ReviewsMeasurement Pipe

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • 13 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • 13 GALLON TANK MEASUREMENTS 21” x 9” x 16”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section....
Check Stock

QWORK Car Hose Remover Pliers, Auto Fuel and Vacuum Line Tube Hose Remover, Separator Pliers Pipe Repairing Tool

  • Function: This Hose Remover Pliers can easily removes stubborn hoses on pumps,tanks, radiators,air cleaners, etc..
  • Suitable for: It is suitable for use with vacuum hoses or fuel lines that have a diameter measurement range from 5/32" to 1/2"..
  • Compatible Hoses: Compatible with a variety of difficult dis-assembly pipes such as trachea, power assisted tubing, heat radiating oil pipe, water pipe, etc..
  • High Quality: Made from premium steel, anti-corrosion, durable and not easy to break, for long term service..
  • 100% Satisfied Service: Enjoy a smooth&worry-free return service within a month. Any questions feel free to contact us, we will be here for you..
Check Stock

Rohn 25G Series 30' Basic Tower Kit

  • INCLUDES: (2) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *30' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Rohn 25G Series 20' Basic Tower Kit

  • INCLUDES: (1) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *20' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

eOUTIL Digital Level Angle Finder Waterproof IP65 Protractor Angle Gauge Inclinometer with V-Groove Magnetic Base/0~360 Degree

  • V-groove Magnetic Base: This magnetic V-groove base of digital angle gauge can be firmly attach to ferrous metal surfaces like pipe, steel construction framing, metal fabrication. Rugged durable aluminum frame for precision leveling measurement.
  • Absolute & Relative Measurement: This digital protractor has absolute angle measurement to test whether the working surface is on the level to check roof slopes, wheel alignment, etc. Moreover, this magnetic level lets you check the relative angles between the surfaces.
  • High Accuracy: Accurate to the ±0.1° at 0° and 90°.
  • ±0.2° at other angles. Displays angle and bevel readings in degrees, pitch IN/FT, mm/M, and percent slope. With reading hold function, it is convenient to record by this level digital inclinometer bevel box. Moreover, you can have an accurate measurement of the angles between two measured surfaces.
  • Backlight LCD Display With Audio Indicator: Featuring a large, bright LCD display you can easily read the measurements whatever the light conditions. The display value reverses automatically when the electronic level is upside down. Acoustic signal routing via beeps when you reached 0° or 90°.
  • IP65 Waterproof And Dust-proof Level: It has IP65 protection which makes it suitable for use in harsh ....
Check Stock

Portable, Progress Solar and Wind Powered Light Tower

  • Kit Includes (3) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *40' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • Features 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Ehdis Manometer Gas Pressure Tester Digital Air Pressure Meter Differential Pressure Gauge HVAC Gas Pressure Tester

  • This digital handheld manometers can measure the air pressure of the single pipe， or differential pressure of two pipes.it is suitable for measuring of ventilation and air condition systems,and widely use forgas measurement,calibration,and any trouble shooting of any gas pressure systems..
  • Ultra-low-power sensing & measurement with 32-bit MCU and 24-bit ADC make the measurement of air press faster and more accurately.Perfect for working on tankless heaters,Very handy to set gas pressures on electric valves,Using for service testing of gas pressure on domestic boilers, Measures Air Flow about your bathroom fan ect..
  • 12 Selectable Units of Measure (kPa, Psi, Kgfcm2, Ozin2, Bar, mbar, inHg, mmHg, InH2O, FtH2O, cmH2O, Pa) with function: Data Hold and Error Code - Response Time: 0.5 Sec..
  • Ehdis digital manometer has Dual Input that can test / measure the differential gas pressure with its provided twin input probes.Max / minimum record function.
  • Data save function, also has room temperature future..
Check Stock

Rohn 25G Series 50' Basic Tower Kit - Rohn 25G

  • INCLUDES: (4) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *50' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 21 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34” Longest Length (not including fittings) x 9” x 16” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....
Check Stock