ReviewsMeterk Laser Engraver Metal

ATEZR P20 Plus 120W Laser Engraver with KA Air Assist, 20W Laser Power Laser Cutter, Laser Engraver and Cutter Machine for Wood and Metal, Large Working Area 17”*17”-Grey

  • - ATEZR P20 PLUS Laser Cutter Machine with KA Air Assist, which is a laser cutter and engraving machine with 120W machine power and 20-24W laser power. With an ultra-fine compressed spot down to as small as 0.06 x 0.08mm, Atezr laser cutter and engraver machine is capable of cutting 15mm paulownia wood and 10mm acrylic in one pass, as well as up to 25mm paulownia wood, 40mm acrylic, and 0.05mm steel sheet..
  • & - Achieve high efficiency and accuracy with ATEZR P20 Plus laser engraver and cutter machine, which has a unique industrial design and a sturdy frame made of high-density Aluminum Alloy. With motion stability under high-speed up to 24,800mm/min, Atezr laser engraver for wood and metal saves 40%-80% time compared to 10W machines. The working area of the engraving and cutting machine has been expanded to a large range of 17x17 inches to meet your various creation needs..
  • - - Stay safe and comfortable while using ATEZR P20 Plus laser cutting machine, equipped with a 32-bit motherboard and a red emergency button that allows you to stop the operation at any time. There are also 2 limit switches installed on the X-axis and Y-axis to locate the laser module and....
Check Stock

Comgrow Laser Rotary Roller, Laser Engraver Aluminum Y-axis Rotary Roller Engraving Module for Engraving Cylindrical Objects Cans, with 8mm-86mm Adjustment for DIY Laser Marking Different Size

  • 【Wide compatibility】Comgrow rotary laser engraver is applicable to Laser engraving machine and 3D Priter. Work with COMGO Z1, ROBO CNC laser, Comgrow Laser Master, Creality 3D printer Ender 3 and most other brand laser engraver.Note the description in Figure 2.
  • 【Easy Setup and Use】Ready to use laser rotary roller after unpacking, Connect to laser engraving machine simply by replacing Y-axis terminal, no assembling needed, smaller size to better work with most laser engravers..
  • 【Perfectly matched with engraving machine to engrave round objects】The One-piece rubber laser engraver rotary, hardness up to 70A, stronger friction, allowing you to perform 360-degree engravings on round or cylindrical objects such as cups, pen,bottles, pipes, bowls, drums and tubes and over-length plate engraving or cutting..
  • 【Engraving Table Height】 This aluminum rotary laser engraver has a height of 2.36”. Please ensure the space between your machine’s laser head and engraving table can accommodate this added height. Adjustable axes distance up to 3.39” to process a wide range of cylinder diameters..
  • 【One-year Warranty】 Comgrow rotary engraver includes a 12-month warranty to guarantee a reliable product in good working order.We are COMGROW manufacturer....
Check Stock

xTool D1 36w Higher Accuracy Laser Engraver with Material Box, 5w-7.5w Laser Cutter and Engraver Machine, Support LightBurn, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Paper(17'x15.98')

  • 【Finer Details by 0.08*0.08mm Ultra-fine Compression Spot】xTools D1 is the Best DIY laser cutter and engraver machine for beginners/business starter/ hobbyists/designers/home-makers/professionals. It adopts the latest high power 5-7.5W laser module with 0.08mm ultra-fine compressed spot, cutting speed up to 10000mm/min, can cut 8mm wood board and 3mm acrylic in one pass, directly engrave uncoated stainless steel.
  • 【Higher Accuracy Cutter and Engraver Machine】The all-steel wheel and shaft and synchronous belt enable motion accuracy of up to 0.01 mm and repeatable positioning accuracy of less than 0.02 mm, allowing the xTool D1 laser engraving machine to engrave and cut all details of design drawings 1-to-1 with high silence throughout. It maintains a perfect engraving effect even after long times use.
  • 【All in One Kit】These xTool D1 kit comes with the xTool D1 laser cutter and engraver machine, rotary attachment and laser material Box. With a rotary attachment, xTool D1 can engrave diameter cylinders as small as 3mm. The laser material box include 10 kinds of popular materials, including metal, wood, rubber, etc. You can start your creation quickly with xTool D1 Rotary attachment and Materail kit.
  • 【Wide Compatibility and Multiple Connection W....
Check Stock

ATEZR V35 Plus 160W Laser Engraver with KR PRO Chuck Rotary and KA Air Assist, 35W Output Power Laser Cutter, DIY Laser Engraver and Cutter Machine for Wood, Black Acrylic, Metal etc.

  • 【WORLD’S FIRST 35W LASER Engraver】Atezr V35 PLUS 35W Laser Engraver has 160W machine power and 34-36W laser power. This allows ATEZR V35 PLUS laser cutter to cut 18mm paulownia wood, 12mm black acrylic, and a maximum of 30mm paulownia wood, 40mm black acrylic in one go. Atezr V35 PLUS is the first 35W laser engraver on the market today, delivering unrivalled speed and precision for all your engraving needs. From wood to glass, Atezr V35 Plus can handle it all, creating deep, detailed engravings in no time. And, with faster processing times, you can complete engraving jobs quickly and efficiently, allowing you to take on more work and grow your business..
  • 【SUPER ACCURACY - HIGH-QUALITY WORKS】Atezr V35 PLUS Laser Engraver and Cutter Machine adopts spot coupling technology, the laser consists of six beams of diode lasers to achieve ultra-fine compression spots as small as 0.06 x 0.1 mm. You can achieve very sharp and precise lines and contours with Atezr V35 PLUS Laser Cutter, even when working with very complex designs. And a higher compression can provide faster processing times and reduce the likelihood of burning or scorching the material. Higher compression spots can also help reduce the amount o....
Check Stock

Aufero Portable Laser Engraver, Mini Laser Cutter and Engraver Machine for Wood and Metal, 32-bit Motherboard LaserGRBL(LightBurn), Eye Protection Fixed-Focus, 7.1'' x 7.1'' DIY Engraving Area(LU2-2)

  • Pre-assembled Package: The Aufero 1 portable laser engraver comes pretty much assembled.
  • simply insert the laser head into its holding bracket and connect the two wires and it is going to work right out of the box.
  • perfect entry-level laser engraver for the beginners and hobbyists.
  • Advanced Firmware: Adopting advanced motherboard (32-bit MCU) for fast and precise engraving.
  • processes 32 instructions and supports up to 921600 baud rate.
  • LU2-2 fixed focus laser module has a luminous power of 1,000-1,600mw and 0.07x0.06mm focal spot, perfect for engraving high precision patterns.
  • Broad Compatibility: The Aufero 1 laser engraver works with mature engraving software-LaserGRBL(free), LightBurn(paid).
  • supports Win XP / Win 7 / Win 8 / Win 10, Mac and Linux systems.
  • supports BMP, JPG, PNG, JPEG, SVG file types.
  • works on food, MDF, paperboard, plywood, black acrylic, leather, powder-coated metal, stone, etc.
  • 4 Safety Protection: Built with 4 protections: active position protection, exposure duration detection and limitation, laser beam safety guard and current safety control system.
  • full safety protection allows you to hook on your project without any worry.
  • Dual Eye Protection: The Aufero 1 laser engraving machine features a protective cover that effectively fil....
Check Stock

Laser Engraver,WAINLUX Z3 Portable Laser Engraving Machine 0.05mm High Precision,Auto Fixed Focus Compressed Spot, Foladable Laser Engraver for Wood and Metal,Acrylic,Leather, DIY Engraving

  • 【Upgraded Auto Focus &Lift Design】WAINLUX Z3 Laser engraver support one touch auto focus,it will also projects a preview of your image on the surface before engraving, make your work more efficiently. It is foldable design and no need to install.Your engraving work will not be limited by place and time any more since it is compact and lightweight and portable and can be power supplied via power bank..
  • 【Faster and Higher Accuracy Engraving】Z3 laser engraving machine with 5W laser power and 0.05mm ultra-long and finer infrared laser,the max engraving speed reach 600mm/s, bring you fast and precise engraving experience and making each engraving lifelike.The fixed engraving area is 80mm*80mm.(Note:For metal,Z3 will only work on COATED METAL).
  • 【Bottom Hollow and Rotatable Design】 Using Z3 to get more carving modes. Both of the flat and convex side of the movable board can be placed according to your needs for carving and cutting. With unique rotatable design,Z3’s rotatable Design allows you to engrave any bevel within 180°. You can also place the Z3 directly on top of large objects for accurate marking break the height and area limitations..
Check Stock

Atomstack A5 pro Laser Cutter and Engraver Machine by UESUIKA, 40w Diode Laser Engraving Machine, 5-5.5W Optical Power, Easy Assembly, Eye Protection Fixed Focus Compressed Spot

  • 【Get a free Laser Engraving and Cutting Materials】 Please click the "Promotion Available" button ,then click "Add both to Cart".
  • you will get a free Laser Engraving and Cutting Materials as you order Atomstack A5 pro laser cutter.
  • 【Reason for Choice】The A5 pro laser engraver has a large engraving range of 15.74 x 16.1inch. 5.5W Optical output power of laser. Fixed Focus Compressed Spot, higher accuracy, and more refined engraving products. It can not only engrave but also cut 1/5" of the wood and acrylic..
  • 【Create Your Own Logo】The A5 pro 40W laser engraver for home can meet your daily needs. It can engrave on wood, bamboo, paper, plastic, leather, PCB board, aluminum oxide, non-reflective plating and lacquered metal, ceramics. You can engrave your own logo for your favorite items..
  • 【Assembly is quite easy】Everything is neatly packaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The entire setup was about 30 minutes..
  • 【Perfectly compatible system】The laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Window....
Check Stock

LaserPecker 3(Basic) Laser Engraving Machine, Fiber Laser Engraver 1064nm Cold Red Light 0.01mm Compressed Spot, 48000mm/min High Speed Handheld Fiber Laser Marking Machine for Metal Jewelry Plastic

  • Fiber Laser Engraver for Metal and Plastic: LaserPecker 3 laser engraver with 1064nm fiber laser for metal and plastic materials. e.g: stainless steel, gold, silver, aluminum, titanium, copper, coated metal plate.
  • acrylic, plastic, etc. Can be directly engraved without any preprocessing..
  • Much Smaller Compression Spot: LaserPecker 3 laser engraving machine adopts a 0.01mm*0.01mm ultra-fine compression spot, achieving detailed and vivid engraving images. Present pixels with 4K level perfectly..
  • Ultra Fast Engraving: LaserPecker 3 fiber laser marking machine with innovative galvo technology achieves high-speed engraving at 48000mm/min. Comparable Industrial-grade engraving speed brings a subversive experience..
  • Easy To Focus, Quick To Start: LaserPecker 3 laser engraving machine adopts dual infrared light positioning design (When the two red light spots are coincident, the focus is correct), which can accurately locate the marking position without offset and good position.
  • Quickly and accurately control the lifting of electric stand, can be realised easy focus on objects of different heights..
  • Versatile Base, Create With Easy: With the help ot the positioning plate on the base, the position of the engraving objects can be fixed/adjusted, making batch engra....
Check Stock

xTool D1 Laser Engraver with Rotary & Material Box, 10W Higher Accuracy Laser Cutter, 60W Laser Cutting Machine, Laser Cutter and Engraver Machine, Laser Engraver for Wood and Metal, 17'' x 16''

  • ...W is the machine power of the laser machine.
  • Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 10mm wood board and a 5mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
  • All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 laser engraver more stable with less noise and 3 lifetimes longer than similar products.
  • Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.06mm ultra-fine compression spot, achieving detailed and vivid engraving images.
  • Wide Compatibility - xTool D1 supports LightBurn and xTool Creative Space software (Newly upgraded). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
  • Turn Your Imagination Into Creativity - xTool D1 10W is suitable for more professional creators, like carpenters, craftsmen, artists, designers, practitioners of science and technology education and more.
  • All-in-One Kit - Rotary Attachment and Material Box are also provided, with which you can start your creation quickly with the xTool D1 laser engraver and cutting machine.
  • Eye Protection Design - The anti-UV filter acrylic on the laser module filters 97% of UV rays to protect your eyes and those around you.
  • Professional Support - We have a profes....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine, 5.5-7.5W Laser Power, DIY Engraver Tool for Metal/Glass Etching Kit/Wood Carving, Engraving Accuracy 0.01mm, Area(15.74\x16.14\)

  • ...on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching your artworks producing..
  • Solid & Easy Installation Structure Design: Industrial grade steel structure design makes the laser cutter and engraver machine more reliable and improves engraving accuracy. The entire engraver tool adopts a modular design, which is convenient for users to assemble, repair, replace and update laser engraving machine parts. And the assembly can generally be completed within 10-20 minutes..
  • Large carving Area: 400*410mm (15*16 inch) Large engraving range to meet various DIY needs. Unleash your creativity on over one hundred materials including black metal and wood, acrylic, paper, glass, bamboo, leather PCB board, aluminum oxide, etc..
Check Stock

SCULPFUN S9 Laser Engraver, Full-Metal CNC Laser Engraving Machine with 5.5W High Precision 0.06mm Ultra-Thin Beam Diode Laser Cutter for Wood, Leather, Acrylic, Large Engraving Area 410x420mm

  • 【90W Effect Ultra-thin Laser Beam】Our new SCULPFUN S9 laser engraver uses the latest 5.5W laser beam shaping technology diode laser, which has an ultra-fine 0.06mm sharp laser focus. With super cutting penetration and accuracy, It can cut up to 15mm thick lightwood, 10mm black acrylic and carve ceramics, stainless steel and dark stone..
  • 【Fast Focusing and High Accurancy】With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of SCULPFUN S9 laser engraver machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
  • 【Security and Protection Designs】The laser filter cover of SCULPFUN S9 laser engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
  • 【Sturdy and Easy to Assemble】The all-metal structure design makes the desktop SCULPFUN S9 laser cutter more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data c....
Check Stock