ReviewsMetric End Mills

Shop Fox M1099 10 by 26" Bench athe, Metal, Large

  • ... A 16 TPI reversible lead screw for right-hand and left-hand threads, standard threading dial, and real top and bottom half-nuts, allow you to create every American Standard Unified inch screw thread from 4 to 80 threads per inch. With the extra 21 tooth change gear (included) you can create every American Standard Metric thread from 0.3 to 8.0 mm pitch..
  • Included contents: 32 full page Mini Lathe Users Guide (complete with operation examples, maintenance guidelines, parts diagram, wiring diagram, etc.), Precision 3" (80 mm) 3-jaw self-centering lathe chuck with two sets of jaws and a chuck wrench, Tailstock (13mm) drill chuck with shank and a 6mm drill bit, 8 mm Brazed Carbide RH Turning Tool, MT2 dead center, An 11-gear change gear set that includes a 21 tooth gear for accurate metric threading, Two open end wrenches, Four hex (Allen) wrenches..
  • About Us - LittleMachineShop.com is small U.S. business and the premier source of tooling parts and accessories for bench top machinists. We have a direct relationship with the Manufacturer, and we offer full technical support for the machine plus all replacement parts, upgrades and accessories to keep it running for years of service. The 1014 lathe is manufactured by a world leader in lathes and mills....
Check Stock

Niagara Cutter 17005489 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4' Overall Length, 0.375' Cutting Diameter, 0.375' Shank Diameter

  • 4 flute design for creating finer finishes and a higher metal removal rate.
  • General purpose end mill for working on all types of materials.
  • Made of extra-fine grade carbide for ultra high transverse rupture strength.
  • Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....
Check Stock

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....
Check Stock

JAINGU 1pc T Slot Milling Cutter 4-12mm Shank 4 Flute Carbide End Mills for Metalworking T Slot Keyseat Router Bits CNC Milling Cutter-1pc 6x2x3x9.5x50

  • Package Including:1pc 4 Flute T Type End Mills.
Check Stock

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

  • Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
  • Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
  • When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
  • Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
  • Used for slotting and peripheral milling.
Check Stock

Niagara Cutter - SP205-0.500-D2-S.3-Z2 17011645 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 3' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

  • 2 Flute design makes these ideal for plunge cutting when chip removal is not a problem.
  • General purpose end mill for working on all types of materials.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, pocket and slotting.
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing:Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency:Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting:The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

VCT 5pc Metric Ratcheting Double End Half Moon Reversible Wrench Set 10mm - 22mm

  • Work around corners or other obstacles easily with the half moon curved shape. Normal combination wrenches need 30 degrees to move a fastener but this box ratchet wrench set only needs as little as 5 degrees. 12-point head allows a secure grip on fasteners to protect your project and yourself..
  • Ratchet wrench metric sized tools have a small lever to allow you to switch ratcheting direction with a finger to avoid slippage and to readjust the multi size ratcheting wrench. Get around obstacles with the half-moon 5pc Metric Ratcheting Wrench Set.
  • 12-point double end wrenches heads encase fasteners with hex, jam, cap, and square heads Box end wrench set includes a 10mm and 12mm, 11mm and 13mm, 14mm and 16mm, 15mm and 17mm, and 19mm and 22mm wrenches.
  • Small lever on ratchet box wrench set allows you to switch between tightening and loosening with a finger without letting go of tool set wrenches Get into hard-to-reach areas with metric half moon box end wrenches Half-moon shape allows you to maneuver around poles and pipes so your access is not limited.
  • Box wrenches design helps to eliminate fastener rounding.
  • With as little as 5 degrees, double box ratchet wrench can make adjustments.
Check Stock

BULLTOOLS 32-Piece Combination Wrench Set, SAE and Metric 1/4\-1\ & 7mm-22mm Wrenches Chrome Vanadium Steel Box End and Open End Standard Wrench Set with Case

  • 【16 METRIC & 16 SAE】: Combination wrenches include metric: 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm;SAE: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 19/32, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in..
  • 【PREMIUM CR-V STEEL】: Mirror polished wrench set is made of heat-treated chromium-vanadium steel with good toughness, waterproof and rustproof. Aerospace grade chromium-vanadium alloys are stronger, corrosion resistant and have a longer service life..
  • 【12-POINT DESIGN】: Our wrench head adopts 12-point box end design, which allows easy fastener engagement. End offset by 15 degrees is better for work in a narrow space. It also speeds up your work without repeatedly lifting it..
  • 【STAY ORGANIZED】: 32-piece wrench set with an organizer box allows you to quickly identify the wrench you need. The specifications are comprehensive and more versatile, making emergency repair easier and speeding up the work..
  • 【GOOD VERSATILITY】: Precision box end and open end wrench set with metric and SAE, which is more versatile and widely use. Suitable for equipment installation, bicycle, electric vehicle, automobile and other equipment maintenance..
Check Stock

FAT MAX 141 Piece Matte Black Chrome Mechanic's Tool Set Fmmt71663

  • Metric Spline wrenches can be used on metric 4, 6, 12 point, spline and Torx fasteners.
  • The chrome-vanadium switch lever allows for easy changes in turning direction which helps improve speed.
  • 15-Degree angled offset box end helps keep shank clear of obstructions.
  • Chrome-vanadium box ends and switch levers provide high strength and durability.
  • Box end is countersunk for easy application to the fastener.
Check Stock