ReviewsMetal Machining

SpeTool 3 Flute Carbide End Mill for Aluminum Non-Ferrous Cutting Tool Upcut Bit for CNC Machine, 1/2 Inch Shank, Extra Long 4 Inch

Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length.
The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/2" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

Check Stock

TCI Precision Metals 6061 Aluminum Sheets and Plates Precision Ground Flat and Milled .250' X 12.000' X 18.000' Thick

MACHINE-READY BLANKS – Our Standard Sized Machine-Ready Blanks are available in a wide range of pre-configured sizes. Parts are clean and prepped, ready for final machining..
GROUND AND MILLED – We do all the hard work so you don't have to. The 6-side line aluminum sheets and plates are precision ground on 2-sides (thickness) to +/-.002” and milled on the length and width to +/-.002”..
REDUCES PREP TIME – Aluminum plates arrive clean and ready to go from receiving to machining without prep time. Reduces setup time, scrap, and overall cycle time..
VERY VERSATILE – 6061 Aluminum metal plates are very versatile. Can be used in a wide variety of fabrication projects due to its machinability, bending, weldability, and corrosion resistance..
PRECISION IS IN OUR NAME – Our blanks are made flat and parallel (as close as .002″) and tighter, and designed to stay that way..

Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.

Check Stock

Threads

【5Pcs Solid Carbide Burr Bits】The grinder drill set is made of tungsten carbide, high sharpness and good toughness, machining hardness up to HRC70, great for carving, polishing, drilling.
【Metal Die Grinder Drill Bit】The rotary file is widely used for processing metal(include hardened steel) and non-metal( like wood, bone and marble), perfectly fits for die grinder and drill.
【1/4” Shank Rotary Burr】Size: Shank-1/4inch(6mm), Tip Head-5/16inch(8mm), Total Length 58-65mm, Cutting Burr Shape: Ball, Round Nose, Pointed Tree, Cylinder with End Cut and Cylinder with Round Head.
【Double Cut Head Design】The double burr can cut cleanly and quickly through hardened steel, with smoother surface and no dust pollution compared with grinding wheels or steel cutter.
【Wide Applications】The tungsten grinding bits are widely used in woodworking carving, mold processing, burr cleaning and impeller polishing.
Plus package comes with plastic case for safety storage and protection.

Check Stock

3PCS BAP300R C10-10-120-1T/C12-12-130-1T/C12-13-130-1T 1Flute Indexable End Milling Holder+ 6PCS APMT1135PDER CNC Inserts+3PCS T8 Wrench (3PCS 300R End Milling Holder)

* Package includes ：1PCS 300R C10-10-120-1T +1PCS 300R C12-12-130-1T+1PCS 300R C12-13-130-1T+ 6PCS APMT1135PDER + 3PCS T8 wrench. If you need more APMT1135PDER, please search ASIN：B097RG372M..
* High performance replaceable inserts, anti-seismic high-quality alloy steel, can effectively suppress vibration..
* It is suitable for rough machining, finish machining, digging machining, groove machining and cutting machining..
* The screw offset fastening design makes the inserts and groove closely combined, enhances the rigidity, and the processing effect will be better..
* The handle strictly abides by the process of first vacuum quenching and then tapping to avoid the deformation caused by first tapping and then quenching. It is firm and durable and can prolong the service life..

Check Stock

Low Profile Ball Head All Metal Tripod Ball Head Panoramic CNC Ball Heads Camera Mount with Two 1/4 Quick Release Plates for Tripod DSLR Camcorder Max Load 55.1lbs/25kg

【Low Profile More Stable】The ball head is designed with a low center of gravity, CNC machining, 44MM large ball diameter, making it extremely....
【Excellent Quality】The low profile ball head adopts all-metal structure, 0.1MM machining tolerance, anodic anodized, ultra-high-strength aviation....
【Excellent Design】Double grooves and lightweight design. The maximum load-bearing capacity of this low profile ball head camera mount is 44....
【Precision Adjustment】4 * 90 degrees, 5 degrees per scale, and double spirit bubbles to meet the needs of accurate photography and Panoramic....
【Widely Applicable】3/8"screw holes at the bottom of the ball head and easy to install tripod, monopod, camera slider and mini tripod. With 1/4"....

Check Stock

Lacerta Files [Explicit]

PRODUCT SIZE -- 6" flat file total lenth 7.3inch width 0.6inch thickness 0.16inch.
QUALITY MATERIAL -- Each file tool is made of high carbon steel, high frequency quenching, high hardness, ensuring strength and durability for long-lasting use..
WIDE APPLICATION -- Our hand file can be used for metal deburring,wood rasp,processing hard wood, metal chamfering,sanding sticks for plastic models,tooth file for shaping,trimming and chamfering, polishing rough machining, heavy duty usage. Suitable for shaping metal, wood, plastic, plaster, wallboard, glass and etc. Ideal for wood carving, stone carving, remodeling, boat repair, pattern shops, foundries, etc..
EXQUISITE STRUCTURE -- The fine-grained texture double-cut tooth structure makes it a great multipurpose tool for professionals and DIYers alike.
AFTER-SALES SERVICE -- We aim to provide the best service to our customers. Just try it, and if you have any questions about our product, please feel free to contact us. We will refund or replace your purchase..

Check Stock

HTD 3M 150-5100 Close Loop Timing Synchronous Belt 10/15/20mm Width 3mm Pitch

Specifications: 4M11T, outer diameter: 52mm, inner hole: rough machining.
Specifications: 4M13T, outer diameter: 60mm, hole: rough machining.
Specifications: 4M15T, outer diameter: 68mm, hole: rough machining.
Fast Shipping Guarantee: All parcel will be delivered in 7-15 days.

Check Stock

Amerock Full Inset Partial Wrap Free Swinging Minaret Tip Hinge for 3/4\ Doors Oil Rubbed Bronze Single (1)

Use bit (AWM5R) for the door machining and (AWM5AJ) for the face frame machining.

Check Stock

Deburring Tool Kit NB1100 Handle with a Blade + 10pcs Extra BS1010 Deburring Blades Burr Trimming Scrapers

These tools are adopted sharp cutting edge for cutting, machining surface are high smoothness..
【Complete Deburring Tool Set】-NB1100 Handle with a Blade + 10pcs Extra BS1010 Deburring Blades. Definitely one value pack of metal blade deburring....
✮10pc BS1010 for Ordinary Trimming Blade: HSS high speed steel. blade diameter 3.2MM. Suitable for soft metal, such as plastic copper, aluminum and....
【Sharp & Durable Blades】-The blades are made of tempered high-speed steel, which makes the edge sharpness and blade hardness and toughness....
【Wide Applications】-From home use DIY projects to professional industrial applications, works on metal, steel, copper, aluminum, plastic, PVC,....

Check Stock