ReviewsMicro Jst 2connector Kit

Blomiky 2 Pack 7.4V 1200mAH Lipo Battery Pack with JST Plug and Charger for UDIRC UD1601 UD1602 Pro Fisca Cheewing 1/16 Scale 20MPH 30KM/H RC Truck X6 Battery and USB 2

Discharge plug:Red JST connector, plug end cross-section size:5.55*3.0mm/0.218*0.13inch. 7.4V 1200mAh lipo rechargeable battery fit for Huina 1592....
Battery dimensions:: L66.6*W30*H15.3mm/2.62*1.18*0.6inch . Weight:63G. 7.4V 1200mAh Lipo rechargeable battery fit for Laegendary 1:14 scale 22 Channel....
7.4V 1200mAh JST Lipo rechargeable battery fit for YiZhan X6 RC Quadcopter Drone Aircfaft, 7.4V 1200mAh JST battery replaced for Cheerwing 1:16 2.4Ghz....
7.4V 1200mAh JST lipo battery with JST plug fit for WLtoys V262 V333 V353B V666 Q212,JJRC H40WH H40 H26 H26HW,MJX X101 X102 RC Quadcopter Drone,UDI....
7.4V 2S USB charging cable have IC protection circuit and Indicator light. green light is blink when charged, green light stop blink after full....

Check Stock

3 pcs 7.4V 2S 200mAh 20C LiPO Battery JST Plug and USB Charger for RC Scale 1/36 Model Buggy Truck F3P Indoor Micro Aircraft

Battery Size:37 x 19 x 11mm ,Battery Weight: 14 gram.
Volt: 7.4V,Capicaty :200Mah,Upgrade Version.
RC scale 1/36 Model Buggy Truck F3P Indoor micro aircraft.

Check Stock

Blomiky 2 Pack 7.2V 900mAh 6 Cell AA Nicd Rechargeable Battery with Red JST Plug and USB Charger Cable for New Version TR-211 TR-215 550 15 Channel RC Excavator 550 Battery 2

Connector plug:Red JST connector, plug end cross-section size:5.55*3.0mm/0.218*0.13inch. Plug red cable pin is positive, black cable pin is negative.....
Battery dimensions:L3.37*1.97*0.57 inch. weight:105gram/3.7oz. Battery capacity:900mAh. Spare part number:TR-212-B. Replace parts fit for TR-212....
7.2V 900mAh Nicd rechargeable JST battery fit for TongLi 573 TopRace TR-212 1:14 Scale RC Dump Truck and TEMA1985 15 Channel RC Excavator Toys.
7.2V 900mAh Nicd rechargeable JST battery fit for new version TOPRace KKNY KKNY 15 Channel 1/14 Scale Remote Control RC Excavator and Toprace TR-211.
7.2V 900mAh Nicd rechargeable JST battery fit for Remote Control RC Excavator new version Fisca Fistone 15 Channel RC Excavator Construction Truck..

Check Stock

2Pairs Vgoohobby 10CM JST Plug to JR Connector Male Female Cable Servo Adapter Wire for RC Plane Helicopter Car

Package includes 2Pairs JST to JR Male Female cables,suitable for most mini RC helicopter and indoor 3D plane,also can be used to RC car truck for winch,lights,motor cooling heatsink fans which powered by receiver..
2PCS Male JST to Feamle JR Cable and 2PCS Female JST to Male JR Cable.A great parts for DIY RC toys..
Great for small Lipo and NiMh connection..

Check Stock

T-Power Ac Dc Adapter Compatible for Turnigy Accucel 6 Lipo A123 NiMH NiCd (50w 6a - only) Replacement Switching Power Supply Cord Charger Wall Plug Spare

T-Power (TM) Made with the highest quality / Input Voltage Range: AC 100V - 240V / OUTPUT : 12V DC 60W ( DC 11.0~18.0V compatible ).
Compatible With: Turnigy Accucel 6 Lipo A123 NiMH NiCd / Turnigy Accucel-6 50W 6A Balancer Charger LiPo LiFe NiMh NiCd JST-XH / ((King HKC6, HobbyKing 50watt 5A X-Charger/Balancer, and HobbyKing ECO6 50W 5A Channel Well Technology (CWT) for Turnigy Model: CAD060121 (newer version of PAA060F)) Tenergy TB6AC 50W/5A AC/DC Dual Power Balancing Tenergy B450AC 45W AC/DC Compact Balance.
Tenergy TB6AC 50W/5A AC/DC Dual Power Balancing Tenergy B450AC 45W AC/DC Compact Balance.
Compatible With: SKYRC iMAX B6 Mini Professional Skyrc Imax B6 Professional Rapid Lipro SKYRC iMAX B6AC V2 Dual Power (50Watts) LiPo,LiHV,LiIon,LiFe,NiCd,NiMH,Pb SkyRC Quattro 1S Lipo Micro Battery Charger ( FOR Micro/Micro Reverse/MX/mCPX ) Compatible With: SKYRC iMAX B6AC V2 Dual PoweriMAX B6AC Version 2 Digital LiPo LiIon LiFe GoolRC B6 Mini Professional Balance Charger/Discharger for LiPo Lilon LiFe NiCd NiMh Pb RC Battery.
❌ ((( NOTE ! THIS ITEM WILL NOT FIT : 80W Accucel 6 Digital charger High Power (80W) 10a ))).

Check Stock

BETAFPV 4pcs 0802SE 19500KV Brushless Motors FPV RC Motors for 1S Brushless Micro Whoop Drone

【Wire connection】Using ball bearing, its motion is more smooth and more durable. The lead wire soldered with the PCB, which allows customer to....
【Compatible Drone】The 0802 1950KV brushless motor is customized for Beta65X, which supports 2S brushless whoop drones. It is powerful and....
【Props&Frames】BETAFPV 0802 19500KV 2S brushless motor is suitable for 31mm 3 or 4 blades propellers with 1.0mm shaft hole and brushless frames....
【Weight&Cable】Only weighs 2.03*g/pc with 35mm Micro JST-1.25 3-Pin connector. Supports 7.4V voltage.
【Support】If you have any technical support needed please feel free to contact us..

Check Stock

BETAFPV 4pcs 1103 8000KV Brushless Motors 3S Motor for Beta75X 3S Brushess Micro Quadcopter Brushless Whoop Drone

【Compatible quadcopter】Suitable for most 3S whoop drone on the market, especially recommended for updated Beta75X 3S Whoop drone.
【Powerful and reliable enough】Customized for 3S lipo battery, highest speed increased obviously with this motor. It will give you an extreme power....
【Weight & Size】Light weight only 3.8g/pc with size 13.5*13.5*16.3mm. Easy to install with the Micro JST-1.25 3 pin plug.
【Multiple props optional】Fit for 1.2"-2" propellers, like 1735,1935, 2030, 3020 propellers.
【High quality cables】Thicker cable is not easy to break off, specially lengthened motor wires is suitable for toothpick drones.

Check Stock

ShareGoo 4PCS JST Plug Splitter,JST Male Female Y Cable,JST Y Parallel Adapter Splitter Harness for Traxxas TRX-4 1/10 RC Car Crawler ESC Battery Motor Cooling Fan,15CM/5.9"

Package includes 4PCS JST Y Cable.These are 1 Male to 2 Female Y Harness,1 Male to 3 Female Y Harness,1 Female to 2 Female Y Harness,1 Female to 3 Female Y Harness.They are special for Traxxxas car,alao can used for HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC car..
The Male to Female Y Harness(Dual Fan Wiring Harness)can allows use of 2 cooling fans,Plug the JST male connector on your receiver,then you can connect the 2 cooling fans on the JST Female connector,also can run the the other part which are in JST male plug,such as lights,winch..
The Female to Female Y Harness are used for TRX-4 ESC,it alows to be powered by TRX-4 ESC and run the the lights,winch, cooling fan at the same time..
Also can be used on most mini RC helicopter and indoor 3D plane,great for small Lipo and NiMh connection..

Check Stock

Micro Connector Pin Crimping Tool, Yangoutool Micro Ratcheting Crimper 32-20AWG for D-Sub,Open Barrel suits Molex,JST,JAE

Suitable for micro connector pins,capacity range 0.03-0.52mm /32-20AWG.
Only one time crimp needed : Double-layer jaws crimps conductor and insulation sheath simultaneously.
Wire Electrical discharge machining(EDM) Cutting jaw can make sure the surface of the jaws are smooth to avoid the terminals be stucked and offer excellent crimps.
Easy to operate with well-made ratchet mechanism and light environment-friendly handle made of TPR.
Suits Molex CLIK-Mate,Molex PicoBlade,JST SHD,JAM,TYCO D-100,etc..

Check Stock

iFlight 4pcs XING Nano 0802 22000kv FPV Micro Motor for 60-70mm Tinywhoop Drone Like as iFlight A65 Brushless Indoor Micro Drone

‒ XING Nano 0802 22000KV motors are suitable for 1S brushless drone - iFlight a65 whoop.
‒ Perfect for indoor high-speed flying, the power of 22000kv motors are obviously improved with the flight time of 2:40mins..
‒ Shaft diameter is 1.0mm, come with Micro JST-1.25 3-pin connector, convenience for installation.
‒ Recommended parts: iFlight a65 frame,SucceX F4 1S 5A AIO Whoop Board,31mm 4blade propeller.
‒ Package included: 4x XING NANO X0802 Brushless Motor , 4x Motor Screw Pack..

Check Stock

Arcity 20 Pcs Arcade Button Wires Harness Cable for Zero Delay USB Encoder PCB with 0.187 4.8mm Terminals Compatible with Micro Switches HAPP Style Arcade Buttons Joysticks New

20 Pieces Arcade Wires for Zero Delay Arcade USB Encoders,Compatible with All Arcade Buttons and Joysticks with Micro Switches..
A useful tool for your DIY arcade project..
One side is JST XH2.45 Male Connection plug, the other side are 0.187 inch(4.8mm) terminals plug for arcade buttons / arcade joysticks..

Check Stock