ReviewsMetal Tubing Clamps

Flexible PVC Pipe2' Dia Black PVC Pipe,2' x25 feet Pool Hose,Spa Hose Tubing for Koi Ponds, Pond Tubing,Irrigation and Water Gardens,With 2PCS Stainless Steel Clamps

【PREMIUM Flexible PVC Water Pipe】- Length: 25'，ID：2inch，OD：2.37inch，Thick: 3.5 mm The Flexible pool hose is constructed with Resists corrosion PVC to ensure quality and service life..
【Complete Accessories】-2-Inch25 Foot Black Pvc Pipe With 2PACK Stainless Steel Clamps.
【Safety and Sturdiness】-2 inch hose Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
outdoor, sunlight resistant, direct burial.
【Effortless Installation】-The pond tubing Fits is fast, and only one person can complete the work in a few minutes. With 2Pack Stainless Steel Clamps and does not require any tools..
【Wide Application】-2 inch Flexible Hose Works Great for Pools, Spas, , pumps, refrigeration equipment, Water Gardens and other applications.

Check Stock

ISPINNER 15pcs 1/2 Inch Stainless Steel PEX Cinch Clamps, Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections, Pack of 15

HIGH QUALITY MATERIAL - Made of 304 Stainless Steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties..
360-Degree SEAL PROTECTION - These interlocking rings form a complete 360- Degree watertight seal, provide reliable and fast connection of all PEX pipes fittings..
WIDE APPLICATION - Widely used in all plumbing system, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing etc..
EASY INSTALLATION - Slip these pex clamps over the tubing, then slip tubing onto insert fitting. Use the correct cinch tools to close the clamp ear until it is fully engaged. Providing a strong, leak-free and reliable crimp fitting connection..
SIZE - 1/2 inch PEX clamps, fit for 15.0-17.5mm outside diameter pipe. Width x Thickness of 1/2 inch clamp is 7.0 x 0.8mm..

Check Stock

Double Gripping Nylon Hose Clamps Snap Grip Nylon Plastic Hose Clamps 12.3-14mm 1/2inch 20pack

Low-pressure Nylon plastic Hose Clamps, Simply to clamp it to the end of the hose and then engage teeth initially by hands or tools..
Double Grip Design of Teeth for a More Secure Grip than Conventional Nylon Clamps..
Easy to install and reusable, These clamps can be removed by separating the clamping halves in a perpendicular direction at the seal.
-10C to 40C（-50F to 104F ）Long Term Operating Temp Range.
For use with 12.3-14mm ( 1/2inch ) OUTER DIAMETER Tubing/Hose. 20pack.

Check Stock

60 Pieces Drip Irrigation 1/4 Barbed Tubing End Plugs,Barbed Connectors End Cap for Drip or Sprinkler Systems

【Great Value】：Comes with 60 pieces barbed end plug fittings in total,enough to meet your daily use..
【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
【BARBED DESIGN】：drip irrigation plugs tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
【EASY TO INSTALL】:barbed hose end plug is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
【FOR WIDE APPLICATIONS】:closure goof hole plugs are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..

Check Stock

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..

Check Stock

50 Pcs Drip Irrigation Coupling Fittings 1/4 Drip Irrigation Tubing Straight Coupling/Single Barbed Connectors for Universal 1/4 Inch Irrigation Tubing

✔【High Quality】: Made of high-impact, high-strength plastic material, Durable, strong, water resistant.
✔【Fits 1/4 inch irrigation hose】: This irrigation straight coupling connectors connect two sections of any brand 1/4" drip irrigation tubing in a straight line. Two barbed ends makes the connection more strong and firm. Kindly Note:Please check the size carefully before purchasing..
✔【Easy to Install】: This coupling fittings for 1/4 inch irrigation tubing is easy to be installed without glue, tools, or clamps. Push the tubing firmly over the tee fitting.Tips:Put the tubing end into 75°~80° hot water for 30 seconds before pushing them..
✔【Wide Application】:This drip irrigation single barbed connector for 1/4 inch irrigation tubing helps to build a maintenance-free irrigation system, it is ideal to be applied for garden, greenhouse, flower bed, patio and other agricultural watering system..
✔【 Package Included】: 50 pieces of 1/4 inch barbed straight coupling fittings connectors are included in..

Check Stock

POWERTEC 70225 Right Hand Keyed Bridge Hose Clamps | 4” Easy Turn Thumb Screw Metal Clamp | Stainless Steel | 5-Pack

INCLUDES: Right Hand 3-3/4”~4-3/8” Bridge Hose Clamps with Keyed Thumb Screw – 5 pcs.
APPLICATION: Used for securing dust collection hoses, duct work, dryer vents, piping, pvc tubing and more.
SPIRAL DIRECTION: Features a right hand spiral design integrated with an easy turn thumb screw metal clamp allowing you to make quick adjustments without the use of tools.
QUALITY: Delivers a heavy duty, leak proof and corrosion resistant hose clamping tool constructed out of premium grade stainless steel.
CLAMPING CAPACITY: 3-3/4~4-3/8 inch (111mm).

Check Stock

Light Socket for Pelton & Crane for All LFII, LFIII, LFIIIS, & LFIIISE PCS607

Used on 1/4" OD tubing and 1/8" OD tubing.
Used to install 1/4" Sleeve clamps and Uni-clamp (RPI Part #ADC035) and 1/8" Uni-clamp (RPI Part #AD.
The tool provides 90 degrees angles on both ends for ease of use.
This Universal Sleeve Tool replaces obsolete Sleeve Tool (RPI Part #ADT078).

Check Stock

10PCS PBT Plastic Tubing Clamp 140 Degree Celsius Heat Resistant Adjustable Tube Clip Laboratory Industrial Flow Control Hose Clamp

Use for tube outer diameter 1/2''-3/4'' (12-18mm). And the tubes you use the clamp for must be flexible and the thickness of the tubes must be above 0.02 inch/0.5mm.
High Temperature Resistant Hose Clamps can be used at high temperature of not more than 140 degree Celsius: made from high quality heat resistant PBT plastic (polybutylene terephthalate),good elasticity, clamping force, and durable.
Tubing clamps are widely used in medical devices, laboratory instruments,chemical industry, beer brewing, wine making and etc..

Check Stock

mistcooling Outdoor Misting Fan System 18\ Fan - High Pressure (18\ - 2 Fans Black)

Base Fan Mist Kit Includes: 1 - 18'' High velocity 3 Speed Fan with 4 Nozzle Stainless Steel Ring 1- 1500PSI High Pressure Pump with Solenoid, Pressure Switch and Filtration 1- 25ft Roll of Flexible HP Tubing 1/4'' 4- Ultrafine, Anti-drip Brass/Stainless Steel Misting Nozzles - Stainless Steel Mounting Clamps and All necessary fittings for easy DIY installation..
- 110v AC (Available in 12vdc and 220v on request).
- Supports up to 8 Fans FAN Features: - UL 507 certified for outdoor use - High Velocity (Air throw up to 20 feet) - Corrosion resistant finish – 9ft pre-wired 3-prong plug for 120VAC - 6400 CFM, 1/10HP,.
1.4 Amps - Quiet operation - Totally enclosed, maintenance free high-performance motor with thermal overload protection - Stainless Steel 4 Nozzle Mist Ring, all kits come with Black color tubing (we also offer White and Grey Color Tubing) contact us if you wish to get a different color tubing..

Check Stock

JOYPRO 60 Pieces Drip Irrigation 1/4 Barbed Elbow Fittings Barbed Connectors for 1/4 Inch Irrigation Tubing Drip Line Elbow for Drip Sprinkler Garden Lawn Systems

【PERFECT MATCH 1/4 INCH IRRIGATION TUBING】JOYPRO 1/4 inch irrigation elbow fittings can connect to most of the standard 1/4" drip irrigation tubing. (Note: Please check the size of tubing carefully before purchasing.).
【MADE OF DURABLE PLASTIC MATERIAL】JORPRO drip line elbows are made of high quality engineering plastics, so our irrigation elbow connectors are durable, strong, water resistant, chemical-resistant and long-lasting than others..
【EASY TO INSTALL】It is easy to install without any glue, tools or clamps. Directly insert this irrigation tubing elbow at the ends of the water pipe, the barbed ends can grab 1/4" tubing tightly for a secure leak-proof connection..
【PACKAGE LIST】It comes with 60 pieces barbed elbow connectors, which let you connect your irrigation systems as you wish..
【WIDE APPLICATION】These elbow fittings for 1/4 inch sprinkler hose is ideal for garden, flower bed, greenhouse, farm, lawn, patio and other agricultural watering system..

Check Stock