ReviewsMethanol Flow Meter

DAE MJ-100 1\ NSF61 Lead Free Potable Water Meter, Pulse Output + Couplings, Gallons

  • Horizontal mount with dial facing upward. For the water meter to be installed vertically with water flowing upward, please refer to DAE PD-100 (B08D7356MY), which can be able to be installed in any position, vertically or horizontally, dial facing upwards or downwards or horizontally, water flowing downwards or upwards..
  • Certified by NSF to meet ANSI/NSF 61 for material safety and ANSI/NSF 372 for lead free plumbing as defined by the US Safe Drinking Water Act. Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website..
  • Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go..
  • Ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also....
Check Stock

Dura Products DPABS-4315E Dura-ABS – 110V Auto Batch System w/Dura-Meter w/Lexan Faceplate, Dura-Pump w/EDPM Rubber

  • AUTO BATCH SYSTEM: This is an intuitive interface that allows for the selection of manual or automatic operation with the flip of a switch. This is a high-flow pumping system with up to 15GPM flow rate..
  • HOW IT WORKS: The Auto-Batch System is easy to use. All you need to do is select the volume desired, press START. The pump will begin to dispense fluid and automatically shuts off when complete..
  • KIT INCLUDES: The Dura-ABS kit includes high-flow Dura-Pump and Dura-Meter with Lexan faceplate. It is available in preset, quick list or manual calibration..
  • DURA METER: The fluid flow meter has 100% moisture sealed circuitry that makes meter impervious to water intrusion. It is also equipped with menu driven backlit display to check the fuel level. It can be plumbed both for in-line and 90o applications..
  • DURA PUMP: The hydraulic pump has a 30-minute duty cycle and automatically shuts off after 10 minutes. The included ¼ HP motor is thermally protected from overheating which makes it suitable for elaborated use..
Check Stock

Dura Products DPABS-4312E Dura-ABS – 12V Auto Batch System w/Dura-Meter w/Lexan Faceplate, Dura-Pump w/EPDM Rubber

  • AUTO BATCH SYSTEM: This is an intuitive interface that allows for the selection of manual or automatic operation with the flip of a switch. This is a high-flow pumping system with up to 15GPM flow rate..
  • HOW IT WORKS: The Auto-Batch System is easy to use. All you need to do is select the volume desired, press START. The pump will begin to dispense fluid and automatically shuts off when complete..
  • KIT INCLUDES: The Dura-ABS kit includes high-flow Dura-Pump and Dura-Meter with Lexan faceplate. It is available in preset, quick list or manual calibration..
  • DURA METER: The fluid flow meter has 100% moisture sealed circuitry that makes meter impervious to water intrusion. It is also equipped with menu driven backlit display to check the fuel level. It can be plumbed both for in-line and 90o applications..
  • DURA PUMP: The hydraulic pump has a 30-minute duty cycle and automatically shuts off after 10 minutes. The included ¼ HP motor is thermally protected from overheating which makes it suitable for elaborated use..
Check Stock

FST Performance RPM350 FloMax 350 Clear Anodized -6/-8 AN Port Fuel Filter/Water Separator System

  • High fuel flow capabilities and extremely low fuel flow restriction coupled with highly efficient 4 micron filtration.
  • Designed for use in gasoline, racing fuel, ethanol, and methanol in a wide variety of motor sports applications and engineered for either suction or pressure side mounting.
  • Multiport design allows unused fuel ports to function as a fuel system drain, regulator mount, fuel pressure gauge port, flows 300 gallons per hour with a filtration efficiency of 4 microns and burst pressure for this unit is 250 PSI.
  • Filter measurements are 4.25 inch height, 3 inch width and 3.75 inch depth.
  • unit weight is only 19 ounces and features 1/2 inch NPT (pipe threads) ports.
  • made of solid billet aluminum to eliminate porosity, leaking or air intrusion.
Check Stock

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

  • ...rdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
  • 【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
  • 【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
  • 【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one unit, compact lightweight construction, convenient for use. Argon Regulator is a ideal choice for professional TIG/MIG welding applic....
Check Stock

Aeromotive 11186 In-Line Brushless 5.0 Gear External Fuel Pump with Mounting Feet, 1 Pack

  • Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
  • Supports naturally aspirated engines up to 3400 HP with EFI, up to 3600 HP carbureted and forced induction up to 2600 HP with EFI and up to 2700 HP carbureted.
  • Capable of 90-psi continuous operating pressure, 150 psi peak, base plus boost.
  • EFI rated flow of 1, 700 lbs./hour at 40 psi, 13.5 Volts.
  • carb rated flow of 1, 850 lbs./hour at 9 psi, 13.5 Volts.
  • Reduced current draw at higher, EFI pressures.
  • lighter than the traditional external mount pumps.
  • extended service life in methanol and ethanol.
  • Pressure regulator not included (sold separately) - for EFI applications use regulator P/N 13134 or P/N 13110, for carbureted applications use regulator P/N 13202 or P/N 13212.
Check Stock

Fill-Rite FR711VA Cast Iron 115V AC Fuel Transfer Pump with Discharge Hose, 901-Gallon Meter, and High-Flow Automatic Nozzle, Red

  • HIGH-FLOW FUEL TRANSFER: Rotary vane high-flow fuel transfer pump designed for gas, diesel, and biodiesel.
  • MADE IN THE U.S.A.: High-flow pump features heavy-duty cast iron construction.
  • EASY TO USE: Easy-to-read 4 digit mechanical meter.
  • 30-minute duty cycle with 20GPM flow rate.
  • NOZZLE INCLUDED: Fuel pump with an iron rotor and carbon vanes.
  • includes a 1-inch x 18-foot static wire and high flow automatic nozzle.
  • 1/3 HORSEPOWER: Flow pump with a 901-gallon meter and 1/3 horsepower motor.
Check Stock

Carbole Universal Electric Fuel Transfer Pump Self-Priming 35 GPH 5-9PSI 12V

  • 12V Electric Fuel Pump Universal Fit - Most 4,6 & 8 Cylinder Carburetor Applications..
  • Must be Mounted Within 12 Inch Fuel Tank..
  • Eliminates vapor lock and flooding, works well as a fuel transfer pump or booster pump ..
  • Not for Fuel Injected Engines. Perfect for use with gasoline/petrol applications, but not for Diesel, E85, Ethanol, Methanol, etc. Excellent customer....
Check Stock

Carbole 12 Volt Electric Fuel Pump 5-9PSI, 35 GPH for Gasoline Engines

  • New Super 12S Fuel Pump. Fuel Pressure: 5-9 PSI.
  • Must be Mounted Within 12 Inch Fuel Tank.
  • 12V Electric Fuel Pump Universal Fits for Most 4,6 & 8 Cylinder Carburetor Applications.
  • Eliminates vapor lock and flooding, works well as a fuel transfer pump or booster pump ..
  • Not for Fuel Injected Engines. Perfect for use with gasoline/petrol applications, but not for Diesel, E85, Ethanol, Methanol, etc. Excellent customer service & fast shipping..
Check Stock

NEW HOLLEY 110 GPH BLUE ELECTRIC FUEL PUMP WITHOUT REGULATOR,STREET & STRIP CARBURETED APPLICATION,COMPATIBLE WITH GASOLINE ONLY,12 VOLT

  • ... Has externally accessible pressure relief valve (max 14 PSI) | Rotor/vane pump design is more tolerant of contaminated fuels | Weighs only 3 lbs | Includes mounting bracket | Repair kits are readily available | Can be serviced from the pump end | Not compatible with alcohol or methanol fuels | Use of safety shut-off switch, P/N 12-810, strongly recommended | Not designed or recommended for use with fuel injection systems | Fuel pressure regulator not included.
  • Specs: Application: Universal | Bracket Color: Silver | Brand: Holley | Emission Code: 5 | Free Flow GPH: 110 | Free Flow LPH: 416 | Fuel System: Carbureted | Fuel Type: Gasoline | Inlet Size: 3/8" NPT | Material: Aluminum | Motor Finish: Silver | Outlet Size: 3/8" NPT | Product Type: Fuel Pump | Pump Body Color: Silver.
  • Note: Should be mounted below the fuel level of the tank for a good gravity feed on the inlet side. These should be used with 12 volt systems only. Street/Strip Carbureted Applications Compatible with Gasoline Only..
Check Stock

Stage 1 Boost Cooler™ Forced Induction Water-Methanol Injection Kit Red High Temp Nylon Tubing Quick-Connect Fittings

  • Adjustable Boost Activated Water-Meth Engagement, 100% Methanol Resistant, Low Level Monitoring, LED Alert System, High Flow Check Valve, 300 PSI UHO....
  • Includes: 300 PSI UHO Pump, 3Qt Tank, Adjustable Boost Pressure Switch/Relay, 20 AMP Fuse/Fuse Holder, (20') Red High Temp Nylon Tubing, Boost....
Check Stock