ReviewsMetal Casting Part

Metal Repair Glue, Glue for Metal to Metal, Liquid Metal Glue, Heat Resistant Glue for Metal, Appliances Casting Metal Repair Paste, ab Glue for Radiator Pipe Tank Repair Metal Filler- 65 Gram

  • ⭐High heat glue:- Specifically design heat resistant epoxy sustain it properties at elevated temperature upto 150 degree celcius..
  • ⭐Wide-range of applications:- This cold welding liquid can used as metal to metal glue, casting appliance, equally applicable to other surfaces such as wood and concrete. common application as small hole repair in metal , metal to metal adhesive, liquid metal filler, radiator repair and pipe repair..
  • ⭐Instruction:- mix the 2 part epoxy metal glue equally, apply to clean surface and give it 12- 24 hours for full curing before Appling any load. for further instruction follow the instruction sheet inside the box..
  • ⭐long-lasting Bond Strength: forms a strong and stable permanent bond that should last for ages. Once cured, Metal cast iron magic repair glue forms a strong and stable permanent bond, which should be used for many years. can be shaped, tapped, filed, sanded and drilled depending on its purpose..
Check Stock

Metal Repair Glue, 2 Pack Metal Epoxy Glue Heavy Duty, High-Temperature Heat Resistant Adhesive Glue for Metal to Metal, Plastics, Stainless Steel, DIY Craft, Aluminum Alloy, Metal Tube

  • Muti-Purpose: Our metal epoxy glue is a two-part heavy-duty high-temperature epoxy adhesive with clear, fast curing that not only acts as a filler for casting defects such as iron, copper, and cracking Castings, but also can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass to repair machinery, tools, pipes, and more..
  • Easy Application: Our metal repair glue features a dual-syringe design for easy 1:1 mixing ratios. The metal repair glue is easier to use than the traditional A and B metal glue separation. Conveniently dispense equal parts two-part formulation resin and hardener to create a tough, rigid, high-strength bond. The unique syringe has a resealable cap to prevent drying out and leaks..
  • Long-lasting Bond Strength: Our heavy duty metal glue dries clear and repairs large or multi-piece projects with a permanent bond after only one application. It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs, and laminating..
  • Easy to Use: Just a few simple steps to use. When using our adhensive glue for metal to metal, u....
Check Stock

2.2lbs Delft Clay Casting Gold Silver Copper-Based alloys, Pewter

  • ✅ The Delft Clay Method is a highly refined form of sand casting that substitutes genuine Delft Clay from Holland for ordinary casting sand. The process was invented by Hans Karreman, a Dutch goldsmith. Delft Clay is much finer than casting sand, providing remarkably sharp and highly detailed castings in gold, silver, copper-based alloys, pewter, etc..
  • ✅ Castings require very little finishing work. Once you have cast your piece, the Delft Clay can be re-used. Since this is a cold-molding process, molds can be made from patterns composed of wood, wax, epoxy, plastics, and, of course, metal. Because this is a type of sand casting, it is best suited to producing castings without pronounced undercuts..
Check Stock

Saltwater Fishing Jigs 5pcs Metal Jig Spoon Lure Vertical Flat Sinking Jigging Lures for Striper Snapper Bluefish Surf Fishing

  • 【Jigging Lures】This jig metal spoons lures kit includes 5 different colors of jig lures, 5PCS lures come in one plastic box..
  • 【Attractive Jigs】Metal jig lures with laser holographic painted, vivid 3D fishing eyes, feather dressed sharp treble hooks, stainless steel split rings, strong and durable..
  • 【Casting Lures】The spoon lures has solid construction, offer effortless maximum casting distance. Ideal for casting and jigging present action in both saltwater and freshwater..
  • 【Good Performance】Slim profile generates erratic action when jigged and ripped through the water, 3D lifelike eyes, entice fish to strike and the feathered treble hook seal the deal..
  • 【Application】With rust resistance coating, the jig lures ideal for saltwater and freshwater. Catch bass, bluefish, walleye, pike, catfish, trout and other fish species..
Check Stock

30A Platinum Silver Gold Plating Machine Jewelry Plater Electroplating Rectifie Jewelry Plating Rectifier Surface Treatments Gold Plating Machine 110V

  • HIGHLY ACCURATE & PRECISE: Equipped with a prices pressure gauge, so you can read the current pressure easily, making relevant adjustments as needed to create a smooth surface. The vacuum chamber/casting cylinder control valve is made of premium metal material for easy and smooth switching.
  • DEEP DRAW VACUUM PUMP: The vacuum hood made of thick aviation plastic is beneficial to reduce the burrs and bubbles produced. The built-in refueling device is installed to adjust the refueling amount by referring to the standard line.
  • HEAVY-DUTY VACUUM INVESTING CASTING MACHINE: This Vacuum Investing Casting Machine is of heavy-duty construction for extremely durability. Features 4 rubber feet, ensuring the stability of the Equipment When Working.
  • JEWELRY CASTING MACHINE SIZE: 22.83"L x 10.8"W x 13.7"H. Ideal for jewelry processing factories and artwork manufacturers to make high-density, pretty jewelry, etc.
  • COME WITH: Vacuum cover, casting machine, rubber base, rubber ring, steel bell pliers, steel bell sleeve, steel bell.
Check Stock

Ingot Mold, Tool for Jewelry Making Jewelry Casting Molds, 4 in 1 Graphite Sphere Mold,Jewelry Making Precious Metal Torch Casting Kit for Melting Casting Refining Glass Marble Sphere Mold

  • High density graphite, impact resistant, durable and sturdy. Great impact resistance performance to ensure the reliability of product quality. excellent thermal stability for fast heating and cooling.Good heat transfer performance of graphite, reduce melting time and save energy..
  • Mainly used for glassblowing casting tool. Mainly used for glassblowing casting tool. Also can used for melting and casting metals such as Gold, Silver, Brass, Aluminum, Copper, Zinc, Plumbum, etc.
  • Good heat transfer performance of graphite, reduce melting time and save energy. High density graphite, impact resistant, durable and sturdy. Metal Casting Mold Easy to operate and convenient to use, long lifespan to ensure long service time..
  • Good heat transfer performance of graphite, reduce melting time and save energy. Easy to operate and convenient to use, long lifespan to ensure long service time. With this tool, you can make unique jewelry for your family, friends, and lovers. Iron mold for molds and melting of metal ingots including gold, silver, aluminum..
Check Stock

Orion Motor Tech Electric Radiator Fan Clutch, Fits 2002-2007 Chevy Trailblazer, GMC Envoy, Isuzu Ascender, Buick Rainier, Saab 9-7x, Replaces# 25790869

  • ???? NECESSITY — Electric Radiator Cooling Fan Clutch, can keep the engine cool while the engine is running, protecting the engine and is an essential part of the vehicle cooling system..
  • ???? APPLICATION — Compatible with following Vehicles–2002 2003 2004 2005 2006 2007 Chevrolet Trailblazer | 2003-2006 Chevrolet SSR | 2004 – 2007 Buick Rainier | 2002-2007 GMC Envoy | 2003-2007 Isuzu Ascender | 2002 – 2004 Oldsmobile Bravada | 2005 – 2007 Saab 9-7x– Please check fitment chart before place the order!.
  • ???? REPLACEABLE PARTS — OEM standard and finish (5 pins port), directly replaceable factory part. You can reach 15293048, 15-40133, 25790869, 8103830290, 622-001 for a proper fit every time..
  • ???? HIGH QUALITY — Durably constructed metal casting and clutch plate, rubber-coated harness and plastic connector for long-lasting use. Engine cooling fan clutch has undergone a rigorous inspection to ensure high quality, durability and reliability under extreme conditions..
  • ???? ORION MOTOR TECH —– We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know..
Check Stock

EnvironMolds Liquid Latex Mold Making Rubber 16-oz.

  • ✅ MULTI-USE latex liquid rubber. Used as a mold-making rubber to make flexible and durable latex molds to reproduce figurines, plaster moldings, statues, plaques, life castings and similar..
  • ✅ NO MIXING – Our one-part, liquid rubber air dries in 2-3 hours. It needs no mixing unlike mold making silicone rubber or even alginate molding powder..
  • ✅ BRUSHABLE APPLICATION—Brush on LayTex to reproduce the finest detail. Use soapy water to clean up and no vulcanization (no high heating) required..
  • ✅ NO RELEASE NEEDED LayTex needs no release on most materials allowing the user to keep his model’s surface clean and free of unwanted materials. Use on models made of metal, clay, plaster, wood, plastic, or glass. Release will be required when you use liquid latex for resin casting..
  • ✅ DURABLE & LONG LASTING LayTex liquid latex molds out last manmade rubber mold such as silicone and polyurethane rubbers. They are durable, reusable, and very economical to make..
Check Stock

Loctite Heavy Duty Epoxy Gel, Quick Set, 0.85-Fluid Ounce Syringe (Pack of 8)

  • 【Good Bonding Strength】This metal repair paste forms a strong and stable permanent bond, which can last a long time. According to different uses, it can be shaped, tapped, filed, sanded and drilled..
  • 【Effective Adhesion】Form a strong and stable permanent bond, this metal repair paste can provide a strong and long-lasting repair to metal and multiple other surfaces. It can bond almost any clean surface without dirt and oil..
  • 【High Temperature Resistance】Can withstand temperatures up to 150°C. After fully cured, it is as hard as iron and provides a uniform adhesive layer thickness..
  • 【Multi-purpose】This metal repair paste is mainly used to fill casting defects such as steel casting, sand holes, pores, and cracks. It can also be used to repair fuel tanks, pipelines, concrete cracks, etc..
  • 【Easy to Apply】Simple drying application programming. It is simple and convenient. Just mix, apply and let it dry for a few hours. Full curing time is up to 24 hours..
Check Stock

Graphite Crucible Set,Geevorks 6 Pcs Ingot Mold Set High Purity Graphite Torch Melting Casting Tool for Scrap Jewelry Metal Gold Melting Refining Forge

  • 【You Will Get】This 6 pieces graphite torch melting casting kit, including crucible bowl, tongs, trough, graphite stirring rod, rectangle graphite crucible and cylinder graphite crucible.【Please refer to the specific product size in the picture for the size.】.
  • 【High Quality】Using modern ceramic processing technology and fused silica as main r-aw material, the graphite crucible has nice thermostability, high purity, high strength, corrosion and shock resistance..
  • 【Multipurpose】These graphite ingot moulds are widely and commonly applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and much more..
  • 【Graphite Crucible】Designed for melting applications.Stirring rods help you evenly mix and stir precious metals during melting.
  • tongs are used to clamp metal casting mold under high temperature conditions..
  • 【Casting DIY】Ideal for satisfying lab, test analysis and other purposes.
  • Taking the product size into account, small-capacity metal melting projects will be more suitable..
Check Stock

Do-It Molds Hot Pot-2

  • 【Perfect for hobbyist】: The pot is not big, but in all honesty its perfect to make buckshot, fishing anchors, metal casting and more. Can melt pewter, lead, and metals with similar melting points. It takes about 10 min or so to initially melt the lead put in it, but once you have melted lead in the pot anything more you put in melts quickly. If you like metal casting, you must not miss this temperature control lead melting pot!.
  • 【Upgrade Material】: The tin melting pot is made of high-quality titanium-plated stainless steel, which is resistant to high temperature, fast heat conduction and corrosion resistance. The lead melting pot with spout of the hand-held tin melting furnace can be rotated 360 degrees. Makes an excellent melting pot for small objects being poured into a mould. You can pour directly from the crucible to retain the heat right up to the pour..
  • 【Heat resistant handle and Rapid Heating】:Electric melting tin furnace adopts metal heating core (nickel chromium wire), rapid heat transfer, rapid temperature rise. Outer double-layer sleeve design, longer service life. The handle is made of high temperature resistant material, it will not get hot, it is comfortable to hold and easy to carry..
  • 【Temperature Regulation Design】:No....
Check Stock