ReviewsMetal Tube Flowmeter

Reboot Argon Gas Regulator Flowmeter 0-25lpm CGA-580 for TIG Welder Machine Full Copper Gas Values Welding Accessory for Tig Welding machine

Argon regulator is designed for Professional TIG/MIG Welding Applications..
CGA-580 Connection for argon and argon, CO2, and helium blend bottles..
The output flow is adjustable from 0- to 25 lpm. And is indicated by a ball which moves up and down in the flow tube..
The material of body is full copper. Great for Miller, Lincoln, Hobart, HTP, and most other welders!.
This flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators..

Check Stock

Adamas-Beta LZQ-4 Flowmeter Gas Oxygen Flow Meter Nitrogen Flowmeter 1-10LPM

The gas flowmeter is made of high quality material, it is transparent and can hold up to 0.6MPa pressure..
Beautiful look,low weight,unbreakable and long life..
Used to measure single-phase non-pulsating gas flow,easy to use and lasting performance..
Mainly used for detecting the oxygen, nitrogen flow, control gas flow and can be used in industry, flowmeter interface is connected by thread....

Check Stock

uxcell A11120300ux0019 1/2 Inch Female Thread 0.2-2.0 GPM 1-7 LPM Water Liquid Inline Flowmeter LZM-15

Material : Acrylic, Stainless Steel, Plastic.
Overall Size : 32 x 210mm / 1.3" x 8.3" (D*H).

Check Stock

Zistel CO2 Argon Regulator with Gas Hose TIG Welder

Argon/CO2 Regulator For Welding: Zistel Argon Regulator is a ideal choice for professional TIG/MIG welding applications, which can be used to reduce and control pressure levels..
Argon Flowmeter With Pressue Gauge: Our argon flowmeter is equipped with pressure gauge, allowing you to view how much gas is left in the tank range 0 to 3500psi..
CGA580 Inlet Connection: Zistel pressure regulator is suitable for standard Argon /O2/N2 Tanks with CGA-580 Inlet Connection. You can connect the welding hose via female 5/8UNF-18RH fitting..
Hose Included: Zistel 10Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects..
Field of Application: Idea choice for welding, cutting ,chemical and electronics industry.

Check Stock

26FV Series - 200 Amp - Air Cooled - Flexible Head TIG Torch with Valve - 12.5 feet 2-Piece Cable - Dinse 35-70 Connector

200 Amp fully assembled 26V Series TIG Torch, designed for welders with Dinse or Stud Connectors or with separate TIG Module or TIG Box..
Choose between 5/16" Terminal, LC-40 cable connectors or Dinse Style Connectors, (Please check Picture #2 for dimensions and characteristics).
Available with 12.5 or 25 feet Cable and Straight or Flexible Head. Torch head with valve for a manual closure of argon flow..
2 Pieces, gas hose is separate from power cable for independent connection with welder gas outlet or directly to the argon flowmeter..
Accessory Kit and Heavy-Duty Nylon Cable Cover are Included. Other accessories might be needed to connect the argon line to your welder or flowmeter.....

Check Stock

G3/4\ Thread Hall Effect Liquid Water Flow Sensor Switch, DN20mm Counter Meter Used for Water Heaters, Water Dispenser, Water Purifier, Coffee Maker 2-45L/Min

Measurement Range: According to strict regulations, the measurement range of the flow switch is 60 (cubic meters/hour), which is large enough to meet daily needs..
Durable: The water flow sensor switch is made of high-quality brass material, which is durable and has a long service life..
Quality Assurance: This flowmeter has undergone strict quality control and testing, and the quality is guaranteed. Safe and reliable..
Practical: High-quality water flow meters can maintain high performance for a long time, and are convenient to use in real life and have strong practicability..
Wide Application: The flowmeter can be widely used in industrial automation, mechanical equipment, air compression industry, refrigeration, heating and ventilation and other fields..

Check Stock

CNYST Ultrasonic Flow Meter Liquid Flowmeter TUF-2000H with 3 Size Transducer for Pipe Diameter DN25 to 6000mm LCD Display Max Liquid Temperature 90 Degrees Celsius

◆ TUF-2000H hand-held ultrasonic flowmeter using external clamp type sensor measuring liquid flow. Installation process is very simple, more easy to operate. Especially suitable for flow balance test and flow monitoring..
◆ High Accuracy measuring: Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%.
◆ Non-intrusive measuring: Non-intrusive, clamp-on transducer, no pressure drop, no pipe disturbance.
with 3 size Sensor TS-2/ TM-1/ TL-1 Range: DN25~6000mm.
◆ Large LCD display: Display: 4 line x 16 character LCD with backlight.
Display instantaneous flow, accumulated flow (positive, negative and net), velocity, working status etc..
◆ Principle: transit-time ultrasonic flowmeter.
Built-in data logger: Built-in 24K data logger, store over 2000 lines measuring data.

Check Stock

VTSYIQI Handheld Ultrasonic Flow Meter Flowmeters HS-HM for DN15mm to DN300mm Pipe Size for Liquids Temperature Range -30℃ to 90℃ with Clamp On Sensors Transducers LCD Display

with Standard small bracket size: 318*59*85mm.
◆High Accuracy measuring: Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%.
◆Principle: transit-time ultrasonic flowmeter.
Built-in data logger: Built-in 24K data logger, store over 2000 lines measuring data.
◆Large LCD display: Display: 4 line x 16 character LCD with backlight.
Display instantaneous flow, accumulated flow (positive, negative and net), velocity, working status etc..
◆ TUF-2000H hand-held ultrasonic flowmeter using external clamp type sensor measuring liquid flow. Installation process is very simple, more easy to operate. Especially suitable for flow balance test and flow monitoring..

Check Stock

ANCEL S3000 Smoke Machine Automotive, EVAP Smoke Machine Diagnostic Leak Tester, Dual-Mode Vacuum Fuel Pipe Leak Detector with Pressure Gauge&Adjustable Air Flowmeter for All Car/Motorcycle/Truck/Boat

... ANCEL S3000 automotive smoke machine has a hook for you to hanging on vehicle hoods, conveniently for leak diagnosis, also S3000 automotive smoke machine leak detector features a flow meter, which is easy to read, enable you to judge the size of a leak..
【Adjustable Air Flowmeter+ Viewable Pressure Gauge & Oil Level+Dual Test Modes】ANCEL S3000 automotive smoke machine leak detector equipped with pressure gauge helps you observing the change of the gauge value to find small leaks easily. Built-in air pump and smoke generator, does not rely on additional air pump machine, perfect for vehicle repair! Adjustable flowmeter help you controal the amount of smoke easily, viewable oil level let you know when to change oil timely..

Check Stock

SONNLER Argon/CO2 Regulator Flow Meter Compatible With 6.6FT GAS Hose Welding Gas Regulator For CGA-580 Mig Tig Welder Accessories

【Premium Quality Argon Regulator】SONNLER argon flow gauge regulator made of premium durable brass, can withstand harsh environments and has a longer life, won't rust, won't leak, improve your welding skills..
【Wide Application】Ideal for CGA 580 tank fitting, this gas pressure regulator/flowmeter can be used with argon, helium, and CO2 gas tanks (CGA-580 inlet). It's compatible with Miller, Lincoln, Hobart, and most other TIG welders, apply to welding,cutting, chemical, and electronics industries..
【Accurate& easy to read】Adjustable from 0 to 60 cfh (cubic feet per hour), this argon regulator's gas flow is indicated by a ball that moves up and down in the flow tube. The easy-to-read bottle pressure gauge shows how much gas is left in the tank (range 0 to 4000psi). It fits both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.It also comes with a standard 1/4" barbed fitting ..
【Two Connection Ways】You can choose the connection method according to your needs..
【7*24 after-sales service】You'll receive 1 x Argon/CO2 flow meter gas regulator, 1 x 6.6 ft hose, and a 30-day warranty. If there is a problem, please feel free to contact, we have professional engineers to provide support..

Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..

Check Stock