ReviewsMetal Bonded Diamond

OKDIAMOND Diamond Cutting Wheel 6 x 7/8 Inch for Metal, Cut Off Wheel with 3000+ Cuts on Rebar, Steel, Iron and INOX, for Angle Grinder-6 inch

  • All in 1 Metal Solution - 4.5 diamond blades for grinder for metal diamond plate cutting wheel，Angle grinder cutting wheel ，Our cut off wheel allows dry cutting of many metal type materials likes tubes&structural、sheet metal、stainless steel、solids、rebar、castings、steel plates、non-ferrous..
  • LONG LIFE - Metal cutting blade according to the test results, OKDIAMOND enables to make more than 3000 cuts. Increased lifetime of this cut off wheel is ensured by high-temperature plasma soldering and a new generation of diamond grit in the segment. And our cut wheels have no wear and tear after work , it does not wear down like bonded abrasives.
  • Environmental - When you use our cutting wheel : less sparks, no dust, no smell, no overheating. reducing dust particles for a cleaner work station. It's very comfortable in usage than traditional wheels. It's 100% contaminant-free. The diamond cutting wheel can be used for grinding burred edges that can leave after rough metal cutting..
  • SAFETY- Wheel breakage eliminated when operating at high rotation speed (13200 RPM) because of special construction of the disc ....
Check Stock

Diamond Machining Technology (DMT) 4\ Diamond Whetstone Bench Stone, Extra-Extra Fine Grit Sharpener (W4EE)

  • Crafted from the highest quality materials.
  • Leather sheath provides each access and portability.
  • Extra Fine diamond for the finest polished edge of al bonded diamond abrasives.
  • Sharpens knives faster than conventional stones with DMT's monocrystalline diamond surface.
  • No oil is needed-sharpen dry or with water.
  • Durable construction will provide years of consistent performance and reliable service.
Check Stock

Husqvarna Construction Products 542761409 4.5 Inches by 080 by 7/8 20mm 5/8 B TSD S Dri Disc Diamond Blade

  • 4.5 x .080 x 7/8-20mm-5/8B Segmented TSD-S Drill Disc.
  • Affordable, fast cutting concrete, masonry, brick and stone.
  • Premium diamond blade for dry or wet cutting.
  • Total segment height is .275 inches diamond depth.
Check Stock

10pcs Diamond Knife Sharpening Stones sets with aluminum blank diamond plates Kit for RUIXIN PRO RX008 Knife sharpener

  • 1)These diamond sharpening stones are made of "Sytools" ,Including 10pcs Grit 80# 200# 400# 500# 600# 800# 1000# 1500# 2000# 3000#.
  • 2) Better quality than Chinese diamond Sharpening stones which currently on the market,Electroplated diamond particles are more uniform,smoother surface..
  • 3)The first to use the aluminum blank as the support base, the sharpening stone is not bent, the grinding angle is more accurate, and the aluminum blank can be reused (only need to remove the worn diamond pieces), and then use double-sided tape to paste your own sharpening stone.
  • 4)Awesome better than the wet stones,replace the wet stones in the ruixin pro rx-008 kitchen knife sharpener system, Apex sharpener , no need to modify..
  • 5)The plates are bonded to the plastic holders with Double-sided tape (more stable than adhesive, not easy to fall off), the diamond particles are bonded to the plates with electro-plating.
Check Stock

Dewalt 3IN Diamond Multi Material (DW8530)

  • BUILT FOR LONG LIFE: High-endurance construction designed to perform 1,000+ cuts*.
  • CUT THROUGH A RANGE OF MATERIALS including drywall, plastic, metal, fiber cement, and fiberglass.
  • PROFESSIONAL-GRADE DURABILITY: Diamond technology is engineered for cutting and requires fewer wheel changes compared to bonded cut-off wheels.
  • HIGH PRECISION AND REACH: Maintains consistent cutting depth for the life of the blade.
Check Stock

ATLIN Grinding Wheel Dressing Tool - 36 Grit & 120 Grit Diamond Dresser - True Up and Restore Grinding Wheels

  • ...g wheels. The result is less heat buildup, faster grinding, and a superior finish on your work pieces.
  • A Wheel Dresser That Lasts – Forget about constantly replacing carbon steel dressers. The dressing stone of the ATLIN grinding dresser is made up of an industrial-grade diamond matrix bonded onto a solid block of steel. Have no doubt that diamond will far outlast carbon steel alternatives.
  • True Your Wheels – This grinding wheel truing tool makes resurfacing a wheel easy due to its long surfacing head. In seconds you can true up a wobbling wheel, remove grooves, fix out of round wheels, and square up skewed wheels.
  • Restore Your Wheels – This grinder dressing tool will breathe life into even your most worn out abrasive wheels. The diamond dresser cuts the abrasive material to expose a sharp, open, clean abrasive face capable of grinding metal just like new.
  • Size, Specs, Contents – Includes 36 grit and 120 grit dressing tools. Diamond head has an abrasive surface area of 1.77” x 0.59”, Overall tool length is 4.5”, Knurled handle length is 4.0”.
Check Stock

Vearter 125mm Diamond Cutting Disc Wheel 5 x 7/8Inch for Stainless Steel, Cast Iron, Aluminum, Brass, Metal Cutting, can Cut More Than 4000 Times

  • Vacuum Brazed Technology, the industrial premium diamond grains are permanently brazed to the edge of steel core creating an unbreakable and extremely heat resistant segments.
  • Vearter diamond cutting disc delivers 4,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels..
  • Quality guarantees precise cutting performance, accuracy, longevity, stability and integrity..
  • The robust steel wheel body greatly reduces the risk of breakage and injury and increases safety.
  • Vearter saw blades can maintain their original wheel diameter during use for better control and precise cutting..
Check Stock

Diamond Machining Technology (DMT) Dia-Flat Diamond Lapping Plate, 4 by 10 Inch

  • Whetstone Knife Sharpener Set: Designed to fit easily into any pocket, these lightweight diamond sharpening stones come color-coded for easy identification.
  • 4 Diamond Grits: Extra-coarse diamond (60 micron / 220), coarse diamond stone (45 micron / 325 mesh), Fine diamond (25 micron / 600 mesh) and extra-fine diamond (9 micron / 1200 mesh).
  • Portable: Each diamond sharpening stone is conveniently sized at 2.75 x 1 x .25 inches, meaning you can easily do your sharpening anywhere.
  • Fast & Easy: Micronized monocrystalline diamonds are securely bonded.
  • the dots keep the diamond stone surface clean for fast and efficient honing.
  • Sharpen dry or with water – no oil needed.
  • Made In The USA: Preferred by professionals for its superior quality and versatility, our knife sharpening kit with stones is built to provide years of consistent performance and reliable service.
Check Stock

Diamond Machining Technology DMT W7EFC Diamond Whetstone Mini Diamond Stone - Coarse / Fine / Extra-Fine - Set of 3

  • Diamond Wet Stone Sharpening Kit: Designed to fit easily into any pocket, these lightweight diamond stones come color-coded for easy identification.
  • 3 Diamonds: Coarse diamond stone (45 micron / 325 mesh) restores neglected edges.
  • Fine diamond stone (25 micron / 600 mesh) hones edges.
  • Portable: Each diamond stone sharpener is conveniently sized at 2.75 x 1 x .25 inches, meaning you can do your sharpening anywhere.
  • Fast & Easy: Micronized monocrystalline diamonds are securely bonded.
  • the dots keep the diamond surface clean for fast and efficient honing of all....
  • Made In The USA: Preferred by professionals for their superior quality and versatility, our durable diamond sharpening stones are built to provide....
Check Stock

Diamond Machining Technology (DMT) FWEEE Diafold 2-Sided Portable Diamond Sharpening Stone, Extra Fine/Extra Extra Fine

  • Portable, lightweight with convenient fold & go handles which enclose and protect the diamond whetstone when not in use.
  • Two sided sharpener with extra fine diamond (3 micron/8000 mesh) to provide the finest polished edge of all bonded diamond abrasives and extra-fine diamond to polish and refine an edge.
  • Sharpens knives and tools faster than conventional stones with DMT's monocrystalline diamond surface.
  • No oil is needed-sharpen dry or with water.
  • Durable construction will provide years of consistent performance and reliable service.
Check Stock

Diamond Machining Technology DMT Set of 3 6-in Diamond Whetstone Sharpeners in Hard Wood Box W6EFC

  • Diamond Wet Stone Sharpening Box: A Beautiful Hardwood Box Featuring 6" Diamond Whetstone Sharpeners.
  • 3 Different Grits: Coarse Diamond Stone (45 Micron / 325 Mesh) Restores Neglected Edges.
  • Fine Diamond Stone (25 Micron / 600 Mesh) Hones Edges.
  • Wood Box Of 3: Sharpeners Come In A Beautiful Hardwood Box That Can Be Used As Storage When Not In Use.
  • Fast & Easy: Micronized Monocrystalline Diamonds Are Securely Bonded.
  • The Dots Keep The Diamond Surface Clean For Fast And Efficient Honing Of All....
Check Stock