ReviewsMetal Pushbutton

Anbull 1500W Electric Rebar Bender,Hydraulic Rebar Bending Machine Bending up to 1 Inch #8 25mm Rebar with an Extra Set of 10-18mm #3 - #6 Rebar Bending Head, Rebar Bending Angle 90 Degrees or Greater

  • Dual use head allows bending for both 3/8 Inch and 1/2 Inch rebar (No3 and No4).
  • Pushbutton extends bender to 35 Inch for maximum leverage.
  • collapses to just 21 Inch for convenient storage and portability.
  • 14 position indexing head adjusts with center pushbutton to allow total access for maximum leverage.
  • Extra sturdy steel handles for the toughest conditions.
  • Super strong indexing head grips rebar securely for accurate bends.
Check Stock

APIELE 19mm Latching Push Button Switch 10A 12V LED Waterproof Stainless Steel Round Self-Locking 1NO Contact(Red, 19mm)

  • GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH..
  • Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch.
  • LED voltage: 12V only, Hole size required: 0.74''/19mm.
  • Latching Push Button Switch: Push it, ON.
  • Push it again, OFF. Contact Configuration: 1NO.
  • 4.8 mm wide X 0.8 mm thickness Terminal Pin for High Current Use.
  • Longer work life: Electrical life: 500,000 times. Mechanical Life: 2,000,000 times..
  • High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment..
Check Stock

JIQI 19mm 2Packs Latching Push Button Switch Waterproof 12V-24V Self-Locking Push-Button Switch 1NO 1NC Power Symbol LED Industrial Switches with Wire Socket Plug for 3/4\ Mounting Hole(Red)

  • BRAND NEW PUSHBUTTON SWITCH: 19mm Latching Black Metal Power Symbol LED.
  • IP66 WATERPROOF DEGREE: High quality metal material and can be used in wet or dusty enviroment..
  • WORK LIFE: Mechanical life-500,000 cycles.The work life of the led light is more than 40,000 hours..
  • WIDE APPLICATION: This 12V-24V push button switch can be used as an access control button, replacement for electric equipment ,home appliance etc...
Check Stock

DaierTek Waterproof Latching Push Button Switch 12V 19mm ON Off Black Metal Pre-Wired 12 Volt Blue Led Light Illuminated for Marine RV -8 Pack

  • Specification: 19mm ON-OFF latching push button switch, black metal design with blue LED lights. Switch rating: 5A 12V DC. Mounting hole size required: 3/4 inches. Switch bezel diameter: 21.8mm..
  • Label Sticker: The 12v push button switch will come with label stickers, which contains 50 different symbols to help you easily and quickly find the pushbutton switch you want among switches with the same appearances..
  • LED Illuminated: Push button switch with 12V blue LED light illuminated, If you want to use it in an 120VAC environment, please connect a 150KΩ resistor in series to the LED pin..
  • IP65 Waterproof: This 19mm self-locking push button switch with high quality black aluminum material & IP65 waterproof protection can be used in wet or dusty environment..
  • Application: 12 volt metal push button switch can be applied to marine, rv, car, motorcycle, electric equipment, household appliance, machine, etc..
Check Stock

(Pack of 2) APIELE 19mm Momentary Push Button Switch Waterproof Stainless Steel Metal Flat Top 12V 24V 36 DC 110V 250V AC 5A 1NO SPST Screw Terminal APIELE

  • GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH..
  • Brand New Silver Stainless Steel Flat Round Pushbutton Switch.
  • 19mm Momentary Push Button Switch: Push & Hold, ON.
  • Release, OFF, Contact Configuration: 1NO.
  • Electrical life: 200 thousand times. Mechanical life: 1,000,000 cycles.
  • High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment..
Check Stock

APIELE 12mm Latching Push Button Switch SPST Pre-Wired 150mm High Round Head Aluminium Alloy 1NO 1 Normally Open with Ring Led Pack of 2 (Blue)

  • GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH..
  • 2 PCS Brand New Pre-wired 12mm Black Aluminium Alloy LED Pushbutton Switch.
  • LED voltage: 12V only, Hole size required: 0.5''/12mm.
  • Push it again, OFF. Contact Configuration: 1NO.
  • ATTENTION: This switch is a very small one. Please read the Spec before purchase.
  • High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment..
Check Stock

APIELE 16mm Momentary Push Button Switch On Off Stainless Steel with 12V LED Angel Eye Head for 16mm 0.63" Mounting Hole with Wire Socket Self-reset (Blue)

  • ATTENTION: This is a Momentary Push Button Switch! Push & Hold, ON.
  • Release, OFF, Contact Configuration: 1NO1NC.
  • Brand New Silver Stainless Steel Ring LED Momentary Pushbutton Switch.
  • LED voltage: 12V only, Hole size required: 0.63''/16mm.
  • Electrical life: 200 thousand times. Mechanical life: 1,000,000 cycles.
  • High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment..
  • GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH..
Check Stock

APIELE 10 Amp 22mm Latching Push Button Switch 12V Angel Eye LED Waterproof Stainless Steel Round Self-Locking 7/8'' 1NO 1NC 1 Pack (10 Amp/Blue Led)

  • GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH..
  • Brand All New Design Silver 10A Stainless Steel Ring LED Pushbutton Switch.
  • LED voltage: 12V only, Hole size required: 7/8''/22mm.
  • 22mm Latching Push Button Switch: Push it, ON.
  • Push it again, OFF. Contact Configuration: 1NO1NC.
  • 4.8 mm wide X 0.8 mm thickness Terminal Pin for High Current Use.
  • Longer work life: Electrical life: 500,000 times. Mechanical Life: 2,000,000 times..
  • High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment..
Check Stock

APIELE Interior Lights Switch, ON Off SPST Rocker Toggle Switch Stainless Steel 10A 12V 24VDC Pre-Wired 19MM 0.74" Install Sizefor Car Boat Truck, 3 Year Warranty (Interior Lights)

  • GET NEW ONE IF NOT MAN MADE BROKEN IN 3 YEARS SINCE YOU PURCHASE THE SWITCH.
  • Brand New Silver Stainless Steel LED Interior Light Ring LED Pushbutton Switch.
  • LED voltage: 12V only, 10A For 12V-24VDC. Hole size required: 0.74''/19mm.
  • Push it again, OFF. Contact Configuration: 1NO.
  • Provide 2 ways for wiring. 1. LED Light Always On. 2. Push the Button, Led On..
  • High quality metal material & IP65 waterproof protection can be used in wet or dusty enviroment..
Check Stock

EG STARTS 1 Player LED Arcade DIY Part Kit USB Encoder to PC Gamepads Ellipse & Oval Style Bat Joystick + 5V LED Arcade Buttons for Video Games Mame Raspberry Pi Arcade1up Chrome Mix Colors

  • Quality: Excellent Control USB Encoder. High Quality 8 way joystick. LED Buttons Good lighting effects..
  • Fonction: DC 5V Arcade Illuminated Pushbutton, 8 ways Joystick Use Microswitch with gilded contact leg, excellent electronic performance, long life,....
  • Made with highest quality materials! Heat resistant plastic! Environmentally friendly metal!.
  • Package: 175 x 95 x 115mm. Each button and joystick are individually packaged.
  • Support: Perfect LED Kit for Windows Arcade Games PC Games DIY Project Arcade Raspberry Pi for RetroPie system MAME.
Check Stock

UltraPro 36 inch Hardwired Under Cabinet Lights, 3 Color Settings - 2700K/4000K/5000K - Warm White, Cool White, and Daylight & Broan-NuTone Builder Chimes Kit with Lighted Pushbutton, 1, White

  • Product 1: White Select Bright Select – Compatibility with in-wall LED dimmer gives user control over brightness while you can select which white color you want: 2700K soft.
  • 5000K daylight to ensure aesthetically appealing appearance.
  • Product 1: Easy Installation – Includes mounting hardware for direct-wire installation while push-in connectors allow fast and easy hardwired install.
  • Product 1: Worry-Free – Limited-lifetime offers peace of mind.
  • Product 1: LED Lights – Long-life, energy-efficient LED technology eliminates need for replacement bulbs.
  • Product 2: PUSHBUTTON DOORBELL: Sold in multiples to support housing projects, this chime is the perfect complement to the high quality materials today's consumers expect.
  • Product 2: CLASSIC STYLE: Basic white textured cover for a design that blends with builder finishing techniques.
  • Product 2: COMPLETE PACKAGE: Lit rectangular shaped pushbutton with non-stick action included so you have one less thing to buy and the convenience of a complete package.
  • Product 2: TWO TONES: Includes a two-note chime for the front door and a one-note chime for the back/second door for easy differentiation.
Check Stock