THE PRODUCT DUE TO INCORRECT USE..
√ [This Is a Essential Rotary Burr Set] Grinding head for air die grinder. NOTE: When using the wood carving bits, make sure that the burr handle is fully inserted into the chuck and tightly clamped. Eye masks and gloves are reco....

FLEXIBLE SINGLE STEM: For brushing smooth or threaded blind holes, small tubes, drill holes, and confined spaces.
USEFUL FOR PREPPING: Remove burrs, chips, paint, coatings, and other build-ups from bores or passages.
WIDE VARIETY BRUSHES: Available in different brush sizes, fill materials, and configurations.
HIGH TENSILE STRENGTH: Steel fill brushes are great for working on carbon steel surfaces.
MADE IN THE USA: Brush dia 3/4 in, wire dia .006 in, stem dia 7/32 in, stem length 2-1/2 in, 2000 max RPM.

Price For: Each Includes: Body, Nut, Washer Meets/Exceeds: G.S.A. FF-B-588C, A.N.S.I. A58.1, A.S.T.M. B-633 Anchor Type: Toggle, Gravity Activated Type: T-Anchor Box Count: 4 per pack Head Style: Nut Ultimate Shear (Lb.): 3000 Ultimate Pullout (Lb.): 1000 Thread Length (In.): 1.8" Size (In.): 3/8 x 3-1/4 Size: 3/8 x 3-1/4" Shank Length (In.): 3-1/4.
Max. Work Thickness (In.): 2 Hole Dia. (In.): 3/8 Grip Range (In.): 1 - 2 Bolt Dia. (In.) / Threads/In.: 3/8 - 16 Anchor Length (In.): 3-1/4 Anchor Dia./Drill Bit Sz. (In.)/TPI: 3/8 Country of Origin (subject to change): United States.

Price For: Each Includes: Body, Nut, Washer Meets/Exceeds: G.S.A. FF-B-588C, A.N.S.I. A58.1, A.S.T.M. B-633 Anchor Type: Toggle, Gravity Activated Type: T-Anchor Box Count: 4 per pack Head Style: Nut Ultimate Shear (Lb.): 2300 Ultimate Pullout (Lb.): 900 Thread Length (In.): 1.1" Size (In.): 5/16 x 2-1/2 Size: 5/16 x 2-1/2" Shank Length (In.): 2-1/2.
Max. Work Thickness (In.): 1-1/2 Hole Dia. (In.): 5/16 Grip Range (In.): 7/8 - 1-1/2 Bolt Dia. (In.) / Threads/In.: 5/16 - 18 Anchor Length (In.): 2-1/2 Anchor Dia./Drill Bit Sz. (In.)/TPI: 5/16 Country of Origin (subject to change): United States.

FLEXIBLE SINGLE STEM: For brushing smooth or threaded blind holes, small tubes, drill holes, and confined spaces.
USEFUL FOR PREPPING: Remove burrs, chips, paint, coatings, and other build-ups from bores or passages.
WIDE VARIETY BRUSHES: Available in different brush sizes, fill materials, and configurations.
HIGH TENSILE STRENGTH: Steel fill brushes are great for working on carbon steel surfaces.
MADE IN THE USA: Brush dia 1-1/4 in, wire dia .008 in, stem dia 1/4 in, stem length 2-1/2 in, 2000 max RPM.

Price For: Each Includes: Body, Nut, Washer Meets/Exceeds: G.S.A. FF-B-588C, A.N.S.I. A58.1, A.S.T.M. B-633 Anchor Type: Toggle, Gravity Activated Type: T-Anchor Box Count: 4 per pack Head Style: Nut Ultimate Shear (Lb.): 1500 Ultimate Pullout (Lb.): 700 Thread Length (In.): 1.275 Size (In.): 1/4 x 2-1/2 Size: 1/4 x 2-1/2" Shank Length (In.): 2-1/2.
Max. Work Thickness (In.): 1-3/4 Hole Dia. (In.): 1/4 Grip Range (In.): 1 - 1-3/4 Bolt Dia. (In.) / Threads/In.: 1/4 - 20 Anchor Length (In.): 2-1/2 Anchor Dia./Drill Bit Sz. (In.)/TPI: 1/4 Country of Origin (subject to change): United States.