ReviewsMechanical Voltage Regulator Nissan

PISCISD 74519-88 HARLEY Voltage Regulator Rectifier Fit ForHarley Davidson Softail Springer，Big Twin，CVO Dyna FLT,Heritage,Low Rider,Road Glide 2009-2013, Road King 1994-1996 2009-2014

  • COMPATIBLE MODELS: Voltage Regulator Rectifier for Harley-Davidson CVO 2014, fits for Harley-Davidson Dyna 1991-1999, fits for Harley-Davidson Dyna Glide 1992, fits for Harley-Davidson Electra Glide 1989-1996 2009-2014, fits for Harley-Davidson Fatboy 1990-1999, fits for Harley-Davidson Heritage Softail 1989-1999, fits for Harley-Davidson Heritage Springe 1997-1998, fit for Harley-Davidson Low Rider 1989-1992..
  • OEM NUMBER: Replaces HARLEY-DAVIDSION voltage regulator part numbers:74519-88,74519-88A,H1988,Please check OEM number before buying..
  • HIGHT QUALITY: Voltage regulator rectifier ueses original stabilivolt and advanced heat conduction system to control the output. Voltage stabilize at 12V to Protech Battery System, Lights,Reduce Load, and Extending Mortorcycle Service Life.ALL Regulators have been Tested Strictly to make sure every regulator have original HARLEY regulator Performance..
  • GOOD MATERIAL:Voltage rectifier regulator use high quality aluminum Shell , highest grade and thick aluminum substrate , high-performance electronic components..
Check Stock

uniquegoods 6V 12V 24V 28V 3A 80W DC Motor Speed Controller (PWM) Speed Adjustable Reversible Switch 1203BB DC Motor Driver Reversing

  • 80A CURRENT---The speed controller regulator is of new two-way large power silicon controlled rectifier and the current can be up to 80A, which is a good solution to over-current of electric stove wire caused by low resistance during cooling.
  • STABLE & DURABLE---This voltage regulator is adjusted with button which is much more stable than potentiometer. Voltage regulator has wave voltage absorbing circuit and effective protects large power silicon controlled rectifier, longer service life and more durable.
  • HEAT DISSIPATION ENHANCING---Designed with large and thick heat sink, the speed controller regulator can enhance heat dissipation more effectively.
  • OUTPUT VOLTAGE ADJUSTING---The speed controller regulator can easily adjust the output voltage on a scale of 0-100% (nonlinear) to power electric device.
  • WIDE APPLICATION---The speed controller regulator can be used as power supply for large electrical devices of less than 10000W, enough for household appliances or for small factory, could be widely used as heat controller on electric stoves, water heaters, light dimmer on lamps, speed controller on small motors, or temperature controller on electric soldering iron, etc.
Check Stock

10000W SCR Digital Voltage Regulator,AC 220V 80A Electrical Motor Speed Controller Regulator, High Power Voltage Regulator Dimming Thermostat

  • 10000W resistance load limit power, room temperature for a long time is recommended to be used within 5000W, voltage regulation: AC 10V to 230V (adjust begin 20V), this is an easy-to-use voltage regulator that can control the brightness or speed of the light. Use a new bidirectional high-performance thyristor. The current can reach up to 100 A, and solves the problem of overcurrent caused by small resistance when the induction cooker cable is cooled..
  • 10000W SCR voltage regulator standard aluminum housing safe and durable super power electronic voltage regulator. It is widely used in resistive loads, such as heating wires, incandescent lamps and most (not all) single-phase AC motors..
  • 10000W speed controller operating voltage AC 110V-230V. Maximum power 10000W (resistive load), long term operating power 7000W. Voltage adjustable from AC 0V to near input voltage. Full copper 75A super large current terminal. The trigger circuit is unique, the control voltage is accurate and there is no hysteresis, the resistive load is turned off to 0, and after starting, it will be adjusted from 10V, adjust to the supply voltage that is closest to the input..
  • Connect the SCR voltage regulator to the front of the circuit of the electrical appliance. The ''input' and """"....
Check Stock

2PCS Logo Projector Car Door LED Lighting Entry Projector for Nissan

  • 1.Easy to instal Just taked out the your old light and insert this product without change wires or drill hole.All of our LED bulbs are designed for easy DIY installation & direct replacement..
  • 2.Compatibility: Applicable to Nissan Altima Coupe 2008-2013.
  • Nissan Titan 2003-2020(Note. Before purchasing, you must first confirm whether the car has original door lights, if not, it is incompatible).
  • 3.The Nissan logo will be displayed on the ground when you open the car door and it will be turn off when you close the door..
  • 4.Pack of 2 pieces--led door logo light for Nissan.If You Would Like to Use In 4 Car Doors, You Need To Buy 2 pairs Of Nissan Car Door Lights..
  • 5.HIGH TECHNOLOGY: PLUS version of Nissan logo of door light, Cree LED, Voltage:12V with 1800L.This is the latest version,Solved the problem that most car door light's logo will fading when use 1-3 months in the market.
Check Stock

20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module

  • ... to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
  • AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
  • Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
  • Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
  • Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
  • Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protection, ....
Check Stock

Xenon HID Headlight Ballast Control Unit with Igniter & D2S Bulb - Compatible with Nissan Altima, 350Z, Maxima, Murano, Rogue, Infiniti G35, G37, FX35- Replaces 28474-8991A 28474-89904 NZMNS111LAN

  • HID HEADLIGHT BALLAST REPLACeMENT - Also known as headlight control unit, a crucial part of hid lighting system, provides the voltage needed to start the lamp and regulates the electrical current of the light once it is lit. A failed ballast will cause your bulb to burn. When the voltage is input, the output power of the ballast can be kept constant at about 35W or 50W to protect the HID bulb from damage. The ballast fits either the left or right hid headlights..
  • FIT THE FOLLOWING VEHICLE - The hid ballast compatible with 2008-2013 Infiniti EX35 EX37, 2004-2013 Infiniti FX35 FX37 FX45 FX50, 2003-2013 Infiniti G35 G37, 2012-2013 Infiniti JX35, 2005-2013 Infiniti M35 M37 M45 M56, 2004-2014 Infiniti QX56 QX70, 2003-2009 Nissan 350Z, 2009-2014 Nissan 370Z, 2007-2014 Nissan Altima, 2009-2014 Nissan GT-R, 2004-2014 Nissan Maxima, 2004-2014 Nissan Murano, 2008-2013 Nissan Rogue.
  • REPLACe PART NUMBER - The ballast replace Nissan 28474-89904 2847489904 28474-8991A 284748991A 28474-8991B 284748991B 28474-89907 2847489907.
  • replace Matsushita NZMNS111LANA NZMNS111LBNA NZMNS111LANH NZMNS111LANG. Compatible with Infiniti g35 ballast is a perfect solution Compatible with your Nissan 350Z 370Z 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Murano....
Check Stock

CKT3800-400 Touch Screen Dry Block Temperature Calibrator, Dry Type Temperature Calibration Furnace Temperature Range 50℃~400℃

  • Note: This product series's input supply voltage is 220V, currently it does not support 110V input voltage, if end user's country use 110V input voltage, need to buy the 110-220V converter or regulator, buyers can buy the converter from us or buy a regulator locally. For 220V input voltage country, no need to buy the converter/regulator..
Check Stock

Voltage Regulator Rectifier For John Deere 355D GT242 GT262 GT275 Lawn Tractors

  • ★100% Brand new high performance Voltage Rectifier Regulatorand All parts are tested and quality controlled prior to shipment.
  • ★Replacement Part Numbers: M70121,M97348,21066-2056, 21066-2070,SH578-12, SH626-12.
  • ★This Voltage Rectifier Regulator is made up of high quality aluminum , highest grade lamination materials,higher grade of electronic components.This rectifier has overheat protection , help to dissipate excess voltage,prevent over-charging battery , improved heat sink and charging capabilities.
  • ★This Voltage Rectifier Regulator is made up of high quality aluminum , highest grade lamination materials,higher grade of electronic components..
  • ★Package including: 1 X Voltage Rectifier Regulator as images display.
Check Stock

CKT3800-150B Touch Screen Dry Block Temperature Calibrator, Dry Type Temperature Calibration Furnace Temperature Range -30℃~150℃

  • Note: This product series's input supply voltage is 220V, currently it does not support 110V input voltage, if end user's country use 110V input voltage, need to buy the 110-220V converter or regulator, buyers can buy the converter from us or buy a regulator locally. For 220V input voltage country, no need to buy the converter/regulator..
Check Stock

CKT3800-150A Touch Screen Dry Well Block Temperature Calibrator, Dry Type Temperature Calibration Furnace Temperature Range -20℃~150℃

  • Note: This product series's input supply voltage is 220V, currently it does not support 110V input voltage, if end user's country use 110V input voltage, need to buy the 110-220V converter or regulator, buyers can buy the converter from us or buy a regulator locally. For 220V input voltage country, no need to buy the converter/regulator..
Check Stock

28474-89904 Xenon HID Headlight Ballast Control Unit with Igniter & D2S Bulb Compatible With Nissan 350z 370z Altima Murano Rogue Infiniti G35 G37 Fx35 Qx56 Qx70 -Replaces 28474-8991A NZMNS111LAN

  • HID HEADLIGHT BALLAST REPLACeMENT - Also known as headlight control unit, a crucial part of hid lighting system, provides the voltage needed to start the lamp and regulates the electrical current of the light once it is lit. A failed ballast will cause your bulb to burn. When the voltage is input, the output power of the ballast can be kept constant at about 35W or 50W to protect the HID bulb from damage. The ballast fits either the left or right hid headlights..
  • FITMENT VEHICLE - The ballast compatible with 2003-2009 Nissan 350Z Coupe, Nissan 350ZR Roadster, Infinity M35 / M45.
  • 2011-2013 Infiniti QX4, G37, M37, M56, QX56, 2010-2016 Nissan 370Z, GT-R, 2007-2010 Nissan Altima, Infinity G37 Sedan, 2003-2008 Infinity FX35, Infinity FX45, 2004-2010 Nissan Maxima, Infinity QX56, 2005-2006 Infinity Q45, Infinity G35 Sedan, 2003-2010 Nissan Murano, 2008-2016 Nissan Rogue, 2011-2016 Nissan Quest, 2003-2007 Infinity G35 Coupe, 2012 Infiniti FX35, 2013 Infiniti.
  • REPLACe PART NUMBER - The ballast replace NZMNS111LANA,NZMNS111LBNA, 28474-8991D, 28474-89904, 28474-89907, 28474-8991A, 28474-8991B. Compatible with g37 headlight ballast is a perfect solution.This ballast ....
Check Stock