ReviewsMetalworking Micrometers

Mitutoyo 177-284 Setting Ring, 12mm Size, 10mm Width, 32mm Outside Diameter, +/-1.5Micrometer Accuracy

  • Actual inside diameter is marked on each ring.
  • It is used as an accessory for inside micrometers, hottest and dial bore gauge.
  • Used for quick zero adjustment of dial bore gauges, hottest, and inside micrometers.
  • Package Dimensions: 5.334 L x 0.762H x5.334W(centimeters).
Check Stock

Mitutoyo 177-125 Setting Ring, 8mm Size, 10mm Width, 32mm Outside Diameter, +/-1.5Micrometer Accuracy

  • Actual inside diameter is marked on each ring.
  • It is used as an accessory for inside micrometers, hottest and dial bore gauge.
  • Used for quick zero adjustment of dial bore gauges, hottest, and inside micrometers.
  • Package Dimensions: 5.334 L x 1.778H x5.588W(centimeters).
Check Stock

Micrometer Stand Cast Iron Base Rubber Lined Jaws 4.75” wide x 6.5” long x 4.5\ High MS-1

  • Will allow benchtop use of standard micrometers or other small hand tools.
  • Cast iron base is a generous 4.75” wide x 6.5” long..
  • Rubber lines jaws will protect measuring tools, are 1.5” wide, will open to .75” and will accept most inside and outside micrometers..
  • Jaws rotate 50 degrees forward and 30 degrees back..
Check Stock

Oreck Commercial 151803 Premier HEPA Backpack Vacuum Bag, 10 qt Capacity (Pack of 6 Bags)

  • For use with the Oreck Commercial OR1001 backpack vacuum cleaner (sold separately).
  • Meets U.S. Department of Energy Standard 3020 for HEPA filters.
  • Helps remove at least 99.97 percent of airborne particles that are 0.3 micrometers or greater in diameter.
Check Stock

Stainless Steel Calibration Block Rod Bar Professional Standard Caliper Outside Micrometer Calibration Rod for Calibrating Micrometers 100mm

  • 【A SCOPE OF APPLICATION】This calibration block is mainly used for calibrating micrometers..
  • 【HIGH PRECISION TOOLS】The stainless steel calibration bar is professional measuring tool, various specifications for your choice..
  • 【100%BRAND AND NEW】The stainless steel calibration bar is 100% high quality and brand new..
  • 【SOPHISTICATED CRAFTS】The stainless steel calibration bar is made of premium stainless steel, not easy to deform, durable in use..
Check Stock

Starrett End Measuring Rod with Insulated Handle and Spherical Ends for Comparing Gages and Measuring Parallel Surfaces - 1/4 Diameter 2 Length - 234A-2

  • Measure with Precision - The Starrett End Measuring Rods or Standards are for checking and setting micrometers of 2" capacity or larger and are also used on machine tools for comparing gages and checking precision measuring tools..
  • Firm Hold - The rubber handle provides insulation and a comfortable grip, making it easy to use for extended periods of time. Plus, the insulated handle helps minimize expansion by heat when held in the hand..
  • Multipurpose - These standards are the ones used for all micrometers furnished with standards. They are useful for measuring parallel surfaces and many other types of work..
  • Durable Construction - Made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. It is also available in larger sizes, so you can find the perfect fit for your needs..
  • The Standard for Excellence - Manufacturing quality tools that provide consistent and reliable performance since 1880, Starrett's commitment has earned them a reputation as one of the most trusted names in the industry..
Check Stock

POWERTEC 110680 4 x 36 Inch Sanding Belts | 80 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper – 10 Pack

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts – Ultra Fine Grits – 4 Pack Assortment

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts - Premium Ceramic - Coarse Grits - 6 Pack Assortment

  • Kit includes 1 each: P36, P40, P60, P80, P100, and P120 grit premium ceramic sanding belts (6 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty y-weight polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Unique properties of ceramic grain deliver outlast other types (zirconia, silicon carbide, aluminum oxide, etc.) | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

6-Inch Cross-Slide Drill Press Vise X-Y Compound Vise 2 Way Heavy Duty Cross Slide Vise Clamp Machine Metal Milling

  • Material - This X-Y compound vise made of heavy duty cast iron construction, Powerful serrated steel jaws.
  • Size - 6" wide machinist jaws ,Maximum jaws opening: 5.9" , Jaw depth 2.08 inch.
  • Vice Travel X: 5.5inch Vice Travel Y: 7.48inch.cold rolled steel....
  • Usage - uyoyous cross slide vise have swivel crank handles for adjusting vise front to back and left to right, bolt down slots for securing..
  • Function - Hinged vise crank handles drops out of the way, designed for woodworking and metalworking..
  • Wide Application - our heavy duty cross slide vise designed for woodworking and metalworking, widely used in milling machine, drill press and....
Check Stock

52-646-300-0 Cylinder Dial Bore Gage 2“-6 Measuring Range .0005 Graduation 9.5 Measuring Depth with Carbide Anvils and Insulated Grip

  • ...tion -- Professional Cylinder Dial Bore Gage great for hobby machinists as well as mechanics, it is commonly used to measure many kind of automotive’s parts or cylinders and easily check for ovality or out of roundness. It can measure the interior diameter of a hole at any depth (within its reach), while internal micrometers can only measure to the depth of their contacts..
  • Valuable Application -- Professional Cylinder Dial Bore Gage great for hobby machinists as well as mechanics, it is commonly used to measure many kind of automotive’s parts or cylinders and easily check for ovality or out of roundness. It can measure the interior diameter of a hole at any depth (within its reach), while internal micrometers can only measure to the depth of their contacts..
  • Technical Features -- Designed 2”-6” Measuring Range, 0.0005” Graduation, 9.5” Measuring Depth. Come with 2″ Contact Extension, 10 x Anvils (, 2.2", 2.4", 2.6", 2.8", 3", 3.2", 3.4", 3.6", 3.8", 4" ), 3 x different size Washers (0.1”, 0.05, 0.02”)Complete set -- The whole set include 1 x Dial Indicator, 1 x Chrome Plated Handle, 1 x Contact Extension, 3 x Washers, 10 x different size Anvils, all parts are collected in a fitted case.
  • Complete set -- The whole set include 1 x Dial I....
Check Stock