ReviewsMeter Base Antenna

Smart Signal Meter with Integrated Channel Finder - Works with Any Antenna to Help Locate The Most Channels

  • App-enabled interactive Bluetooth technology signal meter makes it simple to position your antenna and receive the maximum number of free channels.
  • LTE filter chip set eliminates 3G/4G/5G LTE interference above 608 MHZ.
  • Connects to any amplified or non-amplified TV antenna.
  • Simple setup with professional results - Using both visual and audio indicators, you'll get real-time feedback for optimal antenna position and the best signal..
  • Signal meter makes it simple to position your antenna. The app shows a summary of available signals, and you can fine-tune individual channels for maximum reception..
Check Stock

Patriot PAT12 2000 watt 12 Base Station CB Radio Antenna

  • 12 Foot Tall Fiberglass Hi Performance CB and 10 Meter Base Roof Vertical Antenna..
  • Includes U-Clamps to attach to an Optional Mast Pipe..
  • Accepts any Optional Coax Cable with PL-259 Connector..
  • Easily Tuneable , Rated 2000 Watt P.E.P No Radials required..
Check Stock

Winegard RFL-332 SensarPro TV Signal Strength Meter, Black, 4.5 Inch

  • Includes: TV Signal Strength Meter with Adapter Kit, and a Coaxial Cable.
  • Perfect For: Provides you with an over the air signal strength meter for digital TV antenna – designed for terrestrial digital television broadcast.
  • Features: The signal finder meter flaunts an impressive LED feedback display, sensitivity adjuster and coaxial Cable for an easy installation.
  • VERSATILITY – Perfect for positioning stationary mounted antennas or can be used by travelers in RV’s looking to aim your directional antenna towards better signals in new or unfamiliar areas.
  • Quality Assurance: DTV signal finder Includes a US manufacturers warranty.
Check Stock

Winegard Flatwave Amped Pro HDTV Indoor Antenna with Bluetooth Signal Meter and Integrated Channel Finder, Up to 60 Mile Range

  • The FlatWave Amped Pro is the only antenna with an actual signal meter integrated into the antenna to provide the best possible customer experience when installing. The Flatwave Amped Pro uses a built-in tuner to get real-time signal data.Power Source Type: Corded Electric.
  • Captures signals up to 60 miles away, and Winegard’s built-in Clear Circuit Technology boosts reception, cuts dropout, and clears pixelation..
  • The ultra low noise (1 dB) digital amplifier is attached directly to the antenna for optimal performance..
  • Become a pro at installation with the Winegard Connected mobile app. Pair it with the integrated Bluetooth Technology signal meter and follow the on-screen instructions to discover the ideal antenna placement. Then connect the antenna to the TV, run a channel scan, and watch the maximum number of free HDTV stations available..
Check Stock

8dBi Strengthen Magnet Base Long-Range 4G Cellular SMA Male/Dual TS9 Antenna for Netgear Nighthawk M1 MR1100 Verizon Jetpack 8800L Mobile Hotpots Router MiFi Mobile Hotspot 4G LTE Router Eifagur

  • Compatible with M2 (MR2100), M1 (MR1100), AC790, AC810, LB1120, LB1121, LB2120. Verizon JetPack AC791L, MiFi 6620L, 7730L, 8800L.
  • Super strong magnetic base, easy to install in any place that can be adsorbed,.
  • Please note: When installing the antenna, please keep it as vertical as possible, install the antenna at the highest place outdoors to get a better....
Check Stock

Waterproof Replacement 5.8dBi Strengthen Magnet Base Pure Copper 915MHZ LoRa Gateway Antenna with 3M/10FT Cable for Helium Hotspot RAK Nebra Bobcat 300 SenseCAP M1 Hotspot HNT Finestra Miner, Eifagur

  • Applications Include: Long Distance LoRa Nodes, LoRaWAN, Applications, Indoor/Outdoor RAK V1 V2 Nebra Bobcat EasyLinkIn SenseCAP M1 & SyncroB.it Finestra MNTD Kerlink Helium Hotspot HNT Miner Mining etc.(915MHZ versions only）.
  • This is an Indoor and Outdoor omni-directional antenna with 5.8 dBi gain. Also included is a heavy duty magnetic base that measures 2.4 inches in diameter and weighs 11 ounces, the main body of the antenna is made of pure copper material, which has more excellent gain performance,.
  • Installation reminder: If it is used outdoors, we recommend that you install it in an open place, please keep it as vertical as possible, install the antenna at the highest place outdoors to get a better signal. if it is used indoors, we recommend placing this inside near a window..
  • Package List: 1 x Antenna Kit, 1 x Adapter.
  • If the witness is down or there is no change, when using this antenna for the first time, please turn off the power of your device, then plug in the antenna, and then turn on the power again..
Check Stock

Authentic Genuine Nagoya TB-320A Fold-Over 39-Inch PL-259 Mount Tri-Band 2m/1.25m/70cm (144/220/440 MHz) Antenna, Includes NMO to UHF (SO-239) Adapter

  • Fold over design allows the Antenna to Fold-Over which allows you to easily put the antenna down in parking garages or in other places where height matters..
  • PL-259 with included NMO to UHF Adapter, Tri-Band VHF, 1.25M, & UHF (137-174, 220-225, 400-520 Mhz), Weatherproof.
  • The TB-320A is the ideal antenna for FM operation on 2 meter, 1-1/4 meter (220), and 70-cm bands..
  • Easy To Install, Omni-Directional, Requires NMO or UHF antenna Mount (Nagoya RB-50 Magnetic Mount Recommended), Measures ~38.5 inches, Stainless Steel Antenna.
  • Pairs Great with the BTECH UV-25X4 or BTECH UV-50X3.
Check Stock

Diamond Original SG7500A Dualband Mobile Antenna

  • The Diamond SG7500A is a 2 meter and 440 MHz (70 cm) mobile antenna. It is a 1/2 wave on 2 meters providing 3.5 dBi gain and a 2 x 5/8 wave on 440 providing 6.0 dB gain.
  • This antenna can handle up to 150 watts. VSWR: 1:1.5..
  • This antenna is approximately 41 inches (1.1 m) high. The antenna is black and silver. The connector type is UHF (for PO mount)..
  • This antenna does not include the mount or coax..
  • One of Diamond Antenna's Supergainer Premium mobile antennas..
Check Stock

Winegard Boost XT Pro - Outdoor Ultra-Low Noise Preamplifier + Integrated Channel Finder

  • The Winegard Boost XT Pro enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels. Only works with any passive/non-amplified antenna..
  • The integrated signal meter makes you the pro at installation. Pair with the Winegard Connected app for no-fuss antenna positioning..
  • TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels..
  • Winegard’s Clear Circuit Technology offers the lowest noise (1dB typical) to deliver more range and less signal dropout and pixelation..
  • Included components: Preamplifier, 110V adapter, hose clamp, USB power cable with 110V adapter, app-enabled Bluetooth technology signal meter, and printed documentation.
Check Stock

Dual Band VHF/UHF Gain Base Station Antenna ANLI A-200 Amateur Radio

  • Can Be Used In On Roof, Attic or Indoor/Outdoor! Approx 6ft Tall!.
  • VHF/UHF Dual Band Gain Base Antenna for 2 Meter & 70cm Amateur Bands!.
  • Handles Up to 300 Watts, Pretuned, 5/7.5 dB Gain!.
  • Includes U-Clamps for Mounting To An Optional Mast Pipe!.
  • Accepts Any Optional Lengths of Coax Cable w/PL-259 Connector..
Check Stock

HYS Dual Band NMO Antenna, VHF/UHF Pre Tuned Amateur, W/13ft Low-Loss RG58/U Coaxial Cable with UHF-Male(PL259), Stainless Steel L Bracket, Trunk/Hole Mount for Car

  • [High Frequency] The HYS antenna features VHF of 144/430 MHz (136-174MHz and 400-470Mhz) with VSWR:< 1.5, Gain: VHF 2.15/ UHF 3.15 dBi for better TX and RX..
  • [Efficient Performance] The antenna exhibits a maximum input power of 150W that works for all 2 meter 70 centimeters mobile radios..
  • [Durable] The mount is a “trunk lid” mount with 13 ft low-loss RG58U coaxial cable with UHF-male(PL259) connector installed. This is a high quality, low profile base mount that does the job very well..
  • [Easy Installation] The HYS antenna is equipped with 13 ft NMO cable that is connected easily with the antenna and still have plenty cable left to reach the antenna mount practically anywhere on your car or another other vehicle. For a rugged installation, all you require is a small, typically 3/8 inch 3/4 inch, hole to be drilled through the surface that will host the mount..
  • [Package Contents] The HYS package includes L-bracket hole stainless steel for trunk groove or side mounting, 3/4″ NMO hole mount with screws and L-bracket HYS TCJ-N1 coax NMO mount cable, mobile antennas perfect for car and truck’s hood..
Check Stock