ReviewsMetal Tube Flow Meter

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
⑥ max temp of tested liquid: 158°F/70°C.
MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..

Check Stock

RX WELD Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.It also comes with a standard 1/4" barbed fitting.
5.DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more precise gas metering..

Check Stock

BTMETER BT-866A Pro Handheld HVAC Anemometer for CFM Air Flow, Wind Speed Meter Gauge Measures Wind Velocity Temp %RH Dew Point with USB Sync to PC

★【High Accurate HVAC CFM Meter】Measures high Wind Velocity range 0.3~40 m/s, +/- 2.0% + 50, display in 6 units: m/s, km/h, ft/min, knots, mph, fpm.
Wind Temp Range 14°F～140°F, +/- 2.7 °F display in 2 units ℃℉(Celsius,Fahrenheit).
★【USB Data Logging】With a metal screw hole in the bottom so you can mount it on a tripod for hands-free operation. Support to connect the wind meter to computer via USB port, for monitor and record wind speeds, temperature, CFM air flow and RH, perfect for balancing air flow in HVAC tasks such as: duct vents, AC air output testing.
★【Portable Anemometer】 It’s a handheld pocket size wind speed indicator comes with protective case, Large Backlit screen, Low battery indicator and auto shut down to save the battery. Portable for indoor and outdoor wind measurements,such as: Long range shooting,Boat Sailing, Kite flying, Climbing, Drone driving,Vent, turbine air flow testing etc..
★【Tips for Wind Temp %RH Testing 】 The temperature sensors are inside the left and right holes, to shade them from sunlight to assure the wind reading are for the air flowing through the holes. So without air flow, the temp and %RH reading WON’T change rapidly, they’ll change s....

Check Stock

Argon Regulator Dual Co2 Flowmeter by Manatee for TIG MIG Welder Gas and backpurge 60 SFCH - CGA 580 inlet connection and 5/8 x 18RH outlet fitting - Accurate Gas Metering Delivery System

✔ WHETHER YOU ARE a welding beginner or a seasoned professional, you will surely enjoy using the Argon Regulator Dual Flowmeter! Perfect for hooking....
✔ COMPATIBLE with a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG TIG Welding Argon....
✔ DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more....
✔ HAS CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 60 CFH and has....
✔ Welders around the nation agree that the Argon Flow Meter Regulator is key to accurate gas meter readings..

Check Stock

AlphaWorks Double Diaphragm Transfer Pump 1/2" Nitrile/NBR/Buna-N - 12GPM / 45LPM Heavy Duty Aluminum Air Operated Pneumatic Use for Diesel, Kerosene & Oil

Flow Rate of up to 7.1 Gallons with the Included 110V DC Plug-In Adapter, Plug-In Pump, Flip the Switch and Squeeze the Trigger to being the Flow.
Compatible with Engine oil, Hydraulic fluid, DEF, Diesel, Kerosene, Washer Fluid, Antifreeze, Non-Potable Water and more.
Discharge Hose Length of 6.6 ft with Flow Control Nozzle / Adjustable Intake Tube Reaches from 2.8 ft to 4.1 ft to fit 55 Gallon Drums to IBC Totes.
Digital Oil Meter - 35L Flow Rate of Low Viscosity Fluids.
Backed by a 1 Years Limited Manufacturer Warranty on Defects / Do Not Use with Chlorinated Acids or Drinking Water.

Check Stock

Presonus StudioChannel Studio Channel Recording Vacuum Tube Mic Preamp Strip

Lifetime Customer Service by Presonus product Experts. Guaranteed legitimate and authentic merchandise. Class A vacuum tube microphone / instrument preamplifier. Tube gain and tube drive.
Variable VCA compressor (threshold, ratio, attack, release, make up gain, auto, soft). Three-band parametric EQ. Precision analog VU meter for gain reduction and output. EQ Pre/Post compressor switch.
80Hz high pass filter. 20dB pad. Phase invert. Rugged metal chassis. High headroom. Ultra low noise design.

Check Stock

Bestarc Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Argon Gas Welding AGR-2

Argon / CO2 regulator and flow meter, suitable for most argon tanks, argon hose for Miller, Lincoln, Hobart, HTP, and most other welders.
The material of body is quality brass. Sturdy and durable.
Easy to use, gas regulator can be directly screwed into argon or argon / CO2 tank, ideal choice for MIG TIG welding, chemical and electronics industry.
Accurate to read, pressure gauge reads from 0 - 3500 PSI, and the square flow tube reads from 0-25 CFH.
We provide high quality products at fair price, one year warranty, professional after-sales service.

Check Stock

Bigbong 10cc Liquid Dispenser Paints Solder Paste Silicone Sealant Adhesive Glue Syringe Dispensing Needle Syringe Barrel Adapter

HIGH QUALITY EPOXY MIXING NOZZLE: Made from premium PE thermoplastic resin material, non-toxic, odorless and insoluble in common solvents, low water absorption and good electrical insulation.
SMOOTHLY MIXING: Epoxy mixing tubes features 17 Cascades and 4 inch length. The liquid from AB plastic tube into the mixing tube in tube flow do cutting restructuring movement, internal spiral design simplify the mixing process, can make glue mixing more evenly.
EXPOXY TUBES STATIC MIXER SIZE: Inner Diameter: 0.2 inch (5.4mm). Outer Diameter: 0.3 inch (7.6mm). Length: 4.1inch (103mm). Element Number: 17..
DISPOSABLE STATIC MIXER: The motionless mix tube is designed for adhesive mixing, meter mix machines, concrete repair, carbon fiber applications, gasketing, and potting. We recommend a mixing ratio of 1:1 or 2:1 to guarantee a complete mix for epoxies, composites, polyurethanes, silicones, and methyl methacrylates.
WIDE APPLICATION: This lightweight and portable applicator is suitable for the mixing of two liquid materials with large differences in viscosity, and it fits for use with 50mL Cartridges/Duo-Pak Epoxy Cartridges.

Check Stock

SH Scientific 1200℃ Tube Furnace SH-FU-50STG (50mm(2\) diameter/300mm(11.8\) hot Zone) for Material Science & Engineering. Thin Film Growth. Chemical Vapor Deposition. Programmable Controller. 220V

High temperature tube furnace with hinged door. Max temp 1200℃ and recommended ideal running temp below 1000℃.
Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments. Control ramp up rate.
For material scientist, college and university labs PhD and Postdoc, engineer in aircraft/space/marine and defense.
300mm(11.8") hot zone. 50mm(2") tube diameter. Dimension 500x360x520mm, net 27kg, 2kW heater, 220V, 9A.
Tube furnace with gas flow meter system bundled with vacuum pump and chiller (option).

Check Stock

testo 420 I Balometer Kit with airflow capture hood for large air supplies and returns and swirl outlets I With Bluetooth and optional NIST certification

Versatile: The testo 420 balometer flow hood provides reliable data for air velocity, volume flow, absolute and differential pressure, air....
Efficient: The unique CEC approved flow straightener converts the turbulent air into a virtually uniform airflow, achieving particularly accurate data....
Easy operation: Thanks to the lightweight design, ergonomic handles and tiltable display, the durable air velocity meter offers a convenient....
MeasureQuick App: Follow all measurements remotely via Bluetooth from a smartphone or tablet. Send results directly from the job site for a more....
Portable: Equipped with a removable control unit, the HVAC tool set can be combined with an optional pitot tube and connection hose to enable....

Check Stock

Vividia D3160 USB Digital 180 Degree One-Way Articulating Borescope with 5.9mm Diameter 1 Meter Long Camera Probe

Vividia D3160 USB Digital One-Way Articulating Borescope has 5.9mm diameter camera probe and 1 meter long insertion tube (one-way articulation, 5.9mm diameter and 1 meter long, USB borescopes endoscope)..
D3160 can only be bent in one direction, and the maximum bending angle is 180 degree..
The insertion tube has metal braided outside layers and the bending part is also made with stainless steel, which offers good abrasion resistance..
With USB connection, one can connect Vividia D3160 Digital Borescope to a Windows PC (WIndows XP, 7, 8 and 10), MacBook, some android devices (phone or tablet) directly..
End users can easily take pictures and videos with free software or app. The LED brightness can be adjusted..

Check Stock