ReviewsMcu Process Design

LG MCU61861001 Genuine OEM Detergent Dispenser for LG Dishwashers

This LG MCU61861001 is a genuine OEM (Original Equipment Manufacturer) part manufactured to exact specifications.
Replacement Detergent Dispenser for LG Dishwashers is also called the Dispenser Assembly.
LG Detergent Dispenser is located on the inner door panel and holds the dishwashing detergent and rinse aid for release during the dishwashing cycle.
High quality OEM LG MCU61861001 Dishwasher Detergent Dispenser is manufactured with premium materials for durabilty and exact fit, be sure to follow instructions in installation manual when installing this part.
Repair your appliance with confidence when you choose Genuine LG OEM Factory parts.

Check Stock

EleksVU2 Analog VU Meter RGB Sound Level db Display Panel | EleksMaker Elekstube

Adopting MCU to process the audio signal, better to achieve exponential gain driver, provides ultra-wide input signal auto adjustment, the display effects can be greatly upgraded than the common VU meters in the market..
Reasonable and concise circuit layout, the power supply is only provide power to the driver board and VU meter, not pass through audio input and output circuit, the sound quality will not be interfered but only adding the dynamic visual enjoyment..
With auto gain adjustment, very easy to control most input signals and achieve better beating effects. Backlight function can be turned on or turned off, convenient to use, and the bright and warm light can decorate your desktop or live studio..
With standard stereo L/R RCA input and output, can compatible with most common audio device such as mobile phone, computer, CD players, preamp, power amplifier or studio mixers and so on, suitable for a variety of scenarios..

Check Stock

Nextion 4.3″ HMI Display Basic Series NX4827T043 LCD-TFT Resistive Touch Screen 480×272 Compatible for Arduino and Raspberry Pi, Nextion Display Suitable for Vehicle HMI, Home Appliance, etc.

【Cost-effective HMI Solution】The Nextion solution is the best balance HMI solution between cost and benefit with a low and decreased learning curve..
【Easy to Use】Nextion HMI display connects to peripheral MCU via TTL Serial (5V, TX, RX, GND) to provide event notifications that peripheral MCU can act on, the peripheral MCU can easily update progress, and status back to Nextion display utilizing simple ASCII text-based instructions..
【Free Programming Software】You can develop the HMI GUI project via the free Nextion Editor software, the easy Drag-and-Drop components and simple ASCII text based instructions will dramatically reduce the HMI project development workloads..
【Wide Range of Applications】Nextion can be widely used in Vehicle HMI, 3D Printer, Medical Device, Beauty Device, Production Line, etc..
【Quality and Safety Assurance】Nextion guarantees availability for a minimum of 5 years for all series products and is CE and RoHS compliant, and the Nextion technical support team provides responsive basic hardware technical service across all time zones..

Check Stock

Douk Audio Analog VU Meter Panel DB Sound Level Indicator for Amplifier Preamp Preamplifier

Adopting MCU to process the audio signal, better to achieve exponential gain driver, provides ultra-wide input signal auto adjustment, the display effects can be greatly upgraded than the common VU meters in the market..
Reasonable and concise circuit layout, the power supply is only provide power to the driver board and VU meter, not pass through audio input and output circuit, the sound quality will not be interfered but only adding the dynamic visual enjoyment..
With auto gain adjustment, very easy to control most input signals and achieve better beating effects. Backlight function can be turned on or turned off, convenient to use, and the bright and warm light can decorate your desktop or live studio..
With standard stereo L/R RCA input and output, can compatible with most common audio device such as mobile phone, computer, CD players, preamp, power amplifier or studio mixers and so on, suitable for a variety of scenarios..

Check Stock

ADPOW 5A 12V Automatic Smart Battery Charger Automotive Maintainer 7-Stages Trickle Charger for Deep Cycle Battery Car Marine Trolling Motor Boat Truck Lawn Mower RV AGM with Terminal Cleaning Brush

Intelligent Charging Mode: 7-stages automatic charging process [ Desulfation - SoftStart - BulkCharge - Absorbtion - TestMode - Recondition - Float] by MCU controller, the LED indicator provide visual feedback of battery capacity and diagnostic information accordingly, efficiently prolong the lifetime of the battery..
Wide Application: Charge fully drained 12V Pb/SLA/GEL/AGM/VRLA/sealed lead-acid batteries and WET/FLOODED for maintenance, including lawn mower, boat, car, electric vehicle, electric tools, ride-on toys..
Multi-Protection: Ensure ultimate safety protect against Short circuit/OVP/OCP/Overload/Polarity reversed,etc, full-loaded & burn-in test proved to be high efficiency and longevity..
Customized Design: Ultra-compact, portable and lightweight with the mounting holes, non-slipping and easy to carry.
Water and dust resistant make it more safe to use in any situations..
What you Get: Come with smart battery charger with DC Adapters, with lifetime quality warranty & 30 days refund & timely after-sale service solve all your problems..

Check Stock

Battery Charger，BMK 2/4A Smart Portable Battery Maintainer with Detachable Alligator Rings Clips Fast Charging Trickle Charger for Boat Car Motorcycle Lawn Mower RV SUV

【6V/12V 2/4AMP BATTERY RESCUE & RECOVER】[email protected],[email protected]/4A. Charges, maintains and repairs 6 volt and 12 volt AGM, GEL and WET batteries,....
【UPGRADED 2 REPAIR MODES】Designed with Repair Mode and Low- Voltage Repair Mode. Use repair mode for desulfation to repair slightly damaged....
【ADVANCED WINTER CHARING MODE & DIGITAL LCD SCREEN DISPLAY】 UPDATED winter mode to prolong the battery sevice life-span and ensure perfect....
【8-STAGE SMART CHARGING - FULLY AUTOMATIC BATTERY CHARGER】6V/12V battery charger operated with 8 stages automatic charging process by MCU....
【MULTI SAFETY PROTECTIONS - UPGRADED WITH 10A FUSE ONTO RING CONNECTORS】Made of high quality ABS, multi-protects of Short Circuit/ OV/ OC/....

Check Stock

Marvel Cinematic Universe 10TH Anniversary Thor the Dark World Thor and Sif 2-pack Action Figure

For ten years, the Marvel Cinematic Universe has been bringing the mightiest and most beloved characters to life on the big screen. In commemoration of this incredible cinematic collection of the world’s greatest super heroes and super villains, Hasbro has partnered with Marvel Studios to create the Marvel Studios: The First Ten Years line for Marvel Legends, including premium figures from across the MCU’s most patriotic, mystical, Hulk-busting, and dance-worthy blockbuster hits..
Collect Marvel Studios: The First Ten Years Marvel Legends figures to build the ultimate MCU collection!.

Check Stock

20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module

How to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protectio....

Check Stock

Keyboard USB Charger Charging Cable Cord Compatible for Corsair Keyboard, ZRK Royal KLUDGE RK61,HK GK61,Dierya DK61 Pro DK61E DK63 DK63N, Logitech MX Master 3 Anywhere 3, Keychron Keyboard

【89 Programmable Keys & 8 Macro Keys Based Hardware】Program all 89 keys or create 8 complex macros with the configuration software to take full command of your computer. A macro key can output 31 characters. Perfect not only for gamers, but also for so many other types of users including designers and video editors.
【Built-in MCU】After keyboard keys be set up, it will be automatically stored in keyboard's MCU, and no need reset the keyboard even replace the computer.
【Support 9 Kinds Key Program Types】 Normal/3-Layer/Mouse/Hotkey/Burst/Round-Robin/Continue/Jitter/Special Functions/Disable key types, different key type with different function.
【OEM Gateron Black Switches】OEM Gateron Black switches with trigger travel of 2±0.6mm, keystroke force of 60±15cN, plus full anti-ghosting ensures great feel and accuracy..
【Personalized Split Design】Split adjustable design allows the 2 keypads adjust to your body.
!!!! Best service guarantee: If you have any questions after receiving the goods, including how to use the operation, please feel free to contact our customer service. Xunlefei's customer service will try its best to help you..

Check Stock

Treedix DSO138 Oscilloscope DIY Kit Handheld Digital Oscilloscope 1msps Real-Time Sampling Rate 2.4 inch TFT Display

UPGRADED VERSION – The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div – 20V/div. Also, this updated version can be handheld..
DESIGNING TO YOUR NEEDS – Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated..
ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment quicker and easier..
ASSEMBLED FINISHED – AUKUYEE Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time..
WHAT YOU GET – You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided..

Check Stock

Khadas Single Board Computer, VIM3 Basic Amlogic A311D,Faster CPU,Neural Processing Unit for A.I.Switchable PCIe and USB 3.0,Dual Independent Displays,Dual Cameras(2+16GB)

High Performance: Amlogic A311D - x4 2.2Ghz Cortex A73, x2 1.8Ghz Cortex A53 12nm SoC fabrication process for low heat 2T2R AC Wi-Fi with RSDB Features Bluetooth 5.0 USB 3.0 Available Gigabit Ethernet with WOL support LPDDR4/X USB-C PD for heavy applications.
Neural Network Accelerator: NPU: Supports a maximum frequency of 800MHz at 5.0 TOPS INT8 inference up to 1536 MAC Internal L2 cache (512KB) and system workspace buffer (1MB) Supports all major deep learning frameworks including TensorFlow and Caffe.
Maker Friendly: Stackable Design Programmable MCU 3 Programmable LEDs (Blue, Red and White) XPWR for external Power button Onboard SPI Flash Khadas TST Khadas KBI.
Business Applications Dual independent displays with GSensor H.264 / H.265 Encoding Supports multi-video decoding up to 4Kx2K@60fps+1x1080P@60fps VIN Power Input.
Rich IO: 40 Pin GPIO Header (USB, I2C, I2S, UART, ADC etc) 8-ch I2S for Microphone Array application (over M.2 Connector) MIPI-DSI MIPI-CSI Designed with GPIO Extender Chip.

Check Stock