ReviewsMetric And Imperial Measuring Wheel

4 Rolls 1 Inch Ruler Tape Repeating 12 Inch 30 cm Imprint Short Self-Adhesive Table Sticky Measuring Tape Ruler Measure

Practical and useful:Do you need to measure something that's difficult to measure? Whether it's fabric or an oddly-shaped gourd that you're decorating....
Easy to peel and stick: Ruler Tape is highly visible yellow paper tape with clear black printed ruler markings, and can be easily separated and placed....
Imperial and Metric versions: our Ruler Tape have Imperial and Metric versions,each 1/8,1/16 of an inch is marked and is numbered 1 through 12, and....
Wide uses:this Ruler Tape is ideal for classrooms as a teaching aid, desks ,Create growth charts in a classroom to teach measuring,Use on fabrics when....
Size Information:this Ruler rape width is 1 inch ,You will got 4 rolls Ruler Tape Repeating 12 Inch.

Check Stock

YESWELDER MG-11 Metal Weld Fillet Gages Set 7PCS 1/8 -1 Welding Inspection Test Ulnar MM & inch

Permits quick and accurate measuring of the most popular..
Checking fillet leg size and fillet throat size..
Increments standard and metric equivalents etched into the surface for clarity and easier reading..
Fillet sizes in imperial:1/8''-1'' and metric:( 3.2-25.4mm).

Check Stock

1 TU58 Thread Measuring Gauge, Vertical Bolt and Nut Gauge / Thread Checker (Inch & Metric)

【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.

Check Stock

DEKOPRO Measuring Wheel Collapsible Digital Display Measures Up To 99,999 Ft Compact Wheel With Cloth Carrying Pack,12-Inch

Unique Design: Ergonomic grip design, comfortable to hold. Telescoping handle, easy to carry and store, which is extends to 38 inches and folds down to 24 inches for easy carrying and storage in the soft carrying bag. The Digital Measuring Wheel measures meters up to a 99999.9 M/ FT range. All buttons are waterproof and dust-proof..
Easy To Use: Displays your measurments clearly by easily rolling our measuring wheel, and you can keep 100% track of your measurement distances anytime(SM). The handle features a large, digital LCD screen with backlight for easy viewing and the memory (RM) can store and recall up to five values..
Accurate Measurement: Measures in Metric or Feet. The wheels will let users easily convert from Feet to metric units and vice-versa.The distance wheel runs on 2pcs AAA long-life batteries (included in package). Rubber measuring wheel is also suitable for slippery ground,easy to roll to accurately measure length, width, height, perimeters and circular calculations..
High Quality &Durable: The kickstand is sturdy, ensuring the concrete tool is built to last. Measuring 12” in diameter with a 3' circumference, this big wheels boasts a plastic molded wheel for long-lasting strength and use. Great alternative to standard tape measures..

Check Stock

HOWOD Pocket Hole Jig Kit, Professional and Upgraded All-Metal Pocket Screw Jig.

Easy Adjustment: Simply loosen the thumbscrews to release the marked slider, set the slider to the thickness of material to be drilled, and then re-tighten the thumbscrews. Slider markings are in both imperial and metric measurements for all projects needs..
Fast and Easy: No complex measuring or math required making it perfect for novices, hobbyists, and pros alike. This pocket hole jig makes the assembly of any project quick and easy, leaving no visible screw holes. It will take your woodworking projects to a more professional level..
Versatile: This pocket hole jig will help you drill perfect pocket holes every time in hardwood, softwood, and sheet (MDF) materials to quickly construct cabinetry, furniture, and other types of joinery with ease. Quick, tool-free adjustment and imperial and metric markings on this jig eliminate the need for extra steps or measuring devices..
What You Will Receive: 1 Pocket hole jig, 2-3/8” titanium-plated stepped drill bits, 1 Additional slider, 2 Magnetic square drive bits, 6” and 4” long, pocket hole screws and wooden hole plugs, 2 drill stop collars, 4 Allen wrenches, 1 wrench. We proudly offer professional customer service and will respond promptly to any questions or concerns ....

Check Stock

QISF Multi-Purpose 2 Pack Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth

【Function】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
【Material】--Stainless steel and chrome finish, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
/ 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
【Package】-- 1 x 58Pcs Blade Metric & America SAE Type & British Whitworth.

Check Stock

5pcs Stainless Steel Screw Thread Pitch Cutting Gauge Tool Set, Metric Imperial and America SAE Type Screw Gauge for Industrial Measurement, 3Pcs Center Gage + 1Pc America Type + 1Pc Metric Imperial…

☆ 52pcs Thread Pitch Gauge ☆ : MR Stainless Steel Screw Pitch Measuring Tool 0.25, which is useful to check the tool angle when cutting threads on a metal lathe, check the angle of the thread cutting tool on the V-groove of the gauge.
☆ Premium Material ☆: Made of MR stainless steel, the toothed edges are sharply defined, and the numbers are stamped and easy to read, to ensure the accuracy of measurement.
☆ Good Elasticity & High Strength ☆ The Surface of thread pitch gauge is polished, chrome-plated and high rust-proof.
☆ Metric & Imperial ☆: 6.0, 5.5, 5.0, 4.5, 4.0, 3.5, 3.0, 2.5, 2.0, 1.75, 1.5, 1.25.1.0, 0.9, 0.8, 0.75, 0.7, 0.6, 0.5, 0.45, 0.4, 0.35, 0.3 0.25and 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
☆ At a glance, Easy to use ☆ : ideal for check the thread size, can be used for measuring the imperial screw thread and metric.

Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Measuring (0.02-1.00 mm,Short 17 Blades)

Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 17 blades thickness.
Foldable feeler gauges, easy and convenient to take and store.
Easy identification: dual marked metric and imperial, 0.0008 inch/ 0.02 mm to 0.0394 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
Metric sizes (mm): 0.02, 0.03, 0.04,0.05,0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25 0.30, 0.40, 0.50, 0.75, 1.00.
Inch sizes: 0.0008-0.0394 inch, various sizes bring convenience when measuring.
Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.

Check Stock

Metal Enclosure, Shielded, Diecast, IP54, Instrument, Aluminium Alloy, IP54, 153 mm, 82 mm

Price For: Each Enclosure Type: Instrument Enclosure Material: Aluminium Alloy IP Rating: IP54 NEMA Rating: - External Height - Metric: 153mm External Width - Metric: 82mm External Depth - Metric: 50mm Body Color: Unfinished External Height - Imperial: 6".
Product Range: -Description1590P WITH NO PCB GUIDES.

Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Gap Measuring (0.05-1.00 mm, 20 Blades)

Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 20 blades thickness.
Foldable feeler gauges, easy and convenient to take and store.
Easy identification: dual marked metric and imperial, 0.002 inch/ 0.05 mm to 0.04 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
Metric sizes (mm): 0.05 to 1 mm, various sizes bring convenience when measuring.
Inch sizes: 0.002, 0.004, 0.006, 0.008, 0.010, 0.012, 0.014, 0.016, 0.018, 0.020, 0.022, 0.024, 0.026, 0.028, 0.030, 0.032, 0.034, 0.036, 0.038, 0.040.
Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.

Check Stock

2 Pack Thread Pitch Gauge, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth, Multi-Purpose Screw Pitch Cutting Gauge Caliper Gages Measuring Tool

★【What You Get】: In this thread pitch gauge kit, it include 51Pcs America SAE type, 52pcs metric and Inch type, 3pcs metric & america SAE type & British Whitworth, they are well packed in a plastic box, easy for carry and store..
★【High Quality】: All the thread pitch gauge are made of stainless steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
★【Measuring Range】: 51pcs America SAE type measuring range is 4-84.
58pcs Metric & America SAE Type & British Whitworth Metric is 0.25-6.0mm, Imperial is 4G-62G US: 8, 10, 11, 14, 19, 28..
★【Easy to use】: Designed with a hole on each end, use screw for easy adjust and disassemble, from where you press the tooth gauge, you can easily rotate the thread blades, numbers are stamped clear for read..
★【Wide Application】: They measure accurately and have almost no errors. Typically used to check the mold & machine & mechanical thread size determination is correct.
Accurately measures internal and external screw threads with thread blades of varied size.
Center Gauge use to grind and position thread cutting tool on a lathe..

Check Stock