ReviewsMetal Aircraft

1/8-Inch x 6-Inch Aircraft Extension Black Oxide Drill Bit, Premium M2 High Speed Steel, Extra Length, for Metal, Plastic, Wood

  • AIRCRAFT EXTENSION: 1/8-inch cutting diameter, 1-5/8-inch flute length, 6-Inch overall length, 135 degree split point, straight shank.
  • MADE FROM PREMIUM M2 HIGH-SPEED STEEL: perform better because of its well-balanced toughness.
  • BLACK OXIDE: Black oxide coating resists corrosion.
  • APPLICATION: are ideal for extra reach and deep drilling applications in medium and softer materials, soft metal, PVC and wood.
  • INCLUDE: 6 pieces of 1/8-inch aircraft extension drill bits with case.
Check Stock

diymore 6Sets MG996R 55g Digital Metal Gear Servo Motor + MG995 MG996R Metal Servo Arm 25T Disc Metal Horns for Robot Arm RC Helicopter Airplane Car Boat Robot

  • 【Package】Package included 6 sets MG996R metal gear servo motor+25T Disc metal horns..
  • 【Updated version】MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed of MG996r is faster, the accuracy is much improved and the tension is increased..
  • 【Quality】180°rotation high torque,Stable and shock proof and also of high speed.Can compatible with most standard receiver connector: Futaba, Hitec, Sanwa, GWS, etc..
  • 【Parameter】Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
  • Operating Speed : 0.17sec / 60 degrees (4.8V no load).
  • Operating Speed : 0.13sec / 60 degrees (6.0V no load)..
  • 【Application】Biped robot/manipulator/remote control car, suitable for 50-90 grade methanol fixed-wing~aircraft and 26cc-50cc gasoline fixed-wing aircraft and other models..
Check Stock

Busyflies F/A-18 Hornet Strike Fighter Attack Fighter Plane Model Diecast Military Airplane Model for Collection and Gift

  • The F/A-18 combat attack aircraft (nickname: Hornet, also known as: Hornet Strike Fighter, commonly known as: Boeing F-18 "Hornet", official number: F/A-18), is a supersonic jet of the United States Navy The third-generation fighter..
  • The fuselage of the airplane model is made of high-quality metal, and the base and some parts are made of plastic..
  • The model is strictly restored according to the original aircraft proportions and details.It is very suitable to decorate your desk,showcase and shelf..
  • The idea present for your lover ,aviation enthusiast, military collectior..
Check Stock

2/Pack Solid Carbide Drill Bit for Hardened Steel Hard Ness HRa 91.3 Aerospace Standard K20 Tungsten Carbide Jobber Length Twist Drill for Metal 118 Degree Four Facet Point Fractional Size (3/32')

  • ...solid carbide drill bits provide better rigidity than high speed steel bits. It is extremely heat resistant and used for high speed applications. Our tungsten carbide (WC) bits has the advantage of cutting metal either "wet" or "dry" and they provide solutions for many businesses such as aerospace drilling jobs for aircraft mechanics, precision machining, hobby supply, etc..
  • ★【Recommended For Use On】 aircraft metals chrome titanium inconel stainless steel Alloys Steel Low-Medium-High Carbon Steel Aluminum Copper Glass Plastics Composite Materials Cast Iron -- Our Carbide drills stay sharp many times longer than traditional steel bits making them ideal for the toughest of applications!.
  • ★【Optimal Design for Metal Work】 118° four facet point angle minimizes drill wander and assures accurately sized holes. Our jobber length, precision ground carbide drills are designed for high feed rates with good chip disposal. smooth finish on the bits increases chip flow. Spiral flutes are constructed with a higher flute angle to remove chips more easily..
  • ★【Specs】 Tungsten Carbide Grade (ISO): K20 / Binder: %8 Cobalt / Hardness: 91.3 HRa / Uncoated / Flute Length: 1 inch, Overall Length: 2 inch, Drill Size: 3/32 inch.
Check Stock

2/Pack Solid Carbide Drill Bit for Hardened Steel Hard Ness HRa 91.3 Aerospace Standard K20 Tungsten Carbide Jobber Length Twist Drill for Metal 118 Degree Four Facet Point Fractional Size (5/32″)

  • ...rbide drill bits provide better rigidity than high speed steel bits. It is extremely heat resistant and used for high speed applications. Our tungsten carbide (WC) bits has the advantage of cutting metal either “wet” or “dry” and they provide solutions for many businesses such as aerospace drilling jobs for aircraft mechanics, precision machining, hobby supply, etc..
  • ★【Recommended For Use On】 aircraft metals chrome titanium inconel stainless steel Alloys Steel Low-Medium-High Carbon Steel Aluminum Copper Glass Plastics Composite Materials Cast Iron — Our Carbide drills stay sharp many times longer than traditional steel bits making them ideal for the toughest of applications!.
  • ★【Optimal Design for Metal Work】 118° four facet point angle minimizes drill wander and assures accurately sized holes. Our jobber length, precision ground carbide drills are designed for high feed rates with good chip disposal. smooth finish on the bits increases chip flow. Spiral flutes are constructed with a higher flute angle to remove chips more easily..
  • ★【Specs】 Flute Length: 1-3/8 inch, Overall Length: 2-1/2 inch, Drill Size: 5/32 inch // Tungsten Carbide Grade (ISO): K20 // Binder: %8 Cobalt // Hardness: 91.3 HRa // Uncoated.
Check Stock

2/Pack Solid Carbide Drill Bit for Hardened Steel Hard Ness HRa 91.3 Aerospace Standard K20 Tungsten Carbide Jobber Length Twist Drill for Metal 118 Degree Four Facet Point Fractional Size (3/16")

  • ...bits provide better rigidity than high speed steel bits. It is extremely heat resistant and used for high speed applications. Our tungsten carbide (WC) bits has the advantage of cutting metal either "wet" or "dry" and they provide solutions for many businesses such as aerospace drilling jobs for aircraft mechanics, precision machining, hobby supply, etc..
  • ★【Recommended For Use On】 aircraft metals chrome titanium inconel stainless steel Alloys Steel Low-Medium-High Carbon Steel Aluminum Copper Glass Plastics Composite Materials Cast Iron -- Our Carbide drills stay sharp many times longer than traditional steel bits making them ideal for the toughest of applications!.
  • ★【Optimal Design for Metal Work】 118° four facet point angle minimizes drill wander and assures accurately sized holes. Our jobber length, precision ground carbide drills are designed for high feed rates with good chip disposal. smooth finish on the bits increases chip flow. Spiral flutes are constructed with a higher flute angle to remove chips more easily..
  • ★【Specs】 Flute Length: 1-5/8 inch, Overall Length: 2-3/4 inch, Dr....
Check Stock

Staedtler pigment liner fineliner technical drawing pen black ink 0.7mm

  • Cap off: can be left uncapped for 18 hours without drying up - With metal clip.
  • Long metal tip, ideal for rulers & templates - PP barrel guarantees long service life.
  • Fineliner for writing, sketching & technical drawing - Lightfast indelible pigment waterproof black colour ink.
  • Airplane-safe: automatic pressure equalisation prevents pen leakage while on board aircraft.
  • Erasable when used on drawing film, no bleeding when highlighted.
Check Stock

33 PCs Aircraft Carrier Playset 16 Inch Aircraft Carrier Toy with Die-cast Military Vehicles Jets Soldier Men and Accessories Battleship Toys for Boys

  • Super Value Aircraft Carrier Playset: This 33 PCs Aircraft Carrier Pack includes: a Aircraft Carrier Toy, 6 Different Style Die-cast Military....
  • Creat Parking Lots: This 16 Inch Large Aircraft Carrier can be opened up and turned into a Parking Lot. Kids can load their favorite Military Vehicle....
  • Realistic Effects: The Aircraft Carrier is equipped with a Launchable Gun that simply needs to be placed into the barrel and then pressed the launch....
  • Ideal Gifts: The best set of Aircraft Carrier with different Military Vehicles for kids ages 3 and up! Perfect for Gifting Occasions. Suitable for....
  • Learning & Fun: These aircraft carrier toys are great fun and very easy to assemble. Your children can play the role of Aircraft Carrier Captain to....
Check Stock

HSDJETS 90mm EDF Semimetallic Electric Ducted Fan 6S 1550KV 3.7KG Thrust for Rc Airplane

  • The front half rectifier main cylinder is made of aluminum alloy,which has high strength and is not easy to deform,so as to avoid the blade scratching the inner wall of the main cylinder.It can de changed later to upgrade the rectifier port with larger horn diameter to meet the needs of FRP model aircraft products..
  • Another advantage of using the separated blade is that it is highly accurate,free and symmetrical assembly,convenient and flexible for dynamic balance test of the blade,fast pairing,and high test passing efficiency..
  • There is only 0.6mm gap between the blade and the main cylinder inside wall, so S-EDF has high efficiency.The blade adopts the imported carbon fiber mixed raw material developed by special technology,which is high strength and high toughness,not easy to deform,not easy to break under the pressure of certain strength,and the sound is clear and pure when rotating at high speed..
  • The second half of the main cylinder is made of mixed materials with special technology,which has high hardness and certain toughness.It is fixed with the metal motor,which can eliminate resonance to a certain extent and avoid adverse effects on the normal flight of the moder aircraft..
Check Stock

KETEP 2019 Upgrade Flying Toys Drones for Kids, Mini Drone Helicopter, Infrared Sensor Auto with 360° Rotating Hand Controlled Drone Toys for Boys or Girls

  • Quick start: Press the power swith two seconds, the top LED light is flickering to indicate the aircraft is ready to start working.
  • Power off: Press the power swith two seconds, when the light goes out after loosening the botton, the aircraft is shut down successfully.
  • Operation method after power supply start-up,hold the front of the aircraft lightly, stretch your arms up and release the machine to start flying automatically, hold the aircraft horizontally, and gently throw it out to star flying.
  • To raise the height of the flying machine, put your hand or other object at the botton of the aircraft and push upward, the aircraft induce this action and automatically ascending, players can adjust the rising height to different levels of their needs.
  • In-flight stop, grasp the aircraft quickly with your hands, turn the aircraft upside-down, the propeller will stop running.
  • touching the aircraftslightly with your hand will stop the operation and fall.
  • When the four LED lights at the botton appear slow flashing or the aircraft is unable to take off, please recharge the battery before using it.
Check Stock

Wind Spinner Personalized Metal Windmill Wind Energy Wind Sculpture Airplane Wind Spinner Wrought Iron Windmill for Yard Garden Patio Sculpture Wind Spinner (Red(39''))

  • Our magical metal windmill is light and compact. When it is fixed on the metal pile, it moves with the wind like flying, bringing better viewing to your garden.Creative Metal Iron Aircraft Modeling Windmill, Airplane Wind Sculpture, for Home Garden Yard Outdoor Decoration.
Check Stock