ReviewsMicro Machined Components

KastKing ReKon Line Counter Trolling Fishing Reel,Round Baitcasting Reels,Size 20,Left Handed

  • ... Salmon, Steelhead, Trout, Kokanee, Walleye, Lake Trout, saltwater species, and so much more. Both feature an exceptional, accurate mechanical line counter so that you can consistently keep your bait in the exact zone that is producing fish over and over..
  • HIGH PERFORMANCE COMPONENTS – The KastKing ReKon baitcasting reels are designed for tough trolling conditions and uses the best components. For smooth and trouble-free operation KastKing uses 3 double shielded, stainless-steel ball bearings in high stress points plus the Instant anti-reverse bearing. KastKing ReKon main gears and worm shafts are made of precision machined brass. Its pinion gear and line guide shaft are high quality stainless-steel..
  • AMAZING DRAG POWER & FEATURES – The ReKon Line Counter round casting reels use a smooth, carbon disc drag that delivers 30 lbs of fish stopping power (25lb for size 10). Both size reels have a line clicker function that makes releasing planer boards simple and easy. You can use that feature as a strike detection system while trolling. Gear ratio is 5.1:1 on the size 10 and 5.3:1 on the size 20..
Check Stock

JET PUMP 1HP VERT MULTI

  • Motor windings – superior insulation materials protect against excessive moisture and contaminants to ensure prolonged motor life.
  • Automatic pressure regulator – faster-acting and quieter, design eliminates “hunting” for correct drive pressure. New improved stem and guide are precisely molded to assure efficient, trouble-free performance on all deep wells.
  • Dustproof cover – all electrical components are protected from dirt, dust and insects by a dustproof canopy.
  • Ventilating air cannot contaminate vital switching components, this eliminates the most common cause of motor failure.
  • Quality construction – precision-machined, close-grained cast iron pump body and base are specially treated to resist corrosion.
Check Stock

CRKT Provoke Compact: Kinematic EDC Folding Pocket Knife, Morphing Karambit, D2 Plain Edge Blade, Aluminum, Pocket Clip, 4045

  • EDC Grail: The road to EDC perfection ends at the LionSTEEL SR22 with Aluminum handles. A lightweight masterpiece fit equally for everyday use or collector’s shelves, Sleipner Steel blade, machined Aluminum handles, quality Italian craftsmanship.
  • 4D Machined Handles: Manufactured using LionSTEEL’s exclusive SOLID knife technology, the SR22 features handles machined from a single piece of Airspace Grade Aluminum, maximizing strength while minimizing weight..
  • Sleipner Steel Satin Blade: Sleipner steel blade boasts high hardness and excellent resistance to wear and chipping, with an integrated flipper tab for easy and safe opening deployment..
  • Refined Finish: Exclusive IKBS ball bearing system to facilitate easy opening and closing, Rotoblock safety system integrated frame lock, dual carry clip with integrated carbide tungsten glassbreaker for emergencies..
  • Italian Craftsmanship: Made in Italy by world class knife makers, LoinSTEEL is the incomparable combination of harmony of forms and functionality of use. Highest quality components fit for specific use, hand assembled..
Check Stock

SureFire HL1-C-TN Helmet Light, 3V, 1.4-19.2 lu, Rd/WH/IR LEDs, Tan

  • SureFire aluminum-body Illumination tools are Machined from a high-strength aerospace aluminum alloy.
  • Polymers are durable, lighter in weight than aluminum and are more comfortable to hold in cold weather.
  • Aluminum oxide is the second-hardest substance known to man, exceeded only by Diamonds.
  • SureFire multi-axis computer numerically Controlled (CNC) lathes ensure precision-machined components.
  • SureFire uses integrating sphere photometers to measure the total lumen output of our Illumination tools.
Check Stock

SureFire HL1-B-TN Helmet Light 3V 1.4-19.2 lu IR/WH/IR LEDs Tan

  • SureFire aluminum-body Illumination tools are Machined from a high-strength aerospace aluminum alloy.
  • Polymers are durable, lighter in weight than aluminum and are more comfortable to hold in cold weather.
  • Aluminum oxide is the second-hardest substance known to man, exceeded only by Diamonds.
  • SureFire multi-axis computer numerically Controlled (CNC) lathes ensure precision-machined components.
  • SureFire uses integrating sphere photometers to measure the total lumen output of our Illumination tools.
Check Stock

SureFire HL1-D-TN Helmet Light 3V 1.4-19.2 lu IR/Yg/IR LEDs Tan

  • SureFire aluminum-body Illumination tools are Machined from a high-strength aerospace aluminum alloy.
  • Polymers are durable, lighter in weight than aluminum and are more comfortable to hold in cold weather.
  • Aluminum oxide is the second-hardest substance known to man, exceeded only by Diamonds.
  • SureFire multi-axis computer numerically Controlled (CNC) lathes ensure precision-machined components.
  • SureFire uses integrating sphere photometers to measure the total lumen output of our Illumination tools.
Check Stock

POWERTEC 71392 Trim Router Table

  • Bundle Includes: JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5" Diameter Motors and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems.
  • Compatibility: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors.
  • Double-Sealed Ball Bearing: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.
  • Lift Shafts: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.
  • Sturdy Construction: All the machined components on the Rout-R-Lift II are CNC machined for durability.
Check Stock

Sougayilang Trolling Reel, Level Wind Fishing Reel, Conventional Reel for Salmon-3000 Right Handle

  • ...ayilang kept these fishing reels as compact as possible while still providing tons of line capacity to anglers using leadcore, heavy braid, or strong monofilament fishing line. The size 30 TSSD cast reel will hold over 280 yards mono of 25 lb. The size 40 TSSD cast reel will hold over 440 yards mono of 25 lb..
  • Tough Components – Sougayilang conventional reels have the best components for tough trolling & bottom fishing conditions. For smooth, trouble-free saltwater fishing, Sougayilang uses 3 stainless-steel ball bearings. Japanese precision machined brass main gear and a stainless-steel spool plus stainless-steel guide shaft make this conventional fishing reel powerful, durable and reliable..
  • We are confident to say that you can trust our super strong fishing reel since we are not only control the production and material selection process, but also have perfect after-sales service (refund/replacement)..
Check Stock

JEGS Block/Head Dowel Pins | Fits GM/Chevy LS Series Engines (4.8, 5.3, 5.7, 6.0 Liter) Made in the USA | Machined from Tube Stock | 2 Per Package | Steel

  • PRECISION MACHINED and offers accurate alignment.
  • PRECISE POSITIONING PREVENTS LEAKS and keeps your engine efficient.
  • MACHINED FROM steel tube stock, not rolled sheet metal.
  • MADE IN USA with high quality components and assembly.
Check Stock

Scalarworks SYNC Light Aimpoint Micro Mount Compatible with Benelli Guns

  • AIMPOINT MICRO LOW MOUNT: an ultimate optic mounting solution for Benelli's tactical guns.
  • LIGHTWEIGHT & EASY TO INSTALL: the optic mount weighs in at just 0.69 ounces and can be attached with 4 screws.
  • COMPATIBLE: with Aimpoint Micro T-2, H-2, T-1, H-1 optics.
  • FITS: The Sync is compatible with all factory drilled and tapped Benelli guns, as well as most other guns with some gunsmithing.
  • DURABLE: machined from ultra high-strength 7075-T6 Aluminum. WARRANTY – lifetime.
Check Stock

S&S Cycle S&,S Cycle Super Stock Cylinder Head Kit

  • High port flow gives great performance now, and more later when additional upgrades are done.
  • Heads are fully assembled with springs and valves, and are available in silver or black powder-coat finish to match OEM components.
  • Compression ratios vary depending on cylinder heads chosen, pistons used and engine displacement.
  • Heads are machined for compression releases (sold separately).
  • S&S rocker boxes required when using S&S compression releases.
  • Do not include rocker arm components, intake manifold, gaskets or headbolts (requires eight long OEM length head bolts).
Check Stock