ReviewsMetal Beer Tap

Kegco K199B-2 Keg Dispenser

  • ...ing you need to begin dispensing delicious draft beer straight from a keg. The two tap dispense system includes a brand new 5 lb. aluminum CO2 tank, a single gauge CO2 regulator with air distributor, two D system lever handle keg couplers that can tap all domestic kegs, a 3″ diameter dual faucet chrome plated metal draft tower, and two chrome beer faucets with brass levers. The CO2 tank ships empty..
  • LARGE INTERIOR: This keg cooler has a spacious interior that can accommodate one full size, straight pony, or quarter slim keg, and up to two sixth slim, strap handle, or rubber home-brew kegs (it will not hold bevel or rubber kegs, commonly used by Miller and Coors). If you need additional cold storage when not dispensing kegs, two removable wire shelves are included to allow you to easily convert this keg refrigerator into an all-refrigerator or beverage center..
  • SLEEK AND STYLISH DESIGN: Your kegs are housed in a sleek black cabinet with a decorative black door, which is sure to look great in any room of your home. This unit also features a textured serving countertop with an attractive metal safety rail that keeps your glasses and beer mugs from sliding off, as well as an easy-to-clean removable drip tray that collects spills to make clean-up a....
Check Stock

Black Tap Lock for Perlick 630 and Perlick 650 Draft Beer Faucets

  • Protect your draft beer with our new Perlick 600 series heavy-duty aluminum tap lock. Simply slide this black tap lock onto a Perlick 630ss or 650ss....
  • This is a much better design than Perlick’s 308-40C wrap-around tap lock that is also used on the Perlick 630 faucet. This beer faucet lock is more....
  • VERY IMPORTANT: Look at the faucet lock guide chart in the pictures section to make sure your beer faucet is a Perlick 600 series and not a Perlick....
  • Note: This tap lock will not fit the following draft beer faucets: Intertap, MicroMatic, Perlick 500 series, Stout (Guinness-style) or European-style.....
  • All locks are keyed alike. Each lock comes with 1 key. Additional keys are available on Amazon. Search ‘Standard Tap Lock Keys.'.
Check Stock

Starrett T-Handle Tap Wrench, 93A - 1/16' to 3/16' for Holding Taps, Drills, Reamers, Small Tools with Long 2” Center Body, Rigid Hold, Sliding Removable Handle, 1/16' to 5/32' Square Shank Diameter

  • MAKE BEER POURING FUN - With customizable beer tap handles! Write an authentic message to the tap handles to cheer up your colleagues or friends. The mix of classic walnut wood and black chalkboard gives an authentic look to the tap handles - the style fits both home kegerators and fancy restaurants..
  • GREAT FOR HOMEBREWERS OR BARS - Our 2-pack tap handles for kegerator fits standard 3/8 '' - 16 UNC threads which fit standard taps in the USA. Chalkboard tap handle size is: 8" x 2" x 1". Package includes 2-pack of walnut wood beer tap handles and a white chalkboard pen..
  • AWESOME GIFT WITH CUSTOM MESSAGE - Silginnes keg tap handles are a perfect gift for beer lovers, homebrewers, or restaurant owners. Tip: Write a funny message to the chalkboard of the beer tapper handles to cheer up the gift receiver - we promise that it will be appreciated!.
  • PREMIUM QUALITY & STURDY WALNUT WOOD - Durable protected walnut wood is a great material for keg pull handles as it lasts for years of heavy use. Write smoothly and erase cleanly to the chalkboard surface with the pen. If you want to use different colors than white, you can also use any other chalk pen..
  • WE PROVIDE A FULL WARRANTY - We monitor carefully the manufacturing process of Silginnes beer chalkboard signs, but....
Check Stock

Pressurized Beer Mini Keg System - 64oz Stainless Steel Growler Tap, Portable Mini Keg Dispenser Kegerator Kit, Co2 Pressure Regulator Keeps Carbonation for Craft Beer, Draft and Homebrew - NutriChef

  • 64OZ VOLUME CAPACITY: Includes metal screw on lid for easy portable transportation and storage. Its 13.4" height fits in your home fridge or kegerator. The barrel is the same volume as traditional growlers and is laser marked at the fill level.
  • KEEPS YOUR BEER FRESH: A traditional growler will let carbonated beer go flat after the first pour but not this mini growler, as it will keep beer vacuum pressured and fresh for up to 2 months. Perfect for any homebrew or craft draught beer.
  • STAINLESS STEEL MATERIAL: Each of the accessories in the tap dispenser kit is constructed with S/S 304 stainless steel. Tap faucet handle is just pouring draft brew from a kegerator. Pressure release valve allows safe removal of the tap hardware.
  • WORKS W/ DISPOSABLE CO2: Each cartridge will pump around 128oz of beer before depleting Co2 cartridges not included. Screw universal threaded 16g CO2 gas cartridges (any brand) into the regulator to supply pressurized carbonation to your keg system.
  • UPGRADED REGULATOR: Monitor the mini keg growler's current PSI from the regulator gauge and fine tune pressure by rotating the adjustment knob to enjoy a perfect head on every beer. Add the insulator sleeve to keep beer coolerDescriptionNutriChef Model : PKBRTP50.5Homebrew Mini Keg - Stain....
Check Stock

Kakaako Brewing Co - 64 oz Pressurized Growler and Dispenser Tapping System with CO2 Regulator and Faucet with Tap for Fresh Craft Beer, Homebrew, Coffee, Vacuum Insulated (w/Standard Faucet)

  • ⭐️KEEPS BEER FRESH & COLD LONGER: The stainless steel double wall vacuum insulated design of the growler keeps your beer icy cold all day. Using the dispenser tap system to pressurize with CO2 keeps your draft beer fresh and carbonated for weeks. Store in refrigerator to keep cold and ready for use.
  • ⭐️ENJOY POURING BEER WITH TAP HANDLE: Enjoy feel good feeling you get while at a brewery watching your favorite beer get poured on tap. The co2 regulator allows you to adjust the pressure inside the growler so when you open the tap handle you get the perfect pour with just the right amount of head.
  • ⭐️PERFECT FOR CAMPING, PARTIES, AND GET TOGETHERS: Enjoy fresh craft beer anywhere. Fill the growler with fresh beer at your favorite brewery or with homebrew. Impress and treat your friends to draft beer without the hassle of a keg.
  • ⭐️GREAT FOR HOMEBREWS: Rack your fermented homebrew beer into the growler like you would a keg and natural carbonate or force carbonate with the dispenser tapping system co2 regulator (0-30 PSI).
  • ⭐️WHAT’S INCLUDED: 1x 64oz growler with cap, 1x tapping system coupler, 1x beer faucet with handle, 1x co2 regulator for 3/8″ cartridges (co2 cartridges not included), and 1x how to use guide.
Check Stock

Dual Beer Tower Dispenser – Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench

  • DOUBLE YOUR POURING POWER: Limiting yourself and your guests to pouring one beer on tap at your in-home bar is time consuming and frustrating.
  • The G. Francis Double Tap Draft Beer Tower is a beer faucets accessory that will double your pouring power and give your bar the finished feel you have been longing for.
  • USE YOUR EQUIPMENT: Inside lined with foam sheet for cooled tower systems insulation.
  • Tower stands 13.25 inches (33.7cm) tall (not including 3.1-inch/7.9cm tall tap handles) and has a 3-inch (7.6cm) diameter and 4.5-inch (11.4cm) base diameter.
  • 2.75-inch (7cm) center-to-center mounting hole distance (fits standard 3-inch/7.6cm hole pattern).
  • Includes 2 separate 5-foot (1.5m) lengths of 3/16-inch (4mm) inside diameter (ID) (7/16-inch / 11mm OD) clear beer tubing with a 4.5-foot (1.4m) reach.
  • BUILT TO LAST: Constructed from polished silver stainless steel hardware and components, hard plastic faucet knob tap handles, and soft rubber faucet cap sanitary covers for maximum strength and longevity that resists rust and corrosion while preventing scratches and other damage.
  • Transparent hose is FDA approved 21CFR 175.300 PVC.
  • KEEP OUT CONTAMINANTS: Black faucet cap sanitary covers are the most simple and effective way to keep the faucets clean and are....
Check Stock

Tower Kegerator Conversion Kits Mini Refrigerator Conversion Kit Include Adjustable Beer Faucet Beer Regulator Beer Gas Line D Keg Coupler for Draft Beer Dispensing Equipment by PERA

  • The Sankey Keg Coupler is made of chrome-plasted brass body and stainless steel proble, can retain the beer flavor after long-term use. The beer keg coupler can fit all American D Type Keg, Perfect for dispensing beer, wine, soda and other carbonated drinks..
  • The Tap Tower Kegerator Conversion Kits includes most Convert kits you need to easily conert a refrigerator or freezer into your very own draft beer dispenser. Include Beer Tap, Beer gas regulator, beer gas line, D keg Tap, beer wrench etc..
  • This DIY Kegerator Conversion kit comes with almost everything you need to serve your favorite beverages, just connect the kegs and CO2 tank..
  • It is save your money and space by building your draft beer dispenser system using your refrigerator and PERA kegerator conversion kits..
  • Quality Guarantee, Any Problem for the kegerator conversion kit , Please contact us, Money Back or Replacement Guarantee..
Check Stock

Hgkeke 128oz Mini Keg Growler Portable Growler Tap System Stainless Steel Pressurized Growler 60PSI CO2 Regulator Mini Self-close Stainless Steel Core Faucet CO2 Pressure Growler Tap for Home Brewing

  • Long-lasting & Durable Mini Keg Growler: 304 stainless steel mini keg growler with sturdy structure, premium material make sure pure beer taste avoid....
  • Ten bottles in one & 128OZ Big Capacity: 128OZ big capacity beer growler tap system, double size of the 64 ounces beer growler tap system,....
  • Accurate & Leakage-free 0-60 PSI Regulator: 0-60psi keg regulator, double-stage construction control gas input steadily. Delicate pressure gauge, psi....
  • No Sticky & Spring-loaded Faucet: beer dispenser owns a spring-loaded faucet to hold the handle to the closed position tightly, no beer leaks when you....
  • Perfect Keg Growler Tap System Kit: Hgkeke 128oz mini keg growler tap system is great for beer brewing lovers. What you will get: 1 * 128 OZ keg,....
Check Stock

Kegco Basic Kegerator Draft Beer Conversion Kit - BCK-NT

  • ...xible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out. Included is 1 plastic snap clamp with a reusable design and a coupling assembly of 1 stepless clamp, 1 3/16″ hose nipple/tail piece, and hex nut coupling nut..
  • INCLUDES METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length..
Check Stock

Silginnes Chalkboard Beer Tap Handles - 4-Pack Wooden Walnut Beer Tap Handles With Chalkboard And Pen - Best For Homebrew, Kegerators And Bars - Makes A Great Gift For Beer Lovers And Homebrewers

  • MAKE BEER POURING FUN - With customizable beer tap handles! Write an authentic message to the tap handles to cheer up your colleagues or friends. The mix of classic walnut wood and black chalkboard gives an authentic look to the tap handles - the style fits both home kegerators and fancy restaurants..
  • GREAT FOR HOMEBREWERS OR BARS - Our 4-pack tap handles for kegerator fits standard 3/8 '' - 16 UNC threads which fit standard taps in the USA. Chalkboard tap handle size is: 8" x 2" x 1". Package includes 4-pack of walnut wood beer tap handles and a white chalkboard pen..
  • AWESOME GIFT WITH CUSTOM MESSAGE - Silginnes keg tap handles are a perfect gift for beer lovers, homebrewers, or restaurant owners. Tip: Write a funny message to the chalkboard of the beer tapper handles to cheer up the gift receiver - we promise that it will be appreciated!.
  • PREMIUM QUALITY & STURDY WALNUT WOOD - Durable protected walnut wood is a great material for keg pull handles as it lasts for years of heavy use. Write smoothly and erase cleanly to the chalkboard surface with the pen. If you want to use different colors than white, you can also use any other chalk pen..
  • PREMIUM QUALITY & STURDY WALNUT WOOD - Durable protected walnut wood is a great material for keg pull handles as it....
Check Stock

Beer Tap Cover Draft Faucet Keg Caps Rubber Tap Soother Sanitary Cover 10 Pcs

  • Include 10 pcs tap soother. The bar tap cover fits standard bar taps perfectly. Perfect for regular beer draft faucets..
  • These rubber dust caps slip on and prevent anything from getting into the faucet and into your beer glass when you draw a fresh cold one. Completely covers tap spout keeping them clean and bug free. No more annoying come buzzing about. Must have for your Kegerator..
  • Good way to keep your tap sealed when you’re not dispensing beer or after you clean the lines and you’re waiting to install your next keg. Keep your beer taps clean especially when you’re not using one of them or if your kegerator is outdoors..
  • Use these for everything – faucet stopper, but also dust covers for the connections on ball lock kegs and 1/2″ hose connections in your brewery (mash tun, kettle, hot and cold side of plate chiller, pumps). If this cover fits over it. it becomes a dust cover for it..
  • Satisfaction guarantee. We would provide full refund if our draft beer faucet cap doesn’t meet your needs. If you are the one who think more of the product quality, then our faucet covers are perfect for you..
Check Stock