ReviewsMetal Drill Bit Brand

Yougfin Step Drill Bits with Automotive Center Punch,Unibit Titanium Coated High Speed Steel Step Bit Set for Hole Drilling,50 Sizes with Aluminum Case for DIY Lovers,5+1pcs

  • 【High Quality Material】：High-speed steel, also known as HSS, is the most common drill bit for metal applications. It incorporates an element with titanium that makes the drill bit harder than a typical HSS bit and thus suitable for sheet metal working and are ideal for cutting non-ferrous metals, plastic, wood board, etc.
  • 【Extra Automatic Center Punch】：You know how when you try to drill into metal or hard surfaces and your drill bit "walks" no matter how much you think it's steady? Yeah, we have a tool for that. The automatic center punch has a heavy-spring action, and you simply place the tip where you want to drill, and it punches a slight indentation in the surface. Just enough so that the drill bit won't walk.
  • 【118° Split Point】：These step drill bits have a small point angle of 118° and require less pressure when centering in the material. The point starts drilling at contact, reducing friction, pressure, and heat. The larger the point angle, the higher the contact pressure and the centering in the material requires more pressure.
  • 【Double Flutes & Tri-Flatted】：These drill bits feature a special dual flute straight design for dependable performance and durability. And the shanks on these step drill bits have three f....
Check Stock

IRWIN Drill Bit Set, General Purpose, 3/8-Inch Reduced Shank, 29-Piece (60148)

  • These drill bits are constructed of M-2 high-speed steel for strength, as well as heat and wear resistance.
  • Each drill bit has a standard 118° point for use in metal, wood and plastic.
  • 3/8-inch reduced shank fits most 3/8-inch drills.
  • These IRWIN drill bits come in a metal index case.
  • Includes 1/16″ through 1/2″ drill bits in 1/64″ increments.
Check Stock

DEWALT Drill Bit, Black Oxide, 3/8-Inch x 12-Inch (DW1610)

  • 135 degree split point drills on contact and prevents walking.
  • Parabolic flute design improves chip ejection in metal and wood drilling applications.
  • Black oxide coated for greater wear resistance.
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute.
Check Stock

HILTEX 10005 Jumbo Silver & Deming Drill Bit Set, 8 Piece, 1/2' Inch Shank Industrial Large Drill Bit Set 9/16” Drill Bit to 1' Drill Bit, Metal Drill Bits for Steel, Reduced Shank Drill Press Bits

  • HIGH SPEED STEEL: These metal drill bits for steel are made of high speed stainless steel and is designed to ensure sharp and fast execution in any material leaving clean results. This 8-piece drill-bit set is capable of drilling through plastic, copper, stainless steel, and other surfaces..
  • LARGE DRILL BIT SET: Heat treated carbon steel with a black enamel coating is durable and can withstand heavy duty operation for a long tool life..
  • PRECISION DRILLING SET: Bit is precision ground with geometry of 135-degree split point for quick self-centering penetration and an accurate start that prevents walking and clears chips and particles faster..
  • DRILL PRESS BITS: Tri-flat on the shanks of drills are constructed for tighter chucking maximizing security for precise holes. This pattern allows the bits to fit securely into your power tools and helps eliminate slippage..
  • DRILL BIT SET INCLUDES: Complete set of 8 pieces come in a convenient storage case for easy storage and portability.
  • sizes include: 1/2″ Shank x 9/16″ Drill Bit, 5/8″ Drill Bit, 11/16″ Drill Bit, 3/4″ Drill Bit, 13/16″ Drill Bit, 7/8″ Drill Bit, 15/16″ Drill Bit, and 1″ Drill Bit.
Check Stock

ASNOMY 5pcs Titanium-Plated Pilot Drill bit for Hole Saw, Hole Saw Center Drill bit for Metal, Steel, Iron, Wood, Plastic

  • Compatiable: Pilot drill bit for ASNOMY metal cutting TCT carbide hole Saw series.
  • Top Quality: Made From top quality 6542 Steel material and Titanium-plated, ensuring its long life on metal drilling.
  • Shank size: 15/64 inch(6mm), Whole Length: 2-11/16 inch(68mm).
  • 5pcs Pack: Including 5 pcs Center drill bit, don’t worry about not having enough center drill bits, Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • Note: The pilot drill bit is made of 6542 steel，making this pilot drill is very hard and brittle. Please keep the drill straight and do not twist or swing sideways..
Check Stock

Makita A-98348 50 Piece Impactx Driver Bit Set

  • 【All-In-One Convenience】Comprehensive 112 pcs impact driver bit set includes a wide variety of drill bits and driver bits as well as kinds of sockets and bit holders to help assist in a number of drilling and fastening applications such as wood, metal, masonry and more..
  • 【Hex Shank & Quick Change】1/4" hex drill and driver bit set fits well for fast and easy bit changes and no drill bit spin out. Compatible with 1/4 inches impact drivers, screwdrivers/screw guns and 3/8 inches or 1/2 inches drill/drivers..
  • 【Premium High Quality】The included screwdriver bit set feature designs and higher-grade material to lessen damage to the screw head and provide better bit-gripping power. Drill bits made from superior HSS material are titanium coated for long-lasting strength and durability..
  • 【Portable & Well Storaged】Comes with a tough transparency case for secure storage, easy access, organizing and portability. Also with sponge cushion between the upper and lower halves to keep the bits from getting scattered around everywhere after repeated use..
  • 【What You Get】Full impact drill bit kit set includes 18* titanium drill bits, 5* masonry drill bits, 3* spade drill bits, 8* nut drivers, 56* 1” bits, 15* 2” bits, 3* magnetic bit holders, 1* qu....
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

COMOWARE Stubby Drill Bit Set for Metal, 5pcs HSS M2 Short Length Drill Bit with 1/4-Inch Quick Change Hex Shank

  • Premium High Quality - Short length drill bit is made from superior HSS M2 material with evenly distributed carbides for long lasting strength and durability. The drill bit is always sharp at each use..
  • Twist Design - Full ground processing and 135 degrees split point clears chips & particles faster, it also delivers powerful penetration against the metal , plastic, wood and other hard surfaces..
  • Quick Change - 1/4” hex shank fits into all power tools more easily and securely, it is suitable for quick change drill chunks for fast and easy swapping..
  • Application Widely - The drill bit set includes 5pcs of drill bits in 5 different sizes to satisfy your demands: 3/32”, 1/8”, 3/16”, 1/4”, 5/16”. The drill bit set is more suitable for processing plastics and woods, it can be also used for hard metal..
Check Stock

8 PC WOOD PLUG CUTTER CUTTING TOOL DRILL BIT SET STRAIGHT AND TAPERED TAPER

  • PRECISE: This drill bit set includes 7 metal drill bits designed for precise drilling.
  • MATERIALS: Suitable for drilling into wood, soft metal, plastic and plexiglass.
  • DRILL BIT SIZES: 0.8 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm, 2.8 mm, 3.2 mm diameters.
  • MULTIPURPOSE: Ideal for woodworking and masonry drilling with a rotary tool.
  • INCLUDED: 7x drill bit in convenient tool box.
Check Stock

Dremel 628 Precision Drill Bits, Accessory Set with 7 Multipurpose Drilling Bits for Rotary Tool

  • PRECISE: This drill bit set includes 7 metal drill bits designed for precise drilling.
  • MATERIALS: Suitable for drilling into wood, soft metal, plastic and plexiglass.
  • DRILL BIT SIZES: 0.8 mm, 1.2 mm, 1.6 mm, 2.0 mm, 2.4 mm, 2.8 mm, 3.2 mm diameters.
  • MULTIPURPOSE: Ideal for woodworking and masonry drilling with a rotary tool.
  • INCLUDED: 7x drill bit in convenient tool box.
Check Stock

OXMUL Step Drill Bits for Metal, 3/16 to 7/8, M2 HSS, Duty for Stainless Steel, Mild Steel, Hard Metal, Aluminum, Wood, Copper, PVC, 12-Steps. 2-Spiral-Flute. #201

  • [M2 HSS Coated] Made of M2-Coated HSS, this stepped Drill Bit have 5X Longer Life of Regular Drill Bit. This Step Bit drill 2X Faster for Stainless Steel, Hard Metal, Mild Steel, Galvanized Steel, Aluminum,Iron, Wood Plate, PVC and Copper. If you want to drill faster and many holes on metal, then please choose this step drill bit.
  • [Duty for Stainless Steel] A test. Drill in 1.3mm thick Stainless Steel square pipe. This Step Drill bit successfully drilled 12 holes. But another Titanium Step Drill only drilled 1 holes, then blunt.
  • [12 Steps & 2-Spiral Flute] Drills 12 different hole sizes, from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral Flute:Clears Chips faster.
  • [118° Split Point Tip] Split Point tip prevents "walking," gets fast starts, and eliminates the need for pilot/starting hole.
  • [3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.
Check Stock