ReviewsMegabold 0

Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (0.005/0.127-0.02/0.508 mm, 16 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 16 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.005/ 0.127 -0.02/ 0.508 mm, the numbers of size are etched into feeler gauge for easy identification, Warm notice: Please check the product specification and size before purchase..
  • Metric sizes (mm): 0.127 mm, 0.152 mm, 0.178 mm, 0.203 mm, 0.229 mm, 0.254 mm, 0.279 mm, 0.305 mm, 0.330 mm, 0.356 mm, 0.381 mm, 0.406 mm, 0.432 mm, 0.457 mm, 0.483 mm, 0.508 mm.
  • Inch sizes: 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020 inches.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don't worry about that.
Check Stock

Small Parts-44905 Plastic Shim Stock Flat Sheet Assortment 0.0005-0.030 Thickness 5 Width 20 Length Pack of 14

  • Assortment contains 1 of each thickness: 0.0005", 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.0075", 0.010", 0.0125", 0.015", 0.020", 0.025", and 0.030".
  • Color coded shim is made from a high quality plastic material.
  • 0.0005", 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.0075", 0.010", 0.0125", 0.015", 0.020", 0.025", 0.030".
  • Non-magnetic and non-conductive to electricity.
Check Stock

CAMWAY Bent Feeler Gauge 16 Blade Feeler Gauge Imperial/Metric 45º Blades Offset Stainless Steel Feeler Gauge Measuring Tools for Measuring Gap

  • 45º Blades Offset,The stainless steel feeler gauge is used to measure the gap size..
  • Metric sizes (mm): Includes metric sizes 0.508, 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483 mm.
  • Standard SAE(inch sizes): 0.020, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, and 0.019 inches.
  • Material:The Bent Feeler Gauge made of 65 manganese steel,high strength. Dimension(L x W x H)：103.7x13x26.5 (mm),Weight：66.1g.
  • Scale clear, easy to use,Metal fastening screws, durable,Please don't put on the humid environment.There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty..
Check Stock

260 Brass Sheet Unpolished Mill Finish Half Hard Temper 0.001-0.015 Thickness 6 Width 12 Length Pack of 12

  • Assortment of 6" wide by 12" long sheets contains 1 each of the following thicknesses: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", and 0.015".
  • Made from a half hard, cold rolled, 260 alloy brass.
  • 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015".
  • Used in applications where corrosion problems exist.
  • Excellent forming qualities and may be lightly drawn, blanked or stamped.
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Gap Measuring (0.05-1.00 mm, 20 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 20 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.002 inch/ 0.05 mm to 0.04 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.05 to 1 mm, various sizes bring convenience when measuring.
  • Inch sizes: 0.002, 0.004, 0.006, 0.008, 0.010, 0.012, 0.014, 0.016, 0.018, 0.020, 0.022, 0.024, 0.026, 0.028, 0.030, 0.032, 0.034, 0.036, 0.038, 0.040.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

uxcell 0.02 to 1mm Thickness Gap Metric Filler Feeler Gauge 6 Long

  • Total Size : 155 x 15 x 7mm / 6" x 0.6" x 0.28" (L*W*T).
  • Thickness (mm) : 0.02, 0.03, 0.04, 0.05,0.06, 0.07, 0.08, 0.09, 0.10,0.15, 0.20, 0.25, 0.30, 0.40, 0.5, 0.75, 1.00.
Check Stock

Precision Brand Carbon Steel 1008 Shim Stock Assortment Full Hard Temper AISI 1008/AISI 1010 ASTM A109 for Chemistry 0.001 0.0015 0.002 0.003 0.004 0.005 0.006 0.007 0.008 0.010 0.012 0.015 0.020 0.025 ,/0.031 Thick 6 Width 12 Length Pack of 15

  • 6" by 12" assortment contains 1 each of the following thicknesses: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", and 0.031".
  • Made from a full hard, cold rolled, low carbon 1008-1010 steel.
  • 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.010", 0.012", 0.015", 0.020", 0.025", and 0.031".
  • Used in applications where hardness, flatness and accuracy are required.
  • Material can be punched or sheared with minimum burring and distortion.
Check Stock

Commercial Trane Thermostat; PROGRAMABLE Touch Screen 3H/2C

  • Replaces / Supersedes:  BAYSTAT152A , THT2775 , THT02775 , THT-2775 , THT02552 , THT2552 , THT-2552 , THT02553 , THT-2553 , THT2553 , THT03120 , THT-3120 , THT3120 , BAYSTAT052AA , BAYSTAT053AA and others..
  • Commonly used with the following units: YHC072F3***0* , YHC072F4***0* , YHC072FW***0* , YHC074F3***0* , YHC074F4***0* , YHC092F3***0* , YHC092F4***0* , YHC092FW***0* , YHC102F3***0* , YHC102F4***0* , YHC102FW***0* , YHC120F3***0* , YHC120F4***0* , YHC120FW***0* , YSC033G3***0* , YSC033G4***0* , YSC033GW***0* , YSC036G3***0* , YSC036G4***0* , YSC036GW***0*.
  • BAYSTAT152A , THT2775 , THT02775 , THT-2775 , THT02552 , THT2552 , THT-2552 , THT02553 , THT-2553 , THT2553 , THT03120 , THT-3120 , THT3120 , BAYSTAT052AA , BAYSTAT053AA and others..
Check Stock

300 Pcs Compression Springs Assortment Kit, Stainless Steel Springs, Spring Assortment for Shop and Home Repairs, 30 Different Sizes with Individual Bags

  • 【30 Different Sizes, 300 Pieces Spring Assortment Kit】Our spring assortment kit includes 30 different sizes, each sizes has 10Pcs, and total 300pcs in box..
  • 【Premium Compression Spring】 Smooth and no stab, good fatigue strength, high ductility. Spring coils are both durable and flexible for the right amount of tension..
  • 【Each Sizes Spring Steel Come with Individual Package】Size :【A×B×C】A is Wire diameter, B is Outer diameter, C is Free length： 【0.011″x0.16″x0.39″】.
  • 【0.011″x0.16″x1.18″】； 【0.016″x0.20″x0.39″】.
  • 【0.016″x0.20″x1.19″】； 【0.020″x0.24″x0.39″】.
Check Stock

100 Pack Cork Stoppers Wine Bottle Cork Stoppers Wooden Tapered Cork Plugs Replacement Assorted Corks for Wine Beer Bottle Crafts, 10 Sizes

  • Product quantity: you can get 100 packs of tapered cork plugs of 10 different sizes (each size for 10 pieces), large in quantity and rich in size selections, easy to meet your diversified using needs, please refer to the pictures for more details.
  • 10 Sizes: there are 10 different sizes of wine corks available, 0.35 x 0.24 x 0.39 inch, 0.43 x 0.31 x 0.39 inch, 0.55 x 0.47 x 0.39 inch, 0.59 x 0.51 x 0.39 inch, 0.63 x 0.47 x 0.59 inch, 0.71 x 0.51 x 0.59 inch, 0.75 x 0.63 x 0.78 inch, 0.79 x 0.63 x 0.78 inch, 0.87 x 0.70 x 0.78 inch, 0.98 x 0.74 x 0.78 inch.
  • Conical design: these wine bottle stoppers feature conical design, reasonable and reliable, will not alter the taste of wine, suitable for the application of different sizes of bottle mouth such as grape wine bottle, beer bottle, glass can, wish bottle, tube bottle and so on.
  • Safe material: these conical replacement corks are made of quality cork, safe and reliable, without harmful substances to the body.
  • With good pliability, they can tightly seal the bottle, and you can use them at ease.
  • DIY process supplies: these cone shaped corks are very good manual DIY materials, which are very suitable for children and adults to do various creative DIY projects.
  • You can make them into handicrafts according to yo....
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Measuring (0.02-1.00 mm,Short 17 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 17 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0008 inch/ 0.02 mm to 0.0394 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.02, 0.03, 0.04,0.05,0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25 0.30, 0.40, 0.50, 0.75, 1.00.
  • Inch sizes: 0.0008-0.0394 inch, various sizes bring convenience when measuring.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock