ReviewsMetric Gauge

KEWAYO Stainless Steel Feeler Gauge Metric Measuring Tool (0.02-1.00mm, 17 Blades), for Measuring Gap Thickness

  • Easy identification: dual marked metric and imperial, 0.0007 inch/ 0.02 mm to 0.039 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.40, 0.50, 0.75, 1.00.
  • Inch sizes: 0.0007, 0.001, 0.0016, 0.002, 0.0024, 0.0028, 0.0031, 0.0035, 0.0039, 0.006, 0.008, 0.009, 0.011, 0.015, 0.019, 0.029, 0.039.
  • Feeler gauge set: each measuring feeler gauge has 17 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Warm notice: There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about it..
Check Stock

Rannb Metric Feeler Gauge Gap Measurement Tool 12-inch Long 17 Blades 0.02-1.00mm Thickness

  • ⭐【Material】The feeler gauge is constructed from manganese steel with a lube oil coating to prevent pitting and corrosion..
  • ⭐【Dimension】Total Size: 300mm x 15 x 6mm/12" x 0.6" x 0.24"(L x W x H).
  • ⭐【Specification】 Metric sizes (mm):0.02, 0.03, 0.04, 0.05,0.06, 0.07, 0.08, 0.09, 0.10,0.15, 0.20, 0.25, 0.30, 0.40, 0.50, 0.75, 1.00. The feeler gauge is marked in metric. Thickness ranges from 0.02mm to 1.00mm..
  • ⭐【Easy to Identify】 Every blade has its thickness clearly on it for easy identification..
  • ⭐【Package Content】1pcs x Feeler Gauge.
Check Stock

CAMWAY 2Pcs Feeler Gauge Set Stainless Steel Metric/Inch 32 Straight Blade Steel Feeler Gauge,16pcs Feeler Gauge and 45º Blades Offset for Measuring Gap Width/Thickness Measuring Tools

  • 【Two Kinds of Feeler Gauge 】Feeler gauge set, straight feeler gauge with 32 pieces blades and 16-Piece blades offset valve bent feeler gauge..
  • 【Metric and Imperial Dual Marked】Dual marked metric and imperial the specification of every blade was clearly marked on the surface with laser technology so that you could easy identification the Feeler and choose the suitable one conveniently..
  • 【 360-degree Swivel Design 】The Feeler Gauge Set allows you to unfold or fold them easily and carry them with you. You could disassembled into a separate feeler gauge to use by adjusting the screw.Metal fastening screws,and durable..
  • 【Anti-rust 65 Manganese Steel】There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, And Please don't put on the humid environment..
  • 【Use for】The feeler gauge is used to measure the gap size. When checking whether the measured size is qualified, you can use this method to judge, or the inspector can judge according to the tightness of the feeler gauge and the measured surface.It is mainly used for checking the gap value between two joint surfaces..
Check Stock

KUNTEC Cylinder Leak Down Tester Engine Compression Diagnostics Test Tool Kit for Piston Ring, Valve, Head Gasket

  • The Cylinder Leak Detector Kit is designed to easily detect a variety of engine faults, including worn piston rings, worn valves, cracked cylinder walls, and blown head gasket.
  • The Engine Compression Diagnosis Tester Kit also can check the amount of leakage and locate leaks area in an engine cylinder to help determine the source.
  • Cylinder compression tester is suitable for work on any petrol engine with 12 or 14mm spark plugs, and ideal for testing trucks & late model cars where clearance is minimal.
  • Pressure gauge with dual scale reads from 0 to 100 PSI and 0 to 7 Bar, shows pressure in PSI and Bar and percentage of cylinder leakage.
Check Stock

32 Blades Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 32 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88.
  • Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Measuring (0.038-1.02 mm,25 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 25 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.038 mm to 0.04 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.038, 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508, 0.533, 0.635, 0.686, 0.762, 1.
  • Inch sizes: 0.0015, 0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020,0. 021, 0.025, 0.027, 0.030, 0.040.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

2 Pack Screw Pitch Cutting Gauge, 51 Pcs America SAE Type Screw Thread Pitch Gauge and 58 Pcs Metric&Inch &America SAE Type Caliper Gages Measuring Tool

  • 【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
  • Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
  • 【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
  • 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
  • 【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
  • 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
Check Stock

Starrett 156M Screw Pitch Gauge – Thread Measuring Metric Gage Tool with Locking Device, 0.25-2.5 Threads Per Millimeter, 28 Leaves

  • SCREW GAUGE MEASUREMENT TOOL: The Starrett Screw Pitch Gauge is among the most valuable tools in any mechanic's toolbox. It’s used to quickly determine the pitch of various sized screw threads.
  • 28 LEAVES: It features 28 folding leaves that are housed in a durable steel case Each leaf is clearly marked for measuring and matching up to different sized thread pitches.
  • LOCKING POSITIONS: There’s a positive stop locking device at both ends, so helicopter leaves can be securely locked in position for ease of use.
  • GAGES INTERNAL and EXTERNAL THREADS: This model screw pitch gauge is specially designed with narrow leaves that allow you to check both the internal and external threads of nuts and bolts.
  • METRIC MEASUREMENT RANGE: The Starrett 156M Screw Pitch Gauge offers a metric measuring range of 0.25 – 2.50mm TPI..
Check Stock

QISF Multi-Purpose 2 Pack Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth

  • 【Function】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
  • 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
  • Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
  • 【Material】--Stainless steel and chrome finish, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
  • / 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
  • 【Package】-- 1 x 58Pcs Blade Metric & America SAE Type & British Whitworth.
Check Stock

2Pcs Feeler Gauge Set Stainless Steel Metric/Inch 32 Straight Blade Steel Feeler Gauge, 16Pcs Feeler Gauge and 45º Blades Offset for Measuring Gap Width/Thickness Measuring Tools

  • Feeler gauge set: 2 pack feeler gauges, made of 65 manganese steel, the measuring feeler gauge has 32 blades thickness and 16 blades thickness.
  • Foldable, easy and convenient to take and store.
  • Metric and Imperial Dual Marked：Dual marked metric and imperial the specification of every blade was clearly marked on the surface with laser technology so that you could easily identify the Feeler and choose the suitable one conveniently..
  • 360-degree Swivel Design：The Feeler Gauge Set allows you to unfold or fold them easily and carry them with you. You could disassembled into a separate feeler gauge to use by adjusting the screw.Metal fastening screws,and durable..
  • Reminder: There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, And Please don't put on the humid environment..
  • Use for：The feeler gauge is used to measure the gap size. When checking whether the measured size is qualified, this method can be used to judge, or it can be judged by the inspector according to the tightness of the feeler gauge and the measured surface. Mainly used to check the gap value between two joint surfaces..
Check Stock

2 Pieces Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (32 Blades Feeler Gauge, 16 Blades Feeler Gauge)

  • Feeler gauge set: 2 pack feeler gauges, made of 65 manganese steel, the measuring feeler gauge has 32 blades thickness and 16 blades thickness.
  • Foldable, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, 0.0015 inch/ 0.04 mm to 0.02 inch/ 0.508 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): the 32 blades feeler gauge owns 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88.
  • The 16 blade feeler gauge owns 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508.
  • Inch sizes: the 32 blades feeler gauge owns 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035.
  • The 16 blade feeler gauge owns 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020.
  • Warm notice: there is some anti-rust oil on the stainless steel ....
Check Stock