ReviewsMetric Countersink

AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking

  • ... include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching.
  • Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency..
  • Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Included convenient swivel storage case,Swivel feature props up tap drill bits and securely holds them in place until ready to use. The storage case folds up neatly and is convenient to travel with on different job sites and locations..
Check Stock

29-Pack Woodworking Chamfer Drilling Tools WENHUALI 6 Countersink Drill Bits 7 Counter Sinker Drill Bit 8 Wood Plug Cutter 3 Step Drill Bits and 3 Countersink Drill Bit with 1pcs Center Punch.

  • .... Specification: 3/16''-1/2'', 1/4''-3/4'', 1/8''-1/2''. Suitable for drilling holes within 0.12 inch (Iron Plate, Copper Plate, Aluminum Plate).
  • within 0.2 inch (Wood, PVC sheet, Insulation Boards). Not recommend for hard and brittle materials such as stainless steel, glass, tile floors, walls etc..
  • 7Pcs 3- Pointed Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasion resistance, large chip flute and five edge chamfers can drain sawdust faster and easier(Size include: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drilling depth..
  • 8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfections.Could cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 6Pcs 1/4" Hex Shank 5 Flute Countersink Drill Bit – Made of high speed steels, they're pectect for sinking 90° holes into Wood and PVC boards for ountersunk screws and fixings. 6 different diameter: 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4")..
Check Stock

DAYREE 5PCS Countersink Drill Bit Set Wood Drill Bit Set Woodworking Tools #5, 6, 8, 10, 12

  • High-quality materials: High-speed steel counter sink drill is made of high-speed steel material, high hardness, durable, not easy to rust, good corrosion resistance. And provide excellent cutting capabilities.
  • Removable and adjustable: The L-shaped hex wrench provided by Flute countersink drill bit can easily adjust or remove the drill bit and the five-slot chamfer. For your convenience.
  • Multi-purpose: Hex countersink drill bits is suitable for granite, ceramic tile, glass, quartetization, ceramics, ceramic tiles, etc. Suitable for bench drill, hand drill and conventional electric drill.
  • Three-point design: Twist drill countersink bit set to drill a smooth hole quickly and accurately. The five-edge chamfer design will automatically remove chips from the holes on both sides.
  • Package Content: Counter sink bit for wood is a set of countersink bits, equipped with a hex wrench and 5 countersink bits. There are 5 sizes, including #5#6#8#10#12mm, which can meet all your needs..
Check Stock

wesleydrill Countersink Drill Bit Set 5 pcs 82 Degree Counter Sink Fit for Sink Holes into Most Machinable Metals Plywood Softwood Hardwood Fiberglass Plastic Mild Steel

  • [Specifications and packaging]: Countersink drill bit set includes 5 pcs countersink bits and 1 pc aluminum carrying case.Include size:1/4", 3/8", 1/2", 5/8", and 3/4"..
  • [Function]: Counter sink drill bits sink holes into most machinable metals, plywood, softwood, hardwood, fiberglass plastic, mild steel..
  • [Material]: Metal countersink bits are made from industrial grade high-speed steel for increased durability.Each sink has a black oxide coating to resist corrosion..
  • [Advantage]: 82 degree countersink a five-flute design removes chips faster and dills smoother and ensures an extended life..
  • [Special 82-Degree Tip Drills]: Steel countersink bits 82-degree tip drills can drill holes on almost any material, with unique design, high efficiency, convenience and speed..
Check Stock

DKIBBITH Pcs M2 Countersink Drill Bit Set, 3in1 Wood Pilot Countersink Drill Bits Drilling #4#6#8#10#12 Screws Holes, with Adjustable Depth Stop, Quick Release Hex Shank, 2-Allen Wrench

  • Easier & Faster – 3 in1 Drill Countersink and Counterbore in one step, with this 7 Pcs M2 Countersink Set you can get perfect counterbored holes for #4 #6 #8 #10 #10 #12 #12 screws without changing bits.
  • Meet All the Needs – with popular 82 Degrees Countersink and 3/8” Counterbore Bits - You can either have the head of the screw below the surface then conceal it with matching wood plugs, or fit flush with the surface.
  • Cutting Depth Adjustable – You may need holes for long or short screws.
  • these counterbore Drill Bits with Adjustable Depth Stop to fit the length of your screws.
  • just tighten the pilot drill bit with the hex key (included) to the Countersink / Counterbore sleeve.
  • Fit Most Tools – 1/4" hex shank design compatible with most quick-change chuck machines or power drills.
  • Includes 7 pieces of Drill/Countersink/Counterbore 3in1 bits in sizes 5/64”, 3/32”, 7/64”, 1/8”, 1/8”, 9/64” 9/64”。.
  • For Hardwood & Softwood - The HSS M2 Grade countersink drill bit perform well in softwood or hardwood and serve the needs of most woodworkers.
Check Stock

MUXSAM 1/4 inch Hex Shank Countersink Drill Bit Power Tools Accessories for Plastic Metal Woodworking Tool by Power Drill 5Pcs/Set #5#6#8#10#12 (Gold)

  • ♡【SATISFY YOU ALL DEMAND】Countersink drill bit set is include 5 pcs of drill bits in 5 different sizes to satisfy you all demand. The most often used sizes for carpenters, cabinet, furniture makers and other wood working trades..
  • ♡【USER-FRIENDLY DESIGN】Standard 1/4 inch hex shank is quick change compatible and has an adjustable counter sleeve depth with Allen wrench..
  • ♡【MULTIPURPOSE】Countersink drill bit erfect for wooden planks, plastic, soft metals, fiber board, particle board, plywood, alumiumn board etc..
  • ♡【HIGH QUALITY】Countersink drill bit is made by high speed steel, this countersink drill bit is easy to use. Meanwhile compared with ordinary the drill accuracy more high..
  • ♡【GOOD WORKING】The countersink drill bit have self-starting point and five-fluted design eliminates chatter and vibration for smooth operation to make clean, accurate and burr-free cuts..
Check Stock

amoolo Countersink Drill Bit Set 7pcs HCS Adjustable Countersink Drill Bits for Wood 4pcs Hex-Shank Countersink Bits 3pcs 1/2 3/8 1/4 Counter Sinker Drill Bit Set with Portable Case

  • 【IDEAL COMBO SET】4 countersink drill bits size of Ø7/64”(3mm), 5/32”(4mm), 13/64”(5mm), 1/4”(6mm).
  • 【PREMIUM QUALITY】Made with industrial grade high-carbon steel, great hardness provides sharp edges, high strength takes bits with superior cutting....
  • 【EFFICIENT DESIGN】For 4 countersink drill bits, 3-point tricuspid ensures drill process accurate and fast, no offset, slip and bias during....
  • 【REMOVABLE& ADJUSTABLE】Perfect for Wooden planks, Fiberboard, Particle board, Plywood, Plastic, PVC and soft metals. Suitable for hand drill,....
  • 【SOPHISTICATED DESIGN】Extra straightening drill bit with exquisite countersink pedestal provide user a method of drilling a countersink hole with....
Check Stock

WoodRiver 6-Piece Carbide-Tipped Countersink Set with Brad Point Pilots

  • Includes: 7/64" x 3/8", 1/8" x 3/8", 9/64" x 3/8", 11/64" x 3/8", 13/64" x 1/2" and 1/4" x 1/2" Carbide-Tipped Countersinks in a wooden case.
  • Carbide-tipped countersink cuts extremely clean hole.
  • 3/8" dia. countersink 8mm shank, 1/2" dia. countersink 10mm shank.
  • Brad point drill bit is adjustable for screw length, bits range from 2-1/2" to 3-1/8" long - Countersink set is sized for #6 - #14 screws driven in hardwood.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans..
Check Stock

DEWALT Countersink Drill Bit Set #6, #8, #10, 3-Piece (DW2535)

  • Drill, countersink and counterbore in one step.
  • Four cutter countersink and tapered drill bit provide superior speed and ideal finish.
Check Stock

Countersink Drill Bit Set, High Speed Steel Counter Sinker Drill Bit 5 Pcs 5 Flute 6mm Hex Shank with 82 Degree Mill Cutter Bit Countersink Bits for Wood and Metal in Sizes 1/4” 3/8” 1/2” 5/8” 3/4”

  • 【Multiple Sizes Countersink Drill Bit】 – The countersink drill bit set is machined from high speed steel and come in 5 most popular sizes : 1/4, 3/8, 1/2, 5/8, 3/4 inch, which will meet your daily needs..
  • 【HSS Countersink Drill Bit】– The countersink drill bit is made of High-Speed Steel with Titanium Coating, and 82-degree tips for drilling into wood, soft metals, rubber, plastic, mild steel, don't work on stainless..
  • 【Universal 1/4”Hex Shank】– The countersink drill bit is designed with 1/4" round shank, which fits all handheld and stationary drills. And Five-flute design reduces vibration and removes chip better, provides smoother drilling experience and extended bit life..
  • 【Widely-Used Countersinks】 – The Counter Sinker Drill Set contains 1/4.
Check Stock

CDIYTOOL Aluminum Alloys Setup Blocks Height Gauge Kits, Saw Height Gauges Setup Bars for Router Table Saw Accessories Setup Block Bar Gauge Precision for Woodworking

  • Includes: One Wheel Marking Gauge + Two Extra Blades.
  • Wheel Marking Gauge Is A Indispensable Marking/Cutting Gadget Which Will Help You Lay Out Lines Parallel To A Flat Wood Surface With Max Precision And Indicate Exactly Where Wood Needs To Be Cut..
  • The Laser Engraved Graduation Marks On The Bar Are Available In Both Metric And Imperial Versions Up To 6 Inch/150 mm.
  • 1.5 Inch Diameter Solid Brass Face Can Glides Against The Edge Of The Workpiece For Smooth Marking Aligned To Or Against The Wood Grains - Cutter Head Retraces Into Countersink In Head To Protect When Not In Use.
  • 2-Stage Adjustments BodyEasy And Precise Adjustments - Quick Turn Of Knurled Adjustment Knob And Tail Help To Make Adjustments Faster And Easier..
Check Stock