ReviewsMetallic Processing Machine

Happybuy Manual Wire Stripping Machine 0.06-0.98 inches, Wire Stripper Machine with Hand Crank Portable, Wire Stripping Tool Aluminum Construction,for Scrap Copper Recycling

  • Hand Crank Designed: designed with hand cranks,easy to operate.Easily connects to drill for automatic wire stripping or use Handle for manual stripping.
  • Aluminum Alloy Material: Manual wire stripper with high quality lightweight construction made of durable aluminum alloy. The blades have been fully guarded to ensure complete safety.
  • Recycle Your Copper: Suitable for removing the plastic and rubber insulation from undamaged scrap wire.You can recycle your copper wire, benefit from non-insulated pure copper wire.
  • Easy to Use ,Portable & Energy Saving: There is adjustable blade and rollers on the cable wire stripping machine, smoothly and good for any shapes Cable. When you use this machine to strip the wire whose diameter smaller than 3mm, please put the wire to the small hole on bottom.
  • Wide Application: This machine is automatic and the wire range is up to 25mm,widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries.
Check Stock

YaeTek Electric Grain Grinder 500g Grain Grinder Machine High Speed Grain Grinder Mill 1600W Corn Herb Spice Powder Machine

  • Material: Stainless steel, good quality material makes the machine durable.
  • High power & grinding speed, makes the machine more efficient than the traditional motor models.
  • The grinder is suitable for dispensary, medicine processing factory and powder processing.
  • The machine adopts ultra high-speed motor, can quickly smash all kinds of dehydrated food, rice, corn, sesame, soybean, fish feed, pepper, medicine (such as ganoderma, licorice, tianqi, pearl etc).
Check Stock

Taidacent Non Contact Liquid Level Sensor Contactless Water Level Sensor Externally Attached Pipe Water Float Switch NPN Output Capacitive

  • The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container..
  • The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production..
  • The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected..
  • The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used..
  • NPN output: If there is induction, the output is low level.
Check Stock

【The Best Deal】OriGlam Mist Coolant Mist Lubrication, Spray System Unit Used for CNC Lathe Milling Drill Machine

  • √ Multi-function – Set multi function all in one,cooling,lubrication and blowing the metal chips, gas processing chips are blown away, working safer..
  • √ Great Value – Save 60-80% lubricants compared with the oldest lubrication tube..
  • √ Easy Operation – Engraving machine spray cooling,Special design,direction of rotation,easy to operate..
  • √ Long-term Use – Standard fixing device,fine spray port, long life. Cooling stone/metal/ceramic tile engraving machine..
  • √ Widely Used – Great for CNC Lathe Milling Drill Machine. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing..
Check Stock

Compact Wood Router Tool 110V Electric Hand Woodworking Trimmer Palm Router kit with Gloves 15 PCS Router Bits (800W)

  • 【High Quality】The hand-held woodworking trimmer is made of high-quality aluminum and plastic, with a built-in 800W powerful copper motor, and the motor speed is 30000rpm..
  • 【Accurate Scale & Transparent Base】The portable woodworking trimming machine has a scale for more precise processing. The transparent base can clearly observe the wood processing and prevent flying wood chips..
  • 【Easy to Operate】One-button toggle switch, simple and quick operation. Thicker model with low noise, straight line guide, processing more stable..
  • 【Comfortable Grip】The non-slip rubber handle makes it more comfortable to hold and reduces fatigue from long-term work.Comes with a pair of protective gloves to make the operation safer..
  • 【Application】It is suitable for chamfering, grooving, surface finishing, curve cutting, planing wood edge, pattern processing of wood, cabinet processing, handicraft production, plastic board, veneer and other materials..
Check Stock

QWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm

  • ⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
  • ⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
  • ⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • ⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.
Check Stock

Hand Wheel, 250x22mm Lathe Handwheel for Machine Tool

  • DURABLE MATERIALS: Made of 40Cr and carbon steel materials, with carburizing and quenching process, high hardness and strength..
  • INTEGRATED FORMING: The inside and outside of the tool holder are integrally formed, fine control processing, with stable performance..
  • HIGH ACCURACY: Inner hole grinding treatment, has high concentricity, suitable for high accuracy machine tool processing..
  • CLAMPING RANGE: The clamping range of the extension rod is 1‑7mm, standard in size, and it is suitable for ER11 collet..
  • WITH WRENCH: Equipped with a wrench, stable in processing, and can effective vibration suppression..
Check Stock

Taidacent Non Contact Liquid Level Sensor Contactless Water Tank Water Level Sensor for Tank Water Level Control with Low and High Level Output

  • The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container..
  • The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected..
  • The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used..
  • High and low level output: If there is induction, the output is high level.
  • no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection.
  • You can adjust sensitivity: Remove the plastic cover of the sensors and turn the very small screw, clockwise decrease sensitivity, counter clockwise to increase the sensitivity..
Check Stock

TECHTONGDA 600W Mill and Drill Brushless Motor Benchtop Drilling Milling Machine Variable Speed Mill 110V

  • ⚙Powerful function: This is a multi - functional drilling and milling machine, can complete drilling and milling operations. Also can be used for precision parts processing, sample processing and model..
  • ⚙Brushless motor: It USES a 600W brushless motor with strong power and easy maintenance..
  • ⚙All metal: It USES an integrated spindle and brass gear, which makes it not only precise but also durable..
  • ⚙Variable-Speed: Weather you need high speed or lower speed spindle operations this machine can handle it. Boasting a 50-2250 RPM spindle speed for the extreme precision your project needs..
  • ⚙Professional drill and mill: One machine for multiple purposes, iron plate, stainless steel plate, angle iron, wooden block, plank, etc. can be drilled and milled..
Check Stock

WDAA Children Adult Fencing Jacket, Fencing Protective Metal Clothing, Foil/Epee/Sabre Fencing Suit

  • Sturdy and durable with advanced processing technology and exquisite handicraft..
  • CE Standard Fencing metal Jacket lame for your daily practice and competition..
  • Special metallic fencing fabrics to ensure ware-resisting and comfortable when wearing..
  • Professional finishing with fine workmanship and skin-friendly fabric to protect you in every details..
  • Multiple sizes for both kids and adult fencer, please do refer to the size chart before buying..
Check Stock

WDAA Children Adult Fencing Jacket - Fencing Protective Metal Clothing, Foil/Epee/Sabre Fencing Suit

  • Sturdy and durable with advanced processing technology and exquisite handicraft..
  • CE Standard Fencing metal Jacket lame for your daily practice and competition..
  • Special metallic fencing fabrics to ensure ware-resisting and comfortable when wearing..
  • Professional finishing with fine workmanship and skin-friendly fabric to protect you in every details..
  • Multiple sizes for both kids and adult fencer, please do refer to the size chart before buying..
Check Stock