ReviewsMetalworking Vises

Anchor Wire Vise Anchor Vise Grape Trellis Anchor Vise for Tightening 8~11 Gauge Wire to Build Trellises, Vineyards, Fences and Arbors (5 Pieces)

  • Adequate Quantity: our anchor vises set includes 5 pieces of anchor wire vices, suitable for 8 to 11 gauge wire, enough to meet your working and replacement needs.
  • Aluminum Material: these anchor wire vices are made of aluminum material with long term applicable ability.
  • These anchor wire vices can effectively keep the wire from slipping out.
  • Tiny Size: the size of our wire vise measures approx. 6 x 3.2 x 3.2 cm/ 2.36 x 1.25 x 1.25 inches.
  • Each wire vise is approx. 30 grams in weight.
  • It is convenient for you to carry or store those tiny wire vises.
  • Choice of Wire: It is recommended to use the anchor wire vise with bare or galvanized wire, not with wire with other coatings.
  • For proper application of the wire vise, please pay attention to and follow our recommendations.
  • Applicable Scenarios: our 8 to 11 gauge wire vise can be applied to build trellises, vineyards, fences or trees, providing you with an optimized experience for your garden work.
Check Stock

POWERTEC 110680 4 x 36 Inch Sanding Belts | 80 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper – 10 Pack

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts – Ultra Fine Grits – 4 Pack Assortment

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts - Premium Ceramic - Coarse Grits - 6 Pack Assortment

  • Kit includes 1 each: P36, P40, P60, P80, P100, and P120 grit premium ceramic sanding belts (6 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty y-weight polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Unique properties of ceramic grain deliver outlast other types (zirconia, silicon carbide, aluminum oxide, etc.) | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Mophorn Woodworking Bench Vise 7 Inch,Heavy-Duty Steel and Cast Iron Structure Woodworking Front Vise,Easy-to-operate Workbench Vise,Durable Woodworking Vise for Home, Woodworking Studios

  • Iron Structure: All iron structure with paint coating, wear-resistance, corrosion and rust proof. At the same time it is very strong and resistant to use..
  • Convenient Design: This vise for quick sturdy mounting to your workbench. The 7-inch guide bar makes it easy to work and holds things more firmly..
  • Simple to Use: Simply pull up on the handle and hold, this will cause the vise nut to disengage. Adjust the jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product..
  • Long Life: The sturdy surface greatly reduces the wear rate, and the spray coating effectively relieves the oxidation reaction. The wood bench vise can be used for many years..
  • Wide Application: Professional grade woodworking vises are designed for home craftsman. These vises are built to exact specifications for optimal performance..
Check Stock

Deluxe Hardness Pick Set & Mineral ID Kit

  • This set includes 8 Mohs' Hardness Points from Mohs' 2 through Mohs' 9, nicely mounted in nickel-plated Brass, color-coded, number-stamped, and double-ended Pin Vises, along with two Hardness Plates of Mohs' 3.5 and 5.5, a Streak Plate, a Magnet, and a 100x Sharpening Stone, enhanced by Instructions, Table of Minerals sorted by Mohs' Hardness, all neatly packaged in a compact, Wooden Case..
  • To perform a scratch test, select a numbered Hardness point, and try to scratch a flat, smooth surface of the mineral. For example, if the number 6 point scratches your mineral, but the number 5 point does not, then your mineral has a Mohs' Hardness value of about 5.5. This is an important mineral identifying criteria..
  • The Hardness Points are made of Metals and Alloys of equivalent Mohs' Hardness as the mineral standards, so the points will not break off, and they can easily be r....
Check Stock

6-Inch Cross-Slide Drill Press Vise X-Y Compound Vise 2 Way Heavy Duty Cross Slide Vise Clamp Machine Metal Milling

  • Material - This X-Y compound vise made of heavy duty cast iron construction, Powerful serrated steel jaws.
  • Size - 6" wide machinist jaws ,Maximum jaws opening: 5.9" , Jaw depth 2.08 inch.
  • Vice Travel X: 5.5inch Vice Travel Y: 7.48inch.cold rolled steel....
  • Usage - uyoyous cross slide vise have swivel crank handles for adjusting vise front to back and left to right, bolt down slots for securing..
  • Function - Hinged vise crank handles drops out of the way, designed for woodworking and metalworking..
  • Wide Application - our heavy duty cross slide vise designed for woodworking and metalworking, widely used in milling machine, drill press and....
Check Stock

Mixiflor 40Pcs Cone Shape Abrasive Sandpaper 1/4 Inch Shank Flap Wheels 80/120/180/240/320 Grits Aluminum Oxide for Removing Rust Deburring Polishin

  • MOST COMMON SHANK SIZE: The 1/4 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die....
  • METALWORKING APPLICATIONS: The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and....
  • WOODWORKING APPLICATIONS: Often used for flap sander wheels in woodworking for the stripping of old layers of paint when during resurfacing projects....
  • PREMIUM MATERIALS: High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and....
  • YOU WILL GET: 6*15mm Cone Shape Abrasive Sandpapert - 5 Different Sanding sizes ‒ 8 pcs of each 80/120/180 /240/ 320 grits.
Check Stock

Edge Technology Pro Vise Stop Single Side 6

  • Serves as a rigid stop for milling set-up.
Check Stock

HHIP 3900-2125 Tool Steel Universal Work Stop

  • Very handy for small parts that do not require the full length | Clamps quickly & easily to the top of existing hard jaws or soft jaws.
Check Stock

IRWIN Tools Record Light Duty Workshop Vise, 4.5-Inch (4935507)

  • 4-1/2 in. jaw width and a 3 in. jaw capacity..
  • Vises designed for the professional woodworker..
Check Stock