ReviewsMetal Stamping Block And Hammer

BENECREAT 6' Long Iron Jewelry Making Hammer with Wood Handle and Black Rubber Bench Block for Jewelry Making and Metal Smiting

  • 【Size Reference】: mini jewelry iron hammer is 6" long, black rubber bench block is 3x3x0.6", great for stamping.
  • 【Embedded Workmanship】: Hammerhead is embedded into the handle with a strong connection, can be used for a long time.
  • 【Ergonimic Wood Handle】: Wood handle is non-slip and environmental, easy handling and precision striking, provides better using experience.
  • 【Bench Block】: Great for absorbing the shock from striking the steel block, very easy to use with the hammer.
  • 【Wide Usage】: This hammer is great for both of beginner and skilled crafters, works for stamping and other handmade job.
Check Stock

Bastex 1 Pound Brass Metal Stamping Hammer. Short Handle Design with Flat Mallet Head for Jewelry Making and Personalizing.

  • GENERAL USAGE: The Brass 1 pound metal stamping hammer was designed for metal stamping. It has a smaller and scaled down grip designed for easy handling and precision striking. The 1 pound head and grooved grip helps to strike your metal stamps with the exact amount of force every single time. This hammer is great for the beginner and intermediate stamper. Also works great for flattening wire for jewelry making.
  • QUALITY: The brass head helps to prolong the life of your metal stamps by reducing wear and tear through each jewelry or customizing job. Sturdy and grooved grip allows for maximum and precise strikes. The head is firmly attached to the handle. Please note that brass hammers may flake when striking however this lengthens the life of the stamp by taking the brunt of the hammer blow..
  • PRECISION: Because of it’s scaled down grip and 1 pound brass head every strike will be more accurate resulting in a much better craft and customization of your jewelry or leather workings. Helps to prevent double impressions and protects the longevity of your stamps. Brass is much better than steel for metal stamping because it disperses the energy of the hit into the stamping blank..
  • SIZE & DIMENSIONS: Hammer head is about 1 pound in weight and grip is ab....
Check Stock

ImpressArt 3mm Metal Stamping Kit with Hammer, Steel Block, Stamp Straight Tape - Newsprint Lowercase

  • This ImpressArt Newsprint Lowercase metal stamping kit includes all the essential tools for hand stamping metal jewelry and crafts..
  • The one pound head Hammer provides optimal weight to leave deep, crisp impressions on your jewelry and crafts..
  • The steel block provides a solid surface and is conveniently sized to take up little workbench space..
  • Stamp Straight Tape allows precise accuracy when stamping letters on metal jewelry. Simply create a straight line with the top edge of the tape along your workpiece to create a guide. Lightly place stamp on disc and drag it towards the edge of the tape until you feel the bottom of the stamp catch the edge. Now all of your stamps will line up perfectly. To help evenly space out your letters, mark your Stamp Straight Tape with a pen where each letter will be stamped..
  • The Newsprint metal letter stamps are labeled on the side for easy identification. The stamp set includes 7 bonus stamps: "?" "!" "," "*" "-" "(" and check mark. Each stamp has a 2-1/2 inch long shaft that is clearly labeled on one edge. The actual stamped impressions are 3mm tall, each letter set comes in ImpressArt's sleek storage case. The case features labeled slots for each stamp to keep them organized and for easy access..
Check Stock

ImpressArt - Metal Stamping Kit, Includes All Essential Metal Stamping Tools for Jewelry Making and DIY Hand Stamping Custom Made Projects (Bridgette, Deluxe Kit)

  • This budget-friendly kit includes the essential tools needed to start hand stamping metal jewelry and keepsakes. The stamps and tools are all specifically chosen to ensure an easy and successful introductory experience..
  • The Soft Steel Hammer is designed to leave deep and even impressions, while the conveniently sized stamping block provides a solid stamping surface..
  • Bridgette Basic Deluxe Metal Stamps (Uppercase, Lowercase & Numbers) 3mm - Perfect, economical option when learning how-to hand stamp. Forged in carbon tool steel and hardened to last. Lightly coated with oil to prevent rust. Contain no character marking to assist with identification or orientation!.
  • The kit also includes 4 keychain projects, a practice blank, stamp guides, and a stamp enamel sample..
  • The stamps and tools are all specifically chosen to ensure an easy and successful introductory experience..
Check Stock

Brass Metal Stamping Hammer For Jewelry Making (2 Pound)

  • FEATURES: Solid Brass Head with Flat and Domed Ends.
  • Rubber Coated Short Handle for Easy Grip and Accurate Strike..
  • MEASUREMENTS: Head 2 1/2in Long, Diameter 1 1/2in, Overall Length 10 Inch..
  • The Professional Hammer Specially Designed for Metal Stamping..
  • Brass Metal Stamping Hammer Overall Weight 2 LB..
Check Stock

ABN Metal 1/4in & 1/8in Stamping 72-Piece Tool Kit – Alphabet Numbers Symbols Steel Embossing & Engraving Stamp Set

  • JEWELRY GETS YOUR STAMP OF APPROVAL: Make pieces that are truly your own — because only you can rock your own style best! Each necklace, keychain,....
  • LEARN THE CRAFT OF HAND-STAMPING: Use the easy-to-follow instructions to learn the art of metal stamping as you use the premium tools to create....
  • GIFT-WORTHY ACCESSORIES: The jewelry you make is so unique, it makes amazing gifts for friends and family members. They’ll love the personalized....
  • HANDMADE FROM THE HEART: Feel like a pro when you create 8 pieces with special meaning behind them. Play around with words and phrases to go with....
  • SET INCLUDES: 1 Set of Metal Letter Stamps (27 English Alphabet + Ampersand), 1 Hammer, 1 Steel Bench Block with Rubber Feet, 1 Pair of Mini Chain....
Check Stock

ImpressArt - Metal Stamping Kit, Tools & Supplies for Metal Hand Stamping Craft Projects, DIY Jewelry Making & Keepsakes (Homeroom, Deluxe Kit)

  • This kit includes all the essential tools ImpressArt recommends to start hand stamping metal jewelry and keepsakes. The stamps, tools, and guides are all specifically chosen to ensure an easy and successful introductory experience..
  • The Ergo-Angle Hammer is designed to leave deep and even impressions, while the large steel block provides a solid, comfortable stamping surface..
  • Homeroom Signature Letter Stamps, Uppercase, 3mm - Forged from hardened steel and rated to endure stamping on soft and hard metals up to Stainless Steel*. Lightly coated with oil to prevent rust. Character marked on side of the stamp for easy identification & orientation. Storage case with labeled slots for each stamp. Includes full uppercase and number, plus 7 bonus design stamps..
  • The kit comes complete with Stamp Tape and Stamp Guides to align letters, Enamel Marker to make stamped impressions stand out, 4 keychain projects, a practice blank, and a convenient storage box to store all your hand stamping tools and supplies..
  • Essential Bracelet Kit includes bracelet blanks and all the essential tools need....
Check Stock

ImpressArt - Ultimate Metal Stamping & Bracelet Making Kit, Tools & Supplies for Metal Hand Stamping Craft Projects, DIY Jewelry Making & Keepsakes

  • This kit includes all the essential tools ImpressArt recommends to start hand stamping metal jewelry and keepsakes. The stamps, tools, and guides are all specifically chosen to ensure an easy and successful introductory experience..
  • The Ergo-Angle Hammer is designed to leave deep and even impressions, while the large steel block provides a solid, comfortable stamping surface..
  • Bridgette Signature Letter Stamps, Uppercase, Lowercase, and Numbers 3mm - Forged from hardened steel and rated to endure stamping on soft and hard metals up to Stainless Steel*. Lightly coated with oil to prevent rust. Character marked on side of the stamp for easy identification & orientation. Storage case with labeled slots for each stamp. Includes full uppercase alphabet and 7 bonus design stamps..
  • The kit comes complete with Stamp Tape and Stamp Guides to align letters, Enamel Marker to make stamped impressions stand out, 4 keychain projects, a practice blank, and a convenient storage box to store all your hand stamping tools and supplies..
  • Essential Bracelet Kit includes bracelet blanks and all the ....
Check Stock

Engraving Marking Machine, Portable Handheld Dot Peen Marking Machine, High Speed Metal Pin Stamping tool for Vehicle Parts Marking/Chassis/Metal Parts Engraving 120W

  • This kit includes all the essential tools ImpressArt recommends to start hand stamping metal jewelry and keepsakes. The stamps, tools, and guides are all specifically chosen to ensure an easy and successful introductory experience..
  • The Ergo-Angle Hammer is designed to leave deep and even impressions, while the large steel block provides a solid, comfortable stamping surface..
  • Bridgette Signature Letter Stamps, Uppercase, Lowercase, and Numbers 3mm - Forged from hardened steel and rated to endure stamping on soft and hard metals up to Stainless Steel*. Lightly coated with oil to prevent rust. Character marked on side of the stamp for easy identification & orientation. Storage case with labeled slots for each stamp. Includes full uppercase alphabet and 7 bonus design stamps..
  • The kit comes complete with Stamp Tape and Stamp Guides to align letters, Enamel Marker to make stamped impressions stand out, 4 keychain projects, a practice blank, and a convenient storage box to store all your hand stamping tools and supplies..
  • Essential Bracelet Kit includes bracelet blanks and all the ....
Check Stock

1 Pound Metal Stamping Hammer for Jewelry Making, Geodes, Crafts, Forming Tools (6 Inch)

  • Jewelry Hammer: This 1 pound metal stamp hammer is designed with a grooved grip that helps provide the right amount of force for making jewelry, metal shaping, or working with leather.
  • Dual-Sided: The double-sided craft hammer will evenly disperse energy while providing maximum force and precision while completing a woodworking or construction project.
  • Reliable Quality: The jewelers hammer weighs approximately 1 pound with an ergonomic grip for additional comfort.
  • Dimensions: The mini stamping hammer measures 6.3 x 4 x 1.25 inches.
  • perfectly sized to fit inside a drawer, toolbox, or on a tool belt.
  • Comes With: You will receive 1 black and yellow chasing hammer for jewelry making, breaking geodes, crafts, and home improvement projects.
Check Stock

OWDEN Jewelry Metal Stamps Hammer,Steel Hammer,Brass Hammer,Nylon Hammer for Family Craft Working Jewelry Stamping Hammer Leather Tool

  • OWDEN New design 3 in 1 metal stamping hammer, There are 3 material heads design for different craft working. The hammer is wrapped in ABS plastic, And the handle is wrapped in soft plastic to reduce the shock force when struck..
  • The steel head: The steel head part is fixed on the hammer,Chrome plated, And the hardness about HRC48-52. It can meet the use of the family..
  • The brass head: The brass head is screwed on the hammer body by the thread structure. And designed to prevent the unscrew after every hit. the brass head is softer than steel stamps, the brass head will dent when stamping. This is the correct result. In order to prevent the stamp from jumping during use,ghosting of the letters..
  • The nylon head: We cleverly placed the nylon head at the end of the handle,So it is not easy to lose the hammer head! When using, You can unscrew the brass head and replace it with a nylon head. The nylon material has good toughness and durability,It can be used when striking many precision tools to protect the tools intact..
  • This is a multifunctional hammer designed by OWDEN(Patented, Don't copy us) ! You can basically use it in any hand-made process. Both brass head and nylon head will be scrapped with long-times use, So you can find replacement hammer heads in ....
Check Stock