ReviewsMicro Blade Fuses

ASI PTF-76-10, 5 x 20 mm PCB Fuse Holder for Printed Circuit Board Mount, 15 mm Pin Spacing, No Center Pin, 10 Amp, 250V, UL (Pack of 10)

  • 【12v Inline fuse holder for standard blade fuses 】-Fuses holder kit including 12PCS 14 AWG inline fuse holders with 60PCS standard car fuses (2A,3A,5A, 7.5A)X5PCS+(10A,15A,20A,30A)X10PCS . The auto fuse size:19mm x 5mm x 18.5mm.14 Gauge Waterproof Pigtail In-line Fuse Holder can support fuses rating of 1A 2A 3A 4A 5A 7.5A 10A 15A 20A ATC/ATO blade fuse..
  • 【Good Conductivity&High-Temperature Resistance】-The Standard blade fuse holder made of tinned copper as a conductor to ensure good bending performance, refractory resistance and excellent electrical conductivity.Heavy duty 14AWG red power wire suitable for cars, trucks, Jeeps, boats,marine ATVs, UTVs, SUVs, etc. Adding circuit protection for car alarms,car recorder, GPS, dashboard camera, VCD player, etc..
  • 【waterproof rubber cap design】-This 14 Gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap,theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside ,your car and electrical device from short circuit..
  • 【Inline Blade Fuse Holder Easy Installation】This 12V-DC ATC/ATO TC/ATO in line fuse holder has long enough wire loop Length.
  • automotive fuse holder loop length: 11.8 inches / 30cm.Firstly,cutting the inline....
Check Stock

Favrison Micro Parallel Charging Board for Pico / PH1S / PH2S / XH2S Types Battery with XT60 Plug

  • ✈Brand new micro battery parallel charging board is compatible with Pico /PH1S /PH2S /XH2S Type Battery. It can Charge up to 9 batteries at the same time.
  • ✈PICO(JST1.25) for Blade Inductrix/Tiny Whoop/Blade mCX/E-flite Ultra/Blade Nano QX/UMX Radian.
  • PH1s for mCPX/Nano QX 3D and other batteries with 1S PH balance plug.
  • PH2S for E-flite UMX series and other batteries with 2S PH balance plug.
  • XH2S for Trex 150 batteries and other batteries with 2S XH balance plug.
  • ✈The circuit is protected by self-resettable polyfuses and your batteries will be protected in cases of wrong connection. Please note that these fuses may lead a higher IR readout of your batteries, but will not affect the cutoff voltage.
  • ✈LED light indicates conductivity. The melting current of each resettable fuse is 1.25A. The maximum total charge current equals 1.25A multiplied by the number of batteries.
  • ✈Favrison promises to provide high quality products for customers. All our items will be strictly tested before ship to customers. If you meet any problem or are not satisfied with the micro battery parallel charging board, please feel free to contact us and we will offer you the best service and 100% money back guarantee.
Check Stock

Standard Car Fuses,Assortment Blade Fuse for Auto Car Truck Standard Blade Fuse Replacement Kit 2A 3A 5A 7.5A 10A 15A 20A 25A 30A 40A with 1 Storage Case and 1 Fuse Extrator Standard Blade Fuse

  • ...ty, rated voltage 32V, transparent shell can quickly check whether the fuse is blown..
  • ▶ Easy Installation: Color-coded with carved amp rating on the top of the housing for quick confident identification, and easy installation, transparent housings for viewing link status and quick detection of a blown fuse. These blade fuses are clearly marked with amperage and color coded..
  • ▶ PACKAGE CONTENT: 55 Pieces standard fuses in total (5 pcs each size:2A/ 3A/ 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A/ 40A),different AMP in different color and AMP numbers carved on the fuse for easy recognition. The car fuses assorted can be easily identified by their color-coded plastic housings and the carved amp rating figures on the top..
  • ▶ Easy to Storage: All fuses are packed in a storage box to protect blade fuses,it is easy to carry and use. Storage box has locking snaps that will secure your fuses. These car fuses can protect the vehicle and electronic equipment from short circuit/overload, and effectively protect the circuit to prevent current overload..
  • ▶ Wide Application: This car auto fuses assortment kit is used for most vehicles(Cars, Truck, SUV, ATV, boats, motorcycles, home, industrial applications and so on,UTV, Camper RV, Motorcycles, etc). Support all mo....
Check Stock

Iglobalbuy Fuse Holder Box Block Holder 4 Way Circuit for Car Truck with 4 4 fuses (10A / 20A / 30A / 30A) + Protection Cover 12V/24

  • Brand new and high quality 4-compartment fuse box..
  • Automotive fuse box, suitable for middle-sized blade fuses..
  • Four way middle-sized blade fuses box with 4 fuses (10A / 20A / 30A / 30A)..
  • With transparent cover which help the fuse get away from dust and moisture..
  • Materials: Nylon and PC and brass. This construction make the fuse box very sturdy..
Check Stock

Bussmann NO.44 ATC Blade Fuse Tester/Puller Kit

  • It is complete with FT-3 fuse tester/puller.
  • It is reclosable, heavy-duty clamshell package.
  • Fuses meet or exceed OE and SAE standards.
Check Stock

Bussmann ATM-20 ATM Automotive Blade Fuse - 20 Amp, 5 Pack (Tin)

  • Atm Blade Fuses Are Widely Used On Import And Domestic Cars, Trucks, And Suvs.
Check Stock

Bussmann NO.43 ATM Mini Blade Fuse Tester/Puller Kit

  • Includes 42 Blade Type Fuses Of The 6 Most Popular Fuses.
  • Includes 7 Each Of The Following: Atm-5, Atm-10, Atm-15, Atm-20, Atm-25, Atm-30 & 1 Ft-3 Combination Fuse Tester/Puller.
  • It is complete with FT-3 fuse tester/puller.
  • It is reclosable, heavy-duty clamshell package.
  • Fuses meet or exceed OE and SAE standards.
Check Stock

[UL Listed] MulWark 242pc ClearMark Assorted Standard Auto Car Truck Blade Fuses Set- 2A 3A 5A 7.5A 10A 15A 20A 25A 30A 35A 40A -ATC/ATO+ATM Mini-Automotive-Blade-Fuse Assortment Kit w/A Puller

  • ...t fast-acting replacement spade fuses protect your vehicles, farm machines and electrical device/ electrical gadgets from short circuit, overload etc. They can be easily identified by their color-coded plastic housings, and the CLEAR WHITE MARK amp rating figures on the top.
  • ▲CONVENIENT DETECTION: The plug-in blade fuses are made from transparent PES with zinc alloy inserts and transparent housings for viewing the fuse link status and quick detection of a blown fuse.
  • ▲GREAT COMPATIBILITY: These assorted fuses are specifically designed for Cars, Trucks, SUVs, ATVs, UTVs, Camper RV, Motorcycles, Fleet, Golf Car, Boat, snowmobiles, and most general DC applications etc., covering such components as radio, light, turn signals, etc. This set comes with 132pcs small blade fuses and 110pcs standard blade fuses, all essential for every American household that owns more than one car..
  • ▲EXPLICIT DIAGRAM: A diagram inside the storage box case corresponds to every compartment with labels so you know what size each fuse is and where to get it in the box.
Check Stock

MGI SpeedWare 14AWG Inline Fuse Holder Harness with 15AMP ATC ATO Blade Fuse (2-Pack)

  • SUPERIOR PROTECTION — 14 gauge copper wire and blade fuse.
  • VERSATILE — Designed for 12-24vDC ATO/ATC blade style fuses for use in cars, trucks, boats and more..
  • WEATHERPROOF — Tight fitting water-resistant cap protects fuse from dust and moisture.
  • EASY TO USE — Simply connect the inline fuse holder between your power source and load.
  • Package includes 2 x 14 gauge fuse holders, 2 x 15 amp blade fuses.
Check Stock

Blue Sea Systems 5026 ST Blade Fuse Block 12 Circuit with Ground and Cover

  • Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits.
  • Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer.
  • Positive distribution bus with #10-32 stud.
  • Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements and has a push button latch that is easy to open.
  • Accepts ring or spade type terminals and ATO/ATC fast acting blade fuses - fuses sold separately. Includes 20 write on circuit labels.
Check Stock

BUNKER INDUST 10-Way Fuse Box Blade Fuse Block Holder with LED Indicator for Blown Fuse Waterpoof Protection Cover for Car Boat Marine Automotive,Include 20Pcs Blade Fuses and 1Pcs DIY Sticker

  • LED INDICATOR FOR BLOWN FUSE---Each circuit has red LED warning indication.If a fuse blows,the red LED next to the problem fuse will illuminate,allowing you easily identify and replace blown fuses immediately without guessing!.
  • 1 POWER CONNECTION/10 CIRCUIT OUT---Maximum of 30 Amp per circuit & 100 Amp per panel.4-Way Blade Fuse Box can interchangeable or compatible with all automobiles and devices equipped with a 10-33 Volt DC power source..
  • FUSE PROTECTION COVER---A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.Easy to operate, splash and dust-proof design..
  • HEAVY DUTY CONSTRUCTION---This fuse panel has a #10-33 stud for power feed, 250” male quick disconnect terminals, and can take an input voltage of 10 – 33 V DC..
  • PACKAGE INCLUDE---1Pcs 10-Way Fuse Box Holder,1Pcs DIY Sticker,20Pcs Blade Fuses: 5A x 2, 10A x 4, 15A x 4, 20A x 6,30Ax 2,40Ax 2. Note: This box holder is suitable for standard blade fuses(ATO/ATC).Please check the size or shape of fuse before purchasing..
Check Stock