ReviewsMetal Conduit Clamps

8 Pack | 6\ Pre-Cut PVC Rooftop Support | Pipe Support | 100% Recycled PVC

  • Popular Rooftop Sleeper Support Already Pre-Cut to 6" (152.4 mm) Length | Cost Effective Rooftop Pipe Support Solution.
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC

  • Can Be Cut to Desired Lengths | Suggested minimum length is 6" (152.4 mm) to provide adequate stability..
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

Klein Tools 935 Level, 9-Inch Magnetic Torpedo Level with 3 Vials and V-groove, Tapered Nose

  • Level's high-visibility orange body is easy to see on conduit and at the jobsite.
  • Torpedo level has large, easy-to-read high-visibility vials at 3 angles: level, 90 and 45 degrees.
  • Large top-view vial windows enable easy readability from multiple angles.
  • Magnetic bottom holds securely to conduit and metal surfaces.
  • V-Groove fits contour of conduit and pipe.
Check Stock

Southwire - 63029840 Tools & Equipment FTSP45-75NCT Simpull Electrical Fish Tape with Non-Conductive Tip, Large Case, 4.5mm x 75 Feet

  • Works great in either filled or empty conduit.
  • TWO LEADER OPTIONS: comes with either a 360° swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
  • FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
  • SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.
  • EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded.
Check Stock

Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit

  • ✅【PRODUCT DESCRIPTION】: The STV-90 dryer duct exhaust connector consists of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
  • ✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
  • ✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve t....
Check Stock

AMZCNC 8 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set (8T(1/2"~2"))

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage..
  • Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8".
  • Max thickness for stainless steel: 1/16"..
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weigh....
Check Stock

9 Pack | PVC Rooftop Support | Pipe Support | Can Be Cut to Desired Length | 100% Recycled PVC

  • Can Be Cut to Desired Lengths | Suggested minimum length is 6" (152.4 mm) to provide adequate stability..
  • Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes.
  • Affix Pipes to Support Block with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included).
  • Made of 100% Recycled PVC | Made in the USA | Versatile | Durable | Affordable.
Check Stock

Rubber Cushion Strut Clamp 1" NOM (1-1/8" OD) for Mounting Copper Piping, PEX Pipe, CVPC Tubing to Strut Channels [5 Pack]

  • [QUALITY] Zinc plated to prevent corrosion, the heavy duty steel strut clamp brackets with attached bolt and nut clamp securely over a hard rubber cushion to nearly surround the sides of a pipe or tube..
  • [PROTECTIVE RUBBER CUSHION] The hard rubber cushion protects pipe and tube by absorbing shock caused by vibration and temperature changes, reduces unwanted noise, insulates pipe and tubing from metal surfaces, and prevents galvanic corrosion..
  • [APPLICATION] Insert pipe or tube into rubber cushion inside steel strut brackets. Mount strut clamp legs to 1" NOM (1-1/8" OD) strut channels. Attach nut to bolt and tighten..
  • [CONTENTS] Each of the 5 clamps contain two heavy duty zinc plated steel half brackets with attached bolt, a nut, and protective rubber cushion..
  • [VERSATILE] Use for 1" NOM (1-1/8" OD) copper pipe, PEX pipe, CPVC tube, and other conduit tube, hose, and wire applications. Can be hung vertically and horizontally on walls and ceilings. Compatible with unistruts in 1-5/8", 7/8", 13/16" heights..
Check Stock

Southwire FTSP45-125NCT Simpull Electrical Fish Tape with Non-Conductive Tip, Large Case, Two Leader Options, Spiral Extruded Polymer, Extremely Flexible, 4.5mm x 125 Feet

  • Works great in either filled or empty conduit.
  • TWO LEADER OPTIONS: comes with either a 360 swiveling flexible metal leader (580 lb. strength) or a non-conductive glow in the dark leader (380 lb. strength).
  • FASTER, EASIER PULLS: low friction design allows the tape to easily glide through the conduit without binding at turns, joints or couplings.
  • SPIRAL EXTRUDED POLYMER design does not rust and reduces the amount of effort required to push or pull the fish tape through EMT, IMC, rigid, or PVC conduit.EXTREMELY FLEXIBLE: Combining the strength of steel fish tape with greater -flexibility than fiberglass fish tapes, this fish tape will not break when folded..
Check Stock

Morris 19426 Heavy Duty Rigid Pipe Strap, Steel, 1 Hole, 1\ (Pack of 25)

  • Overall Size: 155x 30 x 80mm/ 6.10" x 1.18" x 3.15"(L*W*H).
  • Special slotted design makes it more sturdy and not easy to deform.
  • Made from 304 premium stainless steel material. Anti rust, anti-corrosion. Clamps are sturdy, strong and reliable.
  • The surface is super smooth and burr-free with the fine workmanship.
  • Use to secure rigid or IMC conduit to wood, masonry, widely used in stainless steel pipes, rubber hoses.
Check Stock

Morris Products 14940 EMT Compression Connector, Steel, 1/2\ Trade Size (Pack of 25)

  • EMT Compression Connectors - Steel - EMT Compression Connectors are Used To Secure EMT Conduit in an Enclosure..
  • Use to connect EMT Conduit to Steel Outlet Box, Load Center, or other Metal Enclosures.
Check Stock