ReviewsMetric Pipe Fitting

boost/vacuum gauge silicone coupler adapter - Car Turbocharger Pipe Fitting Universal Turbocharger Silicone Boost Pipe Hose Nipple Turbo Vacuum VAC Gauge Fitting TDI

  • Wide Application---The turbocharger pipe fitting is suitable for a 4mm inner diameter pipe. 100% brand new aftermarket Boost Pipe Fitting that has never been used.
  • For Boost Gauge---This boost hose nipple fitting allows you to fit a boost gauge or any other type of instrument where vacuum or boost pressure is required.
  • Superior Quality Aluminum Alloy---The turbo boost pipe hose nipple is made of high quality aluminum alloy and durable to use. The manufacture of the fitting meets the strict quality requirements.
  • Easy Installation---The turbocharger mounting kit is easy to install, simply drill a 8mm hole in your silicone boost pipe and push the nipple through the hole (from the inside), put on the sealing o-ring, washer and tighten down with the nut.
  • Quality Assurance---As a professional seller, we provide high quality products and considerate services. Every product must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

  • Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
  • Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
  • Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
  • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
  • Thick formula fills gaps in large diameter pipe and loose fitting joints.
  • Recommended for potable water, pressure pipe, conduit and DWV.
  • Recommended application temperature 40°F to 110°F / 4°C to 43°C.
Check Stock

Sooprinse Pressure Washer Wand,Stainless Steel Quick Connect Lance,Replacement Spray Wand,16",5000PSI

  • ❤【High Pressure】5000 PSI high pressure power washer gun extension wand, brass fitting.ATTENTION：The end of the wand is M22 14. Make sure that the head of your pressure washer gun is this size. It can not be extended, the other end is 1/4 quick connection, mainly used to connect the nozzle..
  • ❤【Perfect Size】16 inches stainless steel replacement lance.
  • ❤【Quick Connect】1/4 inch stainless steel quick connect outlet fitting for easy attachment of spray tips and other accessories.
  • ❤【Widespread Use】Can be used on both gasoline and electric pressure power washers.Universal fit for metric pressure washers, hoses, M22 Metric thread inlet fitting.
  • ❤【Quality Assurance】With 3 years product warranty .Any problem,feel free to contact us.The professional team is always ready to serve you..
Check Stock

MuHize 15 Pieces 7/16-24 Threads Brake Line Fittings Assortment for 1/4” Brake Line Tube 5 Unions 10 Nuts

  • PACKAGE INCLUDE - MuHize upgraded Brake Line Fittings Replacement (Pack of 15): ① 5 x metric 7/16-24 threads unions.
  • Note：Both the unions and nuts is metric 7/16-24 threads (regular 1/4 inch tube fitting size). Please check before shopping!.
  • INVERTED FLARE UNIOn- Any 2 (1/4 inch) brake lines can be easy to joined with Muhize unions. both the sizes for unions and nuts are both 7/16-24 threads, which is the regular fitting size for 1/4 inch tube..
  • HIGHER QUALITY - MuHize brake line fittings are made of durable brass with unique rust corrosion proofing technology..
  • WIDELY APPLICATION - MuHize 7/16-24 threads fittings commonly fits for regular inverted flare/ double flare sizes for 1/4 inch brake lines tube..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. 100% brand new & made from excellent materials, and good contact..
Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

  • CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
  • CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
  • Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
  • To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
  • The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check Stock

Happybuy Swimming Pool Pump 2.5HP 1850W 148GPM Single Speed Filter for Spa Water Circulation Above Ground, 148 GPM / 1500W

  • [Large flow] swimming pool pump have advanced s-tek flow system for increased efficiency with continuous flow Rate of 448L/min..
  • [Thermal overload protection] This pump have a removable strainer basket with a built-in thermal overload protection – as the water circulate and passes through the filter..
  • [Application Scope] pool pump suitable for pools up to 80, 000 litters, ideal for residential and commercial swimming pools and spa’s..
  • [CONNECTION SIZE] ~ Inlet: 1. 57 inch internal and 2 inch external.
  • Note: the swimming pump comes with metric fittings, need to use hose fitting!.
  • Pipe Compatibility: Fit 1. 57 inch plumbing internally and 2 inch plumbing externally..
  • Outlet: 1. 57 inch internal and 2 inch external.
Check Stock

Brooklyn Pipe Flange - 16 Pack 3/4' Black Floor Flange Cast Iron Pipe Fittings | Our 3/4 Inch Pipe Flange | Industrial Pipe Flanges | Decorative Pipe Fitting Fit for Steampunk Furniture

  • 3/4 INCH FLOOR FLANGE - Our Brooklyn Pipe floor flange is a great choice for all your DIY needs. This decorative flange is the perfect pipe fitting to take your project to the next level. These fittings are for DIY projects only, they are not rated to carry gas nor water..
  • INDUSTRIAL DECOR- Our 3 hole black floor flange is 2.75" inches in diameter and provides a unique look for all projects. Whether you're looking for an industrial, steampunk, vintage, retro, factory look, our flange will fit perfectly into your project..
  • SUPPORT AMERICAN BUSINESS – Brooklyn Pipe is a small business headquartered in New York. We would really appreciate the opportunity to show you what makes Brooklyn Pipe the #1 top rated pipe fitting brand. We always go the extra mile for our awesome customers!.
  • NO CHINA STAMP - Our forged malleable iron flange doesn't have the word "CHINA" stamped into the flange which is another reason why Brooklyn Pipe stands out in the pipe fitting products that are on the market. Our 3 hole flange is just as strong as the competition but simply looks better!.
  • QUALITY CONTROL - We’ve partnered with world class steel factories and hire licensed inspectors to review our Brooklyn Pipe products prior to being packaged. Rest assured you are getting to....
Check Stock

4LIFETIMELINES Fitting Assortment 3/16 Metric Tube Nut Union Adapter 9 SKU

  • The Metric Fitting Assortment, 9 SKU (36 Fittings), contains nine most popular metric fittings (tube nuts, unions, and adapters) for use when working with braking systems of Japanese and European vehicles..
  • Fitting Assortments are designed for specialty and general repair shops. Each assortment contains a specific collection of fast moving fittings that should be kept on hand when working with automotive hydraulic braking systems..
  • Assortments are packaged in shatter-resistant, see-through plastic trays. Locator labels on the inside lid make locating, selecting, and re-filling quick and easy..
  • Works with steel, copper nickel, copper coated steel, PVF-coated, and stainless steel lines.
  • Lifetime warranty included on all products purchased from 4Lifetime Lines.
Check Stock

Rotary Breather Tube Set Fits B&S 692187 & 692189

  • ✅ Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT1 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the RT1..
  • ✅ Unlike traditional thread repair tools that come in standard sizes, the RT1 is an all-in-one tool that eliminates the need for switching when you’re working with both external and internal threads..
  • ✅ The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
  • ✅ Ideal for restoring Inch, Metric, Pipe, Male, and Female Threads made out of Metals, Hardened Metals, Ceramics, Glass, and Plastics, the RT1 has become the go-to thread repair tool for both home improvement enthusiasts as well as industry professionals..
  • ✅ Our US Patended and Engineered Rotary thread file is great for home projects, industrial, automotive, farm & ranch, and technicians. Purchase with peace of mind with our 24/7 friendly customer service..
Check Stock

PVC- 4 way L/T 2' (Furniture Grade White)

  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • All four outlets are non-threaded sockets.
  • 2" Fittings fit on 2" Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • Furniture Grade means this fitting has a non-marked, glossy finish..
Check Stock

1-1/2" 4-way Tee PVC Fitting Connector

  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • All four outlets are non-threaded sockets.
Check Stock