ReviewsMetric J bolts

14 Degree Angled Leg Mounting Plates Furniture Table Leg Attachment Plates Brackets T-Plate M8 Sofa Legs with Hanger Bolts,Converters, Screws,Full Set of 4

  • ...plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 14 DEGREE ANGLED.Your chair woods need NOT to cut in 14 degree in order to fit the mounting plates..
  • Specification – Each T-Plate is 1.89" by 1.89" (L x W). Thickness 1.2mm. Plates have 5/16" threaded (metric 8mm/ M8) attachment holes for hanger bolts ,have 4 unthreaded holes(4.5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • Application- Fit most sofa chair /couches/seats/ottomans/bench/ dresser/ end table and ottoman in market. Full 4 set pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

DURATECH Ratcheting Combination Wrench Set, SAE & Metric, 22-piece, 1/4″ to 3/4″ & 6-18mm, CR-V Steel, with Carrying Bag

  • Wrenches are made from durable chrome vanadium steel, additional mirror finish improves the corrosion resistance of the surface and effectively prolong the service life. DURATECH 22-Piece ratcheting combination wrench set makes emergency repairs a breeze..
  • 72 teeth perfect precision with slim profile. The 12-Point box end delivers reliable torque to tighten or loosen any bolt without rounding. Top-quality hand tools for every repair project..
  • 22-piece SAE&Metric Ratcheting Combination Wrench Set that meets ANSI standard includes 11METRIC+11SAE unbreakable wrench: Metric 6mm, 8mm, 9mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and SAE 1/4’’, 9/32’’, 5/16’’, 11/32’’, 3/8’’, 7/16’’, 1/2’’, 9/16’’, 5/8’’, 11/16’’, 3/4’’. Standard and metric measurements ensure that you have the right tool to tackle any screw or bolt..
  • Tool roll for convenient storage and taking. The tool roll case has each wrench size printed which makes organizing easy..
  • This comprehensive collection of open-ended and ratchet wrenches is a must-have for your roadside emergency kit. They roll up neatly in an organizer bag for storage in your car trunk or mechanics gear..
Check Stock

GLOGLOW 10Pcs Damaged Nut Remover Set,Broken Screw Nut Bolt Extractor Kit,Drive Socket 9/10/11/12/13/14/15/16/17/19mm

  • Broken Nut Screw Bolt Remover Kit. --This is a set of 10 pieces sturdy tools to help remove nuts, bolts, screw heads, studs, etc.
  • Metric Standard. --It fits heads sized 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm and 19mm.
  • Application. -- Spiral cut teeth provide a positive grip to remove rounded off painted over and rusted bolts and nuts.
  • Material. --Made of hard alloy, they are of strong strength and long durability.
  • How to Work. -- These tools can be driven with a metric spanner or socket wrench for fast work..
Check Stock

Segomo Tools 10 Piece Lug Nut Remover & Bolt Extractor - Metric and SAE Extractor Set - 10-19mm Stripped Bolt Remover & Nut Extractor Set - Stripped Lug Nut Remover Kit - NBE10919MM

  • [ Extract Even Damaged Bolts & Nuts ] Remove even the most stubborn nuts, bolts, lugs, studs, hex screws, and more. The left-hand spiral of each piece of this nut anad bolt extractor set is desgined for locking on to rounded ,damaged bolts for easy grip of stud, bolt or nuts..
  • [ Different Metric & SAE Sizes ] Work on different jobs with this extractor socket set. It offers the following sizes: 9mm 10mm 11mm (7/16) 12mm 13mm 14mm 15mm 16mm(5/8) 17mm 19mm (3/4) Can be used on SAE and Metric sizes.The working end has a helical shaped flute to help grip rounded fasteners, round head bolts and pan head screws..
  • [ Will Last For Years ] Our bolt & nut extractor kit is made from black Chrome Molybdenum that provides greater strength and durability and prevents corrosion. You will be able to work with this tool for years!.
  • [ 3/8 Drive Socket Set ] You can use our stripped lug nut remover with 3/8 square drive for use with socket wrench or impact wrench gun..
  • [ Stay Organized ] This lug nut & bolt extractor tool comes supplied in a durable case so that you can keep the set organized and easily transport it between different jobs..
Check Stock

Nut & Bolt Thread Checker (Inch & Metric), Original Version (SWTC-26)

  • Each Size Has A Nut And Bolt Checker On The Same Gauge. 26 Male/Female Gauges - 14 Inch & 12 Metric.
  • Thread Sizes Are Permanently Stamped Onto Each Gauge (Inch In Red, Metric In White).
  • Inch Gauges Are Clear Zinc Plated, Metric Gauges Are Black Oxide.
  • The Individual Gauges Rotate Freely On The Wire Cable For Fast Thread Verification.
Check Stock

53 Piece Rethreading Kit 19 Taps 32 Dies and 2 Thread Files Made in USA

  • Set Contains: 19 taps, 32 dies, of NC, NF and metric sizes and 2 thread files. Please see detailed set content in Product Description section below..
  • Ideal for restoring the stripped threads on old, rusty nuts and bolts.
  • Hex shape makes taps and dies easy to turn with any socket or wrench.
  • Can be used on national coarse, national fine and metric nuts and bolts.
  • Made in USA and Backed by Limited Lifetime Warranty against manufacturing defects.
Check Stock

Danco 80817 Home Washer Assortment, 42-Piece, Pack of 1, Black

  • COMPLETE HOME RUBBER WASHER REPAIR KIT: The Danco Home Washer assortment comes with the most popular and widely used washers and includes 42 pieces in various metric and inch standard sizes for your convenience.
  • RUBBER WASHERS - VARIED ASSORTMENT - Includes a varied assortment of washers ranging from faucet washers, hose washers, slip join washers, o-rings, sink strainer washers and bibb screws.
  • SMALL RED WASHERS - The small red washers are specialized for outdoor spigots.
  • DURABLE: The durable rubber construction will provide longevity and reliability and endure the rigors of everyday use.
  • REPAIR LEAKY FAUCET - Replacing worn-out washers on a faucet stem helps repair a leaky faucet and is an inexpensive alternative to replacing an entire faucet fixture.
  • FITS MOST REPAIRS - Most kitchen faucets or bathroom sinks that need repair will find a solution within this assortment.
  • WHAT'S INCLUDED - You will find a variety of: Size 0 beveled washers, 3/8′ x 8-32 Round head screws, 3/8′ x 10-24 Slotted screws, #8 O-rings, #12 O-rings, Round hose washer, Sink strainer washers, Type K slip joint washers, Type J friction washers, Type K friction washers, Tank bolt washers, 3/8′ Cone washers,1-1/2′ x 1-1/4′ Slip joint washers, 1R Ballcock washers, 7R Ballcock w....
Check Stock

KONDUONE DC66-00777A Pulsator Cap for Samsung Washer Replace # 3282678 5788799 AP5788799 PS8753312

  • ...DSW/A2-0001 WA52J8060AW/A2-0000 WA52J8060AW/A2-0001 WA52J8700AP/A2-00 WA52J8700AP/A2-0000 WA52J8700AW/A2-0000..
  • ✅[Replaces Part Number]: DC66-00777A 3282678 5788799 AP5788799 PS8753312, this cap is a direct replacement for dispenser on your Samsung washer. The Washer Washplate Cap fits over the washplate mounting bolt to protect the bolt and prevent clothing from catching on the washplate. Unplug your washer before installation. Please wear work gloves to protect your hands..
  • ✅[Buy with Confidence]: Order from KONDUONE, we offer LIFETIME WARRANTY, true worry-free shopping experience. If the cap ever fails on your Samsung washer simply contact us for a replacement and save money off of dealer prices..
Check Stock

Retisee 28 Size 4'' x 20'' Bolt and Nut Identifier Gauge Nut Black Bolt Size and Thread Identifier Thread Pitch Gauge Standard Inch and Centimeter Ruler

  • Easy to Identify: 28 size nut and bolt identification tool ruler is easy to distinguish between metric and inch thread sizes, and can verify the sizes and thread pitches of standard hardware, so you don't need to worry about the size of fasteners you have any more.
  • Metric Thread Sizes: -M4 x 0.7 -M5 x 0.8 -M6 x 1.0 -M7 x 1.0 -M8 x 1.0 -M8 x 1.25 -M10 x 1.0 -M10 x 1.25 -M10 x 1.5 -M12 x 1.25 -M12 x 1.5 -M12 x 1.75 -M14 x 1.5 -M14 x 2.0.
  • Bolt Size and Thread Gauge: bolt and nut identifier gauge measures the bolt length and nut diameter quickly, and identifies hardware from #6 to ½" and 4mm to 14mm.
  • Each size has internal thread for bolts and screws, as well as external thread for nuts and washers.
  • The thread gauge is about 4 x 20 inch, which has multiple mounting holes, so you can choose to put it on the workbench, fix it in the toolbox, or install it on the wall.
  • Double Scale: the bolt and nut identifier has inch and centimeter scales on the edge, so you can identify the length of nuts, washers, bolts and screws quickly.
  • Sturdy and Durable: the bolt identifier is made of ....
Check Stock

MIXPOWER 13-Piece 3/8-inch Impact Bolt & Nut Remover Set, Nut Extractor Socket, Bolt Remover Tool Set with Hex Adapter, Metric and SAE

  • 【Premium CR-MO】Made from premium impact grade chrome molybdenum steel with black phosphate finish..
  • 【Set Includes】13-Piece Impact Bolt and Nut Remover Set(Metric &SAE sizes )- 1/4", 5/16"(8mm), 3/8", 10mm, 7/16"(11mm), 12mm, 1/2", 13mm, 9/16"(14mm), 5/8"(16mm), 17mm, 11/16", 3/4"(19mm) & Knockout pin..
  • 【Application】This damaged nut bolt remover with corrosion protection are designed for the removal of damaged bolts, screws and nuts.It will provide your daily work more convenience in car repair, home decoration, for craft production etc..
  • 【Features】3/8” square drive for use with socket wrench or impact wrench. Spiral cut teeth provide positive grip, remove circular or damaged bolts. Can be driven with a metric spanner or socket..
  • 【Service Guarantee】All MIXPOWER Tools meet or exceed ANSI performance standards. It comes with 1 year quality guarantee..
Check Stock

fmix FiveMix Machine Screws M1.6 M2 M2.5 M3 Assortment 2100 Pcs Screw and Nut Assortment - Screw & Bolt Assortment Sets- Metric Screw Set - Bolt Kit Metric -Nuts and Bolts Assortment Kit (Silver)

  • All in one Pack: This metric nut and bolt assortment kit is ideal for door handles, the machinery industry, and other minor repairs around the shop, garage, and home furniture, including door handles, faucets, light fixtures, knobs, bicycle, locks, and toys.
  • as well as all types of precision machinery, classified instruments, electronic products, and household hardware appliances..
  • Simple to use: This assortment of flat cross screws sets and bolts includes several popular metric sizes, M1.6 M2 M2.5 M3 allowing you to easily and quickly replace a missing or broken set screw..
  • Convenient Storage: assorted in a plastic storage box, making it straightforward to store and carry..
  • Various Application: M1.6 M2 M2.5 M3 screws with corresponding small nuts and flat washers are suitable for multiple applications. The metric bolts and nuts assortment can be utilized for machine parts, hooks, and other metal components..
  • Safe and Eco-friendly: M1.6 M2 M2.5 M3 screws and nuts are composed of high-quality stainless steel that is non-toxic, mercury-free, and environmentally friendly. No hazardous compounds were used in the manufacturing of our products.
Check Stock