ReviewsMetal Screw

Dining Chairs Set of 4, Modern Living Room Natural Beech Chairswith ABS backrest,Kitchen/Bedroom/Lounge Chair, (White)

SEAT:The material of the seat is PP. PP plastic is a common industrial raw material with excellent mechanical properties, non-toxic and tasteless, good heat resistance, and is often used in furniture manufacturing..
LEG:The leg is solid beech wood ,It is very Tenacity , and use Environmentally-friendly paint.SCREW: The screw we use is Antiskid screw,and the local market all use Smooth screw, ours will more stable , and screw will not loose after long time use.
ADVANTAGE：1.The metal structure is solid metal , and the thickness in the local market all use 5 mm , and our factory use 7mm , it is more strong . 2.Ergonomically shaped & comfortable curved seating, designed to provide support for your back,perfect height and radian will provide a comfortable chair for you.
ASSEMBLE：It is very easy to assemble , the whole installation only need 4 screw At the same time, we also provide an installation instruction, so you only need to spend 2-3 minutes to complete it..
This eames dining chair is great for both Home and Office use - Living Rooms, Dining Rooms, Bedrooms, Nurseries, Offices, Waiting Areas, Banquets, and many more.

Check Stock

Prime-Line H 3962 Universal, Diecast, White, Folding Crank Handle for Casement Windows

Note: the metal, universal insert is being replaced by a selection of plastic adapters – this should allow for a more secure fit in some cases.
Constructed of steel and comes in a white finish.
Align the adapter with the set screw on the handle and pass the screw through the hole and set directly on metal spindle shaft.

Check Stock

SNUG Fasteners (SNG64) 100 Qty #10 x 1 Zinc Hex Washer Head TEK Self Drilling Sheet Metal Screws, Count

For use in steel, sheet metal, and attaches metal or steel to metal or sheet metal steel..
Material: High Quality 410 Stainless Steel, great strength and good corrosion resistance to make fasteners last!.

Check Stock

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

#12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
#12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.

Check Stock

#12x1-1/2' Metal to Metal Type #5 (Galvanized/ZINC) Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

#12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
#12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".

Check Stock

Metal Roofing Screws 1000 10 x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

#10 Sheet Metal ROOFING SCREWS. Our metal roofing screws are galvanized for corrosion resistance..
1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.

Check Stock

digitharbor® Video Door Scope Viewer Build-in 600mAh Lithium Battery+cyclic Storage Digital Peephole viewer Door Camera Door Open Chime 2.4 inches Color 320x420p LCD Screen 0.3MP 90degrees View

please be advised, you have to drill a hole on your front door before installation.it is not wireless, and do not support external memory card..
Step 1: According to the door thickness to choose a suitable screw, then turn the screw into the screw hole on the barrel of outdoor unit..
Step 2: Insert the barrel together with the FPC through the door peephole, then hold the outdoor part on door in right direction..
Step 3: Take out the metal bracket (the "UP" arrow on the bracket means upward), the FPC pass through the rectangular hole, the screw pass through the round hole of the metal bracket, then to lock the metal bracket with outdoor part tightly..
Step 4: Connect the FPC from outdoor unit to the connector of the indoor unit in right direction.Step 5: The four slots on the back of indoor unit is aligned with four hooks on the metal bracket and buckle up, then pull down indoor unit to lock tightly. Done!.

Check Stock

Karcy Expansion Bolt M6 Stainless Steel Expansion Bolts M6x60mm Silver Pack of 12

★Product features: The screw set is made of high-quality metal, with high strength, good corrosion resistance and high humidity in harsh environments such as high temperature and cold weather. The plastic anchor is made of sturdy and durable materials, and the triangle principle is more stable, not easy to break, rust and corrode. Anti-aging, good toughness, easy to remove. The unique appearance and use design make it more convenient and durable..
★ Application: Widely used in the installation and fixation of lightweight hollow bricks, gypsum board, curtains, lamps, cross-stitch, photo frames, TV cabinets, decorations, artworks, etc. Ribbed nylon expansion pipe needs to drill 8-10mm, the thickness of the plate is about 10-15mm. The screw is fixed on the wall.
when tightening the screw, the plastic anchor will expand, increasing the fixing force, and will not follow the screw when the drill bit rotates, thus having better stability..
★Product size: The length of the expansion tube is 30mm, the outer diameter is 8mm, and the inner diameter is 3.8mm. The screw size is M3.5 * 53mm, and the recommended opening size is 10mm, which is suitable for 8-15mm thick plates..
★ Product material: Quality plastic+metal.
★ Packing: 50pcs Aircraft type expa....

Check Stock

ANUIMOAR 20 PCS Screw Hooks for Hanging Outdoor String Lights Ceiling Hooks for Hanging Plants, Christmas Lights, Wind Chimes Decoration Q-Hanger Hooks with Safety Buckle, Black

Oil Rubbed Bronze Finish Screw cup hooks hanging hooks,These L shape hooks not rust, not corrosion..
Feature:Screw Hooks Antique Brass Plated material, does not stain or corrode, firm rust-resist metal made. The ancient bronze retro colours are very popular and a good match for hanging Lepetitchose..
SIZE : Total length 1.8inch(46mm) ,hooks length can fit hang many things..
Easy to install : With threaded end tapping screw, you can easily screw the metal cup hook into wood, wall, ceiling. Using a pilot hole first and screwing by hand or using a screw eye in your drill..
Prompt:These items contain functional sharp points, please keep it out of the reach of children and baby..

Check Stock

Metal Flipper Nut, Warehouse Rack & Gondola Shelving, Add Signs to Slot, 100 Pack

Use this clever flipper nut to mount sign holders, aisle signs, aisle violators and displays directly to the shelf slots in gondola shelving and pallet rack uprights. Can be used with both retail gondolas and warehouse racks to attach signage..
Insert the flipper or metal tab into the teardrop hole on the warehouse rack upright or into the shelf slot on gondola shelving uprights. Attach your signage or display and tighten the screw. As the flipper rotates it will catch the interior wall of the rack upright or the gondola shelf upright. When it hits the internal wall the flipper stops spinning and allows you to tighten the screw all the way..
Flipper nut is a 1/4" - 20 x 1.25"L threaded screw with a metal flange nut that fits into the teardrop or slot holes on most warehouse rack and pallet rack uprights. It will also work on most gondola shelving slotted uprights. It is used primarily to attach sign holders or retail displays to the upright of the rack..
Great for use by retailers to add cross merchandising displays, clip strips or other sign holders or by operations managers in factories and distribution centers to add warehouse rack label holders, warehouse aisle signs, location signs and inventory control signs..
Flipper nut is 100% steel metal constr....

Check Stock

Eyes Wide Shut

Can be used to fix worn and stripped screw holes.
For use in wooden, metal, plastic items into cement, aluminum or anywhere screw holes need fixing.
Just cut strip to size needed, fit lengthwise into hole, insert screw and tighten.

Check Stock