ReviewsMeasuring Gauge

Shankly Dial Bore Gauge 0.001m Deep Engine Hole Cylinder Measurement Inside Micrometer Gage Cylinder Tool Kit 2m to 6m Comes with Carrying Case for Bore Measure

  • ✅ ACCURATE & PRECISE: This dial bore gauge is primarily used by machinists to precisely measure the inner diameter of bores in motor engines. When measuring cuts or hole sizes, a dial bore gauge's speed and accuracy can save a lot of time.
  • ✅ MEASURING RANGE: With this dial gauge, you can easily and accurately measure cylinder bores for taper. They have a measuring range of 2-6m and 0.001m and are equipped with a self-centering guiding protective bridge for dependable and repeated use.
  • ✅ WELL-CONSTRUCTED ENGINE TOOL: A dial bore gauge that is built to be irreplaceably reliable and precise, allowing for more efficient and trouble-free repairs. This premium bore gauge is built to last.
  • ✅ HEAVY-DUTY CARRYING CASE: Our bore gauge comes neatly in a tidy blow molded case with a built-in handle and slide latches that will make it simpler for you to keep track of each tool and arrange the entire set.
  • ✅ SATISFACTION GUARANTEED: We stand by the term "quality," and all of your items will arrive in good condition when you order from Shankly. Please contact us if you have any questions about your purchase. We will gladly assist you.
Check Stock

Stair Treads Gauge Template Tool - Stair Jig Measuring Stair Tool Shelf Scribe Tool for Stairs Risers Shelf and Cutting Drywall 11 in to 60 in Step Doctor Stair Tool Box

  • 【 Accurate Stair Measuring Tool】Our Stair Measuring Tool allows the treadle installer to easily operate and adjust to the correct length and....
  • 【 Adjustable Stair Gauge】Our Stair Gauge can easily adjust the angle, length and height to meet any work requirements. Adjustable range is....
  • 【 Easy to use】The length of our Stair Measuring Tool can be easily adjusted with four knobs and locked firmly in place. Insert the tool between....
  • 【 Durable Material】Our Tread Template Tool is made of high-quality stainless steel and aluminum alloy, and the surface is anodized to prevent....
  • 【 Scope of Application】Our Stair Tread Gauge Template Tool is suitable for cutting and measuring stair treads, stairs, risers, shelves, window....
Check Stock

SAE and Metric Bolt Gauges Check-a-Thread Nut Fastener Size Tool

  • ✿America SAE type measuring range: 4 - 84, Metric & America SAE Type & British Metric: 0.25 - 6.0mm, Imperial: 4G - 62G US: 8, 10, 11, 14, 19, 28.
  • ✿Made of stainless steel, the toothed edges are sharply defined and the numbers are stamped and easy to read, ensure the accuracy of measurement.
  • ✿Thread pitch gauge is used to check whether the dimensions of molds, machines and mechanical threads are correct. Center gauges are used for grinding and positioning threaded cutting tools on lathes.
  • ✿Including: 3 x Center Gauge + 1Pc America SAE Type Gauge + 1Pc Metric and Imperial Gauge.
  • ✿Use for check the thread size, can be used for measuring the metric, imperial and American SAE type screw thread.
Check Stock

Utoolmart Hole Gauge Set 1/8 inches - 1/2 inches Small Telescoping Full-Ball Ball Gages 4 Pieces

  • Made of stailess steel. The body is knurled for easy gripping..
  • Locking device at the end of hole gauge for adjustable measuring range..
  • This hole gauge is availble for measuring holes and grooves in woodworking, metalworking and patterning applications..
  • Package includes 4 pieces hole gauges and one storage bag..
Check Stock

Sew Tech Premium 5in1 Sliding Sewing Gauge Ruler with Hem Gauge, Seam Gauge, Buttonhole Guage and Circle Function for Accurate Sewing Quilting Measuring and Marking, with a Sewing Seam Ripper

  • 5 Functions in 1 Gauge - Sew Tech sliding sewing gauge is adjustable and super functional, can be used as hem gauge, seam allowance gauge, buttonholes gauge, "T" gauge, and circle compass.
  • Upgraded Locking System - Sew Tech sewing gauge ruler’s sliding part always lock in place securly and keep your desired measurement through our improved locking system, helping to prevent accidental movement of the sliding part and wrong measurement.
  • Accurate Measurements - Sew Tech sliding guage ruler features a clear scale, allowing you to mark even lines easily. The 1/8’, 1/4’, 5/8’ marked in black lines at the end of the sewing rulers helps you to measure and mark precisely.
  • Premium Quality - Sew Tech measuring gauge is made of selected high-quaility plastic, durable and capable for a long time use.
  • An Extra Sewing Seam Ripper Included - Sew Tech sliding gauge is a versatile tool suitable for sewing, quilting, waving, measuring, stitch work. It is a perfect gift set that comes with a sewing seam ripper for your family and friends who love sewing, card-making, paper artworks, or DIY crafts.
Check Stock

GemRed 82412 Mini Digital Level Angle Gauge Angle Finder Protractor Inclinometer Aluminum Framework with Magnet

  • 【Great Repeatability and Consistency】This angle gauge is designed with accuracy of ± 0.2° and the resolution is 0.1°. The measuring range: 0 to 360° (4*90°). Display unit: DEGREE only. It provides convenience in woodworking, construction, machinery, telecommunications, automobile etc. It is pre-calibrated in factory..
  • 【Strong Aluminum Framework&Magnetic Flat Base】The digital angle gauge applied sturdy aluminum alloy instead of plastic for the main framework. It’ll provide years’ usage.【Two Measuring Mode】①Checking the true level. ②Checking the relative angle between two surfaces..
  • 【Lower Power Reversible LCD Display with ERROR indicator】 The Digital Angle Gauge has a large LCD display with backlight, which only needs one battery for providing accurate, quick and clear measurements and even you can easily read in dark environment. If the digital angle gauge is used in an incorrect position (e.g. tilts diagonally over 30 degree), display will tell ERROR to make sure that use is getting the accurate measurement..
  • 【Easy Battery Installation】You can install battery easily and need no screwdriver. WIth only one AAA battery, the digital angle gauge works 50 hours averagely. *Automatic shut-off after 5 minutes..
Check Stock

5 Pcs Thread Pitch Gauges Measure Tool Set,Stainless Steel Thread Gauges 3 Pcs 55 & 60 Degree Metric System Centre Gage + 51Pcs America SAE Type + 52 Pcs Metric & America SAE Type & British Whitworth

  • 【Clear Marking】 : There is a small hole at both ends, which is convenient for adjustment and disassembly with screws. You can easily rotate the thread pitch gauge blade where you press the tooth thread gauge. The numbers are clearly marked and easy to read..
  • 【Material】 : Screw gauge tool set is made of stainless steel and processed with chrome finish. Surface polished smooth, applying anti-rust oil to prevent rust.good resilience, elegant appearance..
  • 【Measuring Range】: 51 pcs America SAE type measuring range is 4-84.
  • 52 pcs Metric & America SAE Type & British Whitworth Metric is 0.25-6.0mm, Imperial is 4G-62G US: 8, 10, 11, 14, 19, 28..
  • 【Suitable Scenarioos】 : Thread pitch gauges set usually used to check whether the size of the mold, machine and mechanical thread is correct.
  • use thread gauges blades of different sizes to accurately measure internal and external threads.
  • center gauge is used to grind and position thread cutting tools on a lathe..
  • 【What You Get】: 1 x American SAE type pitch gauge 60°, 1 xBritish Whitworth metric system pitch gauge 55°, 2 x center gauge 60°, 1 x center gauge 55°..
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Measuring (0.02-1.00 mm,Short 17 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 17 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0008 inch/ 0.02 mm to 0.0394 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.02, 0.03, 0.04,0.05,0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25 0.30, 0.40, 0.50, 0.75, 1.00.
  • Inch sizes: 0.0008-0.0394 inch, various sizes bring convenience when measuring.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

BIGTEDDY - 5in1 Handy Sliding Sewing Gauge Quilting Tools for Beginner Work as T-Gauge, Hem Gauge, Seam Allowance, Buttonhole Spacer and Circle Compass

  • Accurate - Adjustable from 0 to 6" in 1/8" increments.
  • Handy - The gauge is about 7" long, and light weight, good to keep one in sewing tools bag.
  • 5 in 1 - This compact gauge serves 5 functions, T-Gauge, Hem Gauge, Seam Allowance, Buttonhole Spacer and Circle Compass.
  • Two Edge Measuring System - Makes it easy and fast to add seam allowances to patterns or mark lines on fabric. Good for DIY craft and patchworking.
  • All Purpose - For sewing, quilting, knitting, crochet, and embroidery. Used for measuring and checking.
Check Stock

4 Pcs Double Sided Wire Metal Sheet Thickness Gauge Wire Measurement Tool Portable Metal Gauge Thickness Tool Double Sided Plated Size Inspection Tool Welding Tools Accessories

  • Utterly Legible Number Scales: double sided scale is deeply engraved with black lettering.
  • The double sided design allows you to read the markings easily from all directions.
  • You can see the number clearly without squinting.
  • Long Service Life: the metal thickness gauge is made of quality stainless steel, sturdy and reliable, rust and corrosion resistance, which will support you for a long time use, avoid frequent replacement.
  • Nice Measuring Function: you can use this sheet metal gauge measuring tool to measure the thickness or wire diameter before welding or working, then quickly and accurately get the welding thickness, which will help you to do nice work and avoid unnecessary errors, saving you more time and effort.
  • Easy to Read: this welding metal gauge features double sided laser engraving, which has clear scales and numbers, is not easy to wear, helping you to read the data easily and marking the nice cut place.
  • Widely Applicable: sheet metal thickness gauge can be widely applicable for measuring plate iron, steel, leather, paper, wood and more, which is a practical tool and accessory for welding and measurement.
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Gap Measuring (0.05-1.00 mm, 20 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 20 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.002 inch/ 0.05 mm to 0.04 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.05 to 1 mm, various sizes bring convenience when measuring.
  • Inch sizes: 0.002, 0.004, 0.006, 0.008, 0.010, 0.012, 0.014, 0.016, 0.018, 0.020, 0.022, 0.024, 0.026, 0.028, 0.030, 0.032, 0.034, 0.036, 0.038, 0.040.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock