ReviewsMetal Carbon Printing

YOUSU Carbon Fiber PLA Filament 1.75 mm for 3D Printer & 3D Pen 1 kg (2.2 lbs) Black

  • [Premium PLA Filament] Carbon fiber filament Compared with PLA, stronger toughness, higher strength and rigidity, brittle feel, low shrinkage, high fluidity, suitable for printing industrial products.
  • [Problem Free & Easy to Print ] Yousu Carbon fiber PLA filament has better dimensional stability for warp free printing, excellent layer adhesion,clog-free, bubble-free and easy-to-use, and easy support removal..
  • [ Cost-effective and Wide Compatibility ]Our Yousu Filament is Compatiable for Most FDM 3D Printers in the market,Such as Creality Ender,Ender 3,Anycubic,Flashforge, Makerbot,Aquila,Etc..
  • [Vacuumed Sealed Package] The Filament Net Weight: 1KG. Yousu PLA filament comes in a sealed vacuum bag with a desiccant bag, keep your 3d printer filament in a good condition to be printed. NOTE:Please pass the filament through the fixed hole to avoid tangles after use..
  • [Recommended printing conditions]: 195°C-220°C (depending on the printer model), Printing speed: 50-100mm/s. Hot bed temperature: 50 – 60°C.
Check Stock

5 Pcs Transfer Paper Repeatedly Use Carbon Water-Soluble Tracing Paper 11'×9',Transfer Pattern on Cloth,Fabric,Canvas,Paper for Home Sewing Cross-Stitch Paint

  • The size is 11"×9",and it can be cut to the desired size..
  • Not easy to rip or crinkle,reusable and water-soluble,it would be disappear in the water..
  • Works great to transfer patterns,the copied pattern is clearly and the lines are complete..
  • Suitable for transfer printing patterns of cloth, paper, wood, leather, ceramic, metal,embroidery,etc..
  • Place the cloth on the table(must be a hard and flat table top),and then place the carbon paper(the color side must be facing the cloth),put the transfer pattern paper,and can start to trace the pattern.(In the tracing process, the fabric,carbon paper,and drawings cannot be moved.).
Check Stock

HERBEN Carbon Fiber Printing Plastic Made Front Grille Decoration Frame Trim V Cover for Alfa Romeo Stelvio 2017 2018 2019 2020 (NOT Applicable for Giulia Quadrifoglio)

  • Please note this grille trim cover is ONLY fit for Alfa Romeo Stelvio 2017 2018 2019 2020 (NOT applicable for Giulia Quadrifoglio).
  • It’s made of ABS plastic material, with carbon fiber printing. Please note this is not a real carbon fiber material made. ABS plastic is a durable material at affordable pricing. The carbon fiber printing looks similar to the real carbon fiber. We also have real carbon fiber material version for your option, please select at your preference..
  • Package includes the V part shown in the main image. It’s custom designed for the Alfa Romeo Stelvio front grille decoration..
  • Easy installation. No modification required. We already prepared the double sided adhesive tapes inside the part, you just peel off the tape film and stick it right on the V front grille, press with several seconds, and leave it dry for 48 hours, it will firmly stay with your Alfa Romeo Stelvio.
  • Before installation, please clean the place to be dust-free, it’ll be great help when sticking the part on your car. If any questions, please feel free to contact us. We will response at soonest time..
Check Stock

YXPOLYER Carbon Fiber abs ,Carbon Fiber abs Filament 1.75， abs Carbon Fiber Filament,abs Filament,Engineering 3D Printer Filament,1kg Spool,Black

  • ★【ABS-CF10 3D printer Filament】YXPOLYER ABS-CF10 is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. Also it is commonly used for printing functional prototypes and production parts. Support Material: AquaSol-120, Alkali soluble filament..
  • ★【Features & applications】 Carbon fiber reinforced ABS，High modulus，Excellent chemical and thermal resistance（The temperature resistance exceeds ABS 15℃）， Strong layer bonding，ease of printing.Suitable for machinery, automobile and other fields, such as elevators, hand tools and calibration fixtures on assembly lines, etc..
  • 【Printing conditions】We recommend print the filament at a Printing temperature of 220℃-260℃, bed temperature of 80-100°C..
  • ★【1.75mm engineering Filament Diameter】Dimensional Accuracy +/- 0.04mm. YXPOLYER filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ★【Triple waterproof protective packaging】Our packaging is vacuum sealed with semi-aluminum foil bags with desiccant,which can better isolate air and water molecules.Vacuum b....
Check Stock

Aootf Carbon Fiber License Plate Frame- Heavy Duty Black Aluminum Car Tag Cover, Slim Front & Rear Holders Mount Hardware Kit- Stainless Steel Screws Bolts, Nut, Tire Valve Caps, Rattle Proof Pad

  • Carbon Pattern License Plate Holder- Aluminum car license frame, carbon pattern printed on the surface (NOT REAL CARBON FIBER LICENSE PLATE FRAME). 1.6mm Thick aluminum, Heavy Duty, corrosion-resistant, rust-resistant and weather-resistant, protect the License Plate Rust Proof. 3D Twill weave pattern carbon printing, clear, UV resistant, will not fade, more cost-effective than real carbon holder. Cool car tag frame is suitable for BMW, Mercedes-Benz, Audi, Porsche and other models.
  • 4 Hole Slim Frame For USA License Plate- The black frames for front and rear license plates are designed according to the American standard license plate, suitable for all Universal/novelty/customized 12*6 inch plates in the United States/Canada.Thin edge design , Will not cover the registration sticker on the metal license plate, and guarantee 100% legal street. 2 pack frame suitable for front bumper bracket and back trunk license plate holder for all cars, trailers, trucks, SUVs, 4runners.
  • Easy To Install- License Plate Mounting Hardware in the kit, including stainless steel license plate screw bolts, nylon inserts, carbon fiber screw caps. M6*20mm screws are suitable for plate mount of most models, and the license plate fasteners can lock the license plate firmly. 4 machi....
Check Stock

PRILINE Superhard Carbon Fiber Polycarbonate 1KG 1.75 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1kg Spool,Black

  • Material: Carbon fiber PC - Color: Black - Weight: 1 KG (approximately 2.20 lbs) Spool.
  • Size: 1.75mm (Tolerance Level : ± 0.03mm) - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20".
  • Recommended Printing Temp/Nozzle Temperature: 240-260°C (464-500°F), Base Plate Temperature: 80-100°C(176-212°F).
  • Performance Advantages: Superhard Carbon fiber Polycarbonate filament has perfect dimensional stability for warp free printing, excellent layer adhesion, and easy support removal.
Check Stock

Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)

  • [Super Durable Tungsten Material] MK8 extruder nozzles are made by paramount hardened tungsten steel, with long life use time than the normal brass nozzle. The hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long time printing，more heat-resistant than ordinary brass nozzle，MK nozzles is harder than brass nozzles，which makes it durable accurate and compatible with more filaments..
  • [High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK..
  • [High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Mak....
Check Stock

PRILINE Carbon Fiber Polycarbonate 1KG 1.75 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1kg Spool, 1.75 mm,Black

  • Material: Carbon fiber Polycarbonate - Color: Black - Weight: 1 KG (approximately 2.20 lbs) Spool.
  • Size: 1.75mm (Tolerance Level : ± 0.03mm) - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20".
  • Recommended Printing Temp/Nozzle Temperature: 240-260°C (464-500°F), Base Plate Temperature: 80-100°C(176-212°F).
  • Performance Advantages: PRILINE Carbon fiber Polycarbonate filament has perfect dimensional stability for warp free printing, excellent layer adhesion, and easy support removal.
Check Stock

VEVOR Screen Printing Press 4 Color 1 Station and 4 Pieces 20x20 Inch Aluminum Silk Screen Printing Frames with White 110 Count Mesh

  • Product Specifications: 4 Color 1 Station.
  • Silk Screen Printing Frames:Size: 20x20 Inch, Quantity: 4..
  • All Metal Construction & Durability: metal construction with electrostatic spraying and electroplating.
  • With white 110 mesh counts/inch Nylon & Teflon material..
  • Spring Device Design: The special design of the spring device that adjusts the screen up and down and the ingenious cooperation of the screen printing frame makes it easier for the user to operate according to the size and weight of the screen..
  • Excellent Printing Results: The perfect combination of screen printing machine and screen printing frame enables ink and scraper to be efficiently screen printed. After the printing is finished, the screen printing screen can be cleaned by screen washing agent and reused repeatedly..
  • Wide Application: This silkscreen press and screen printing frames can be used in costume, pillowcases, woven fabric, metal, paper, copybook, plastic, wood, glass, ceramic, leather and other products which need flat printing..
Check Stock

Official Creality Ender 3 S1 Pro 3D Printer with High-Temp Nozzle, All Metal Direct Drive Extruder, Flexible PEI Bed, CR Touch Auto Leveling, Upgraded Ender 3 3D Printers for Home Use, 220×220×270mm

  • ... new level, making it a great 3d printer for people..
  • Better Performance: The new “Sprite Pro” Direct drive all metal dual gear extruder is capable of temperatures up to 300°C with the equipped brass nozzle. The Creality 3D Ender 3 S1 Pro ensures quality extrusion and printing precision with fewer jams and is capable of a wider range of materials like TPU and Nylon and Carbon Fiber composites..
  • Smooth Finish: Upgrading from the standard glass bed to a new spring steel bed, the Ender-3 S1 Pro is capable of excellent adhesion and smooth surface finish out of the box. These new dual Z-axis lead screws will deliver consistently great prints..
  • Even more upgrades: 32-bit silent board, print resume support, and filament run-out sensor are all included for a better printing experience. printing experience..
Check Stock

Creality 3D Ender 7 3D Printer Core-XY Structure 250mm/s High-Speed Printing All Metal Dual Gear Extruder Build Volume 9.8in(L) x9.8in(W) x11.8in(H)/250x250x300mm (Ender 7 Black)

  • 1.High-speed printing, invigorating power:The Creality Ender 7 3D printer breakout in printing speed, up to 250 mm/s, 5 times faster than ordinary printers,enjoy instant high-speed printing while maintaining the same molding precision quality..
  • 2.Linear rail, higher precision:Utilizing linear guide technology to reduce movement resistance to a lower level, greatly improve printing speed and high precision positioning, and yet comes with similar stabl high-speed movement..
  • 3.Linear Rail & Core-XY Structure Offer a Higher Precision: Ender-7 utilizing linear rail technology to reduce movement resistance to a lower level, high precision positioning, and yet comes with high-speed stable movement.
  • Core-XY structure, dual motors running parallelly with coordinated operations, faster speed, and higher precision..
  • 4.Smooth discharge and stable feeding:Ender 7 customized large melt pool nozzle ensuring smooth discharge, all-metal dual gear extruder for stable feeding.Make the printer maintain a fast and smooth discharge performance in high-speed work..
  • 5.Professional after-sales and quick response: We have a professional technical team of 100+ staffs, and all product questions are directly replies by our technical team.We provide 24/7/365 after-sales service. If y....
Check Stock