ReviewsMeasuring Current Transformer

753 AC Voltage and Current Measuring Tools, AC80-300V/AC200-450V 100A Meter, Digital-Display Meter, AC Voltage Current Meter, Easy Installation,Stable Performance(AC200-450/100A)

  • No external AC transformer is required for measuring current within 99.9A..
  • Multi-functional digital-display meter can measure the AC voltage and current, active power, apparent power and power factor at the same time..
  • High measurement accuracy, stable performance..
  • Compact size and sturdy structure, easy installation..
  • Adopting high strength fire retardant material, safe and reliable..
Check Stock

KAIWEETS HT206B Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC Clamp Meter)

  • ...and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household..
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord..
  • NCV Defection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires.
  • The NCV button lies on the right side. Simply place your thumb on it and push..
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity..
  • Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36-Month product service provided. 7/24 Customer Service..
Check Stock

KAIWEETS HT206D Digital Clamp Meter T-RMS 6000 Counts Multimeter Voltage Tester Auto-ranging Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle AC/DC Current

  • ...Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household..
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord..
  • NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires.
  • The NCV button lies on the right side. Simply place your thumb on it and push..
  • Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity..
  • Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service..
Check Stock

Suraielec 200W Low Voltage Transformer with Photocell Sensor and Timer, 120V AC to 12V/15V AC Multi Tap, Outdoor Weatherproof for Landscape Lighting, Individually Controlled Outputs, Weatherproof

  • 【Photocell Sensor & Countdown Timer】Landscape transformer with dusk to dawn sensor automatically turns low voltage pathway lights on at sunset, and off when sunrise. With countdown timer setting, you can illuminate spotlights and deck lighting auto on at dusk , then off at 4, 6, 10 hours interval as needed. Convenient and energy efficient for daily use..
  • 【2 Zones for Independent Control】Suraielec outdoor light transformer is equipped with two independently controlled outputs, allowing to setup 2 different landscape systems all controlled with a single transformer. That’s, you can set your front yard lighting stay lit till dawn while the backyard lights is set to be off 6 hours after sunset. Control home lighting separately..
  • 【Easy to Program & Install】Easy to operate with a push of button, the outdoor low voltage transformer is designed with 3 lighting modes: manual on/off- auto on/off- on at sunset and off 4/6/10 hours later, choose any preferred mode by Zone button. Two mounting holes for hanging the transformer more steadily, compact enough for easy concealment after installation..
  • 【Memory Function & Works with Smart Plug】 The low voltage transformer retains pre-set mode memory after power outage, no need resetting. By switching it ....
Check Stock

Suraielec 120W Low Voltage Transformer with Photocell Sensor and Timer, 120V AC to 12V/15V AC, Landscape Lighting Transformer with 2 Independant Zones,Weatherproof for Pathway Lights, Step Light

  • 【Photocell Sensor & Countdown Timer】Landscape transformer with dusk to dawn sensor automatically turns low voltage pathway lights on at sunset, and off when sunrise. With countdown timer setting, you can illuminate spotlights and deck lighting auto on at dusk , then off at 4, 6, 10 hours interval as needed. Convenient and energy efficient for daily use..
  • 【2 Zones for Independent Control】Suraielec outdoor light transformer is equipped with two independently controlled outputs, allowing to setup 2 different landscape systems all controlled with a single transformer. That’s, you can set your front yard lighting stay lit till dawn while the backyard lights is set to be off 6 hours after sunset. Control home lighting separately..
  • 【Easy to Program & Memory Function】Easy to operate with a push of button, the outdoor low voltage transformer is designed with 3 lighting modes: manual on/off- auto on/off- on at sunset and off 4/6/10 hours later, choose any preferred mode by Zone button. Features memory function, transformer retains its last mode setting after power outage..
  • 【Multi-Tap Outputs & Overload Protection】120W landscaping transformer converts 120 volt current to a low voltage current ( Selectable 12V AC /15V AC), achieving a safe an....
Check Stock

Mini Mounted Point Set, 50 pcs.

  • The transformer has over current, over voltage, over heat protection.
  • With a drill bit, it becomes a hand drill, with a grinding wheel, it becomes a hand grinder, and with a milling cutter, it becomes a hand mill, very easy to use.
  • Wide application range and flexible to operate.
  • The handheld machine has seven standard grinding tools which is varied.
  • Suitable for processing wood, engineering plastics and soft metals.
Check Stock

ACEIRMC 8pcs HX711 Weighing Sensor Dual-Channel 24 Bit Precision A/D Module Pressure Sensor for Arduino Raspberry Pi Microcontroller

  • Analog Current Meter Module. Transformer can only sense AC.
  • This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals..
  • 3-wire electronic block interface, input 5V - GND. S pin is the output analog voltage value..
  • You can use jumpers to select the parallel output of the output to adjust the range of analog values that are output..
  • On-board 3P and 4P connecting interface for current signal output can be easily connected with your MCU development board.
Check Stock

PEACEFAIR PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter

  • SMALL AND LIGHT: This current transformer Built-in input coil.
  • SNAP JOINT STRUCTURE:The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • GOOD MECHANICAL PROPERTIES: Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • USED FOR ENERGY METER IN SPECIAL: Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied..
  • MINI SIZE:This is a mini split base current transformer.
  • it's the smallest one compared to the similar products (output 100MA)..
Check Stock

Beleeb 20Amp Variable Transformer Auto AC Voltage Regulator Power Supply, 2000VA Max, 0~130 Volt Output

  • a variable AC input to a transformer input DC bridge rectifier to produce a variable output.
  • The adjustable voltage transformers does not convert AC to DC. It requires an AC input and the output is also AC. Also, the unit will not affect the cycle rate from the power company. If your power system is providing 60Hz, the Variac auto transformer will not change that, the ouput will be an undistorted 60Hz. This unit is rated up to 20 Amps or 2KVA Peak (16A Continous)..
  • Power: 2000VA,Input voltage: 110V, Input current: 18A, Output voltage: 0-130V, Rated output current: 15.38A (Continuous operation for 2 hours, 003c10A can work continuously.
  • This variable transformer is the perfect speed controller. The speed is infinitely variable, and because a transformer doesn't chop up the AC waveform like electronic speed controllers do, there's no noise, humming, etc..
  • If you're planning on using this as an "industrial" or bench-top supply with heavy loads, I'd recommend examining the brushes and adjusting the spring pressure on the windings. This can improve performance by reducing brush-contact sparking. Otherwise, this device is ready to work right out of the box..
Check Stock

Doorbell Transformer, 16.7 ft Charging Cable 18V 500mA Video Doorbell Power Supply Adapter Compatible with Ring Doorbell/Zmodo Doorbell (Black)

  • 【Product Features】18V Doorbell Transformer, plugs into your standard 110 v/120 v outlet and converts to 18 volt 500 ma AC current. No more need to take your doorbell down to charge. Video doorbell Transformer can keep your device constantly powered..
  • 【Compatibility】18V 500mA Doorbell Transformer compatile with Zmodo smart greet wifi doorbell / Nest Hello doorbell.(Before purchasing, Please confirm that the voltage and current required by the doorbell are consistent with this power supply.).
  • 【Extra long cable】16.7ft is long enough, it can connect to your doorbell perfectly, don't worry about the distance between the socket and the doorbell..
  • 【Easy to install】(Regardless of positive or negative polarity).Simply attach the two rings to the doorbell and tighten the screws. The wire ring design makes it easier to install and helps ensure the Transformer is firmly connected to the doorbell. The wires are sturdy and flexible enough not to be easily torn..
  • 【After-sale service】: If you are not completely satisfied with our products, you can ask for a replacement or a full refund.If you have any questions, please feel free to contact us..
Check Stock

Leviton 1K240-2W Series 1000 120/240V 200A 1P3W Indoor Kit with 2 Split Core CTs

  • Electricity tariff support 4 decimals, the decimal point can be set to 0 between 4. It supports 3 charges: simple tariff, time-sharing tariff and stage tariff. Time-sharing tariff support 8 time periods to calculate the cost, which can be used for peak and valley billing. Stage tariff support 8 stages power rates. You can set the date that begin to charge the stage billing.
  • It has the function of alarm, you can set values for voltage, current, or power. If they were exceeded, the monitor will alarm automatically.
  • It has the function of clearing the total electricity, history data and factory reset.
  • It supports 1000:1 or 2000:1 current transformer, the max current of the transformer is 120A.
Check Stock