ReviewsMetal Pipe Processing Machinery

Taidacent Non Contact Water Level Sensor Flow Sensor Float Switch Water Level Switch High and Low Level Output

The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container..
The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production..
The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected..
The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used..
High and low level output: If there is induction, the output is high level.
no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection.

Check Stock

Taidacent Non Contact Liquid Level Sensor Contactless Water Tank Water Level Sensor for Tank Water Level Control with Low and High Level Output

The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container..
The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected..
The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used..
High and low level output: If there is induction, the output is high level.
no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection.
You can adjust sensitivity: Remove the plastic cover of the sensors and turn the very small screw, clockwise decrease sensitivity, counter clockwise to increase the sensitivity..

Check Stock

2Pcs 6000-2RS Bearings 10x26x8mm Ceramic Miniature Ball Bearing ZrO2 Deep Groove Race Ball Bearing

... deform when subjected to force, so it is conducive to improving the working speed and achieving higher accuracy..
【Broad scope of application】Widely used for medical apparatus and instruments, cryogenic engineering, optical instrument, high-speed machines, high-speed electric machinery, printing machinery, food processing machinery, aviation, spaceflight, navigation, petroleum, chemical industry, automobile, electronics, metallurgy, electric power, textile, pumps..

Check Stock

XINGYHENG Hex Brass Female Pipe Fitting Thread Straight Pressure Reducing Valve Connector CGA-320 to CGA-580 - CO2 Reducing Pipe Nut Fittings NPT1/4 Tank to Argon Pressure Regulator

1.Durable material: The pipe fittings are made of brass and are resistant to corrosion, high temperature ductility and low magnetic conductivity., it is solid, durable, stable and reliable, with high hardness.
2.Strict standards: Standardized processing, complete character specifications. The specifications includes brass pipe fitting with 24MM/0.94" Length 1/4 Female G threads..
3.Perfect detail processing: Keep improving, brass plating on the surface, smooth and durable, the mother-child interface is smooth, not easy to fall off, and the detail processing is perfect and beautiful. Hex nut head, regular shape, thick material, perfect arc design, rounded edges, no burrs..
4.Excellent performance: Brass pipe fitting is designed with female thread and hexagonal shape. For connecting Male threaded threaded threaded pipe, Matching threaded screw. good plastic toughness, small connection deformation, reliable force transmission, good fatigue performance, easy to check..
5.Wide application: Copper pipe can be connected to copper, brass, plastic, aluminum and welded steel as fast joints, easy and fast connection. Widely used in Use in plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening..

Check Stock

WD-40 - 30035 Specialist Cleaner & Degreaser 32 OZ [Non-Aerosol Trigger]

Powerful grease remover and grime fighter in a biodegradable bio-solvent formula with durable, shatter-resistance trigger and convenient refill port.
Safe to use on multiple surfaces. Unlike other degreasers, this formula will prevent glass from etching and aluminum, copper, and metal from corroding....
Non-flammable, non-corrosive, non-abrasive, low-odor formula that can be used in food-processing facilities.
Biodegradable formula meets U.S. EPA Safer Choice Standards and is 50-state VOC compliant. NSF Registered A1, A2, A4, A8, B1.
Excellent for cleaning greasy automotive parts, tools, shop floors, industrial machinery, commercial appliances, and equipment.

Check Stock

WD-40 Specialist Cleaner & Degreaser 24 OZ [Non-Aerosol Trigger] [4-Pack]

Powerful grease remover and grime fighter in a biodegradable bio-solvent formula with durable, shatter-resistance trigger and convenient refill port.
Safe to use on multiple surfaces. Unlike other degreasers, this formula will prevent glass from etching and aluminum, copper, and metal from corroding....
Non-flammable, non-corrosive, non-abrasive, low-odor formula that can be used in food-processing facilities.
Biodegradable formula meets U.S. EPA Safer Choice Standards and is 50-state VOC compliant. NSF Registered A1, A2, A4, A8, B1.
Excellent for cleaning greasy automotive parts, tools, shop floors, industrial machinery, commercial appliances, and equipment.

Check Stock

Foam Pipe Insulation,Foam tubing for 1 inch Pipe ,25mm(1") ID 35mm OD 6.5 Foot Length Black

APPROX. SIZE – 25mm inner dia, 35mm outer dia, 5mm wall thickness, 6.5foot total length.
MATERIAL –The tubing is made of Rubber material, wear resistance, anti-aging, good elasticity, strong bending,Working temperature is -40°C to 80°C(-40°F to 176°F)..
ADVANTAGE –High elasticity, strong tensile, easy to bend, and aging resistant,Anti-skid foam is fixed on tools or appliances and is not easy to slip..
MULTIPLE USAGE – Household fitness equipment anti-collision pipe, industrial machinery anti-collision pipe, household fitness equipment anti-collision pipe, handle sponge cover, protection and insulation, water pipe insulation and insulation..
HOW TO USE – When installing the pipe, wet the steel pipe with lubricant and water, and then install a sponge, so it is easier to install the pipe..

Check Stock

Snap Socket on to Stem with Hand Ratchet

Overall dimensions: length 28 X width 28 X height 51.2mm..
Used in 23 X 23MM square pipe mouth, suitable for matching pipe office furniture products or fixed caster components..
Very suitable to be used as a replacement caster bar for chairs, tables, shelves, filing cabinets, machinery, etc..

Check Stock

Stick Welder,110V/220V Dual Voltage 200Amp ARC Welding Machine IGBT Inverter Portable Lightweight DC Welder LCD Display for Beginner with Electrode Holder Clamps Welder

【Mini Arc Welder Compact & Light Weight】: Easy carry and storage,high frequency household smart welder.
【Safety Protection &IGBT Control Welder】: Mini stick welder is controlled by IGBT that ensures exact current, low splash and smooth joint. This arc welding machine is easy to operate even for entry level welder.
【MMA Welder Support 2.5mm- 4.0mm Welding Rods】: Whole day welding. It is applicable for welding all kinds of ferrous metals such as carbon steel, medium carbon steel and amongst others.
【Widely Application Welding Machine】 : The arc mma welder(stick welder)uses such as machinery manufacturing, sheet metal processing, automotive maintenance, guardrail, iron processing, hardware and so on.
【Good After Sales Service Welder】 : If you don’t like this DC inverter arc 110V/220V welder,we promiss 45 days full refund Service. If quality issue occurs we promise replacement a new welder within 2 years.

Check Stock

CertBuy 20 PCS 5/8 Inch Ball Transfer Bearing Casters, Roller Ball Transfer Bearing, Stainless Steel Ball Bearing Rollers, Universal Base Roller Ball for Conveyor, Roller Stand, Load Capacity 55lbs

【CAPACITY】Rollers have 5/8 inch hardened steel balls rotating on 1/8 inch internal bearings for smooth movement.With a load bearing capacity of 33 lbs.each..
【360 UNIVERSAL TRANSFER BEARINGS】Flexible,high-speed and stable operation,precisely and with minimum effort in any direction..
【APPLICATION】Ball Transfer is suitable for electronics,hardware,machinery,chemical, food,forest,mining,supermarkets,rubber and other industries.Widely used in transmission system,feeding system,processing system,processing machinery,wooden case,transmission furniture,workbench,etc..
【STRONG&DURABLE】Ball support cup is hardened and plated,protective cover assures low torque and longevity..
【PACKAGES】Size:70 x 50 x 33mm/2.8" x 2" x 1.3"(L*W*H),they come with 16 pieces for you to install,make your life convenient,hope you enjoy the fun of DIY..

Check Stock

HyFlex 11-840 Ergonomic Abrasion-Resistant Nylon Spandex Nitrile Coated Industrial Gloves for Automotive, Fabrication - Large (9), Black (12 Pairs)

KNITTED WORK GLOVES: Gloves with foam nitrile coating ideal for aerospace, automotive, machinery, metal fabrication, automotive aftermarket, food processing, oil and gas, utilities, and warehousing industries.
ABRASION-RESISTANT: Foam nitrile coated gloves provide twice the grip and up to 20% greater abrasion protection than other gloves.
ERGONOMIC PROTECTION: Black gloves feature ERGOFORM Design Technology for optimal fit, reduced hand strain, and all-day comfort.
SIZE 9 GLOVES: Safety gloves available in sizes 5, 6, 7, 8, 9, 10, 11, and 12, ranging from 8" to 11".
INCLUDES: 12 pairs of HyFlex 11-840 work gloves.

Check Stock