ReviewsMicro Machining

IWISS IWS-3220M Micro Connector Pin Crimping Tool 0.03-0.52mm² 32-20AWG Ratcheting Crimper for D-Sub,Open Barrel suits Molex,JST,JAE

Ideal for micro connector pins with capacity 0.03-0.52mm² 32-20AWG.
Typical parallel crimping type ensures stability and power equality and improves 30% of the crimping-tightness.
Double-layer Wire Electrical discharge machining(EDM) Cutting jaw crimps conductor and insulation sheath simultaneously.
Easy to operate with well-made ratchet mechanism and light environment-friendly handle made of TPR.
Suits Molex CLIK-Mate,Molex PicoBlade,JST SHD,JAM,TYCO D-100,etc.

Safe material: PCB drill bits are made of quality tungsten steel, not easy to wear and bend.
The anti-vibration design of the blade makes it stable and reliable during the engraving process.
Improve precision: micro drill bits set adopts pointed cutting edges.
The spiral cutting edge can reduce the cutting force, prevent the drill from breaking, and improve the machining precision, no burrs or debris.
Size information: PCB drill bit set contains various sizes of drill diameter, 0.3 mm/ 0.012 inch, 0.4 mm/ 0.016 inch, 0.5 mm/ 0.020 inch, 0.6 mm/ 0.024 inch, 0.7 mm/ 0.028 inch, 0.8 mm/ 0.032 inch, 0.9 mm/ 0.035 inch, 1 mm/ 0.039 inch, 1.1 mm/ 0.043 inch, 1.2 mm/ 0.047 inch, each size has 3 pieces, totally 30 pieces in 3 boxes.
Wide usage: 0.01-0.05 inch drill bits set is suitable for processing precision drilling of amber beeswax, circuit boards, CNC engraved jewelry, hardware, plastics and so on.
What you get: package comes with 30 pieces tungsten carbide micro drill bits in 3 sets, 10 pieces each set, packed in a box, which is easy for storage.

Full 3 way adjustment with one screw to easily adjust a warped door or a twisted cabinet problem.
Frame and door machining required - Great for upgrading old hinges without having to make new doors.
Use bit (AWM5R) for the door machining and (AWM5AJ) for the face frame machining.

Full 3 way adjustment with one screw to easily adjust a warped door or a twisted cabinet problem.
Frame and door machining required - Great for upgrading old hinges without having to make new doors.
Use bit (AWM5R) for the door machining and (AWM5AJ) for the face frame machining.

AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
End Mill router bits are used for side milling, end milling, finish machining, etc..

Full 3 way adjustment with one screw to easily adjust a warped door or a twisted cabinet problem.
Frame and door machining required - Great for upgrading old hinges without having to make new doors.
Use bit (AWM5R) for the door machining and (AWM5AJ) for the face frame machining.

Full 3 way adjustment with one screw to easily adjust a warped door or a twisted cabinet problem.
Frame and door machining required - Great for upgrading old hinges without having to make new doors.
Use bit (AWM5R) for the door machining and (AWM5AJ) for the face frame machining.

Package Included: 5pcs 1/2" carbide square end Mill.
Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel..
Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance..
HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron..
Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining..

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..

Machining: Copper And Aluminum Medium Finish Machining.
Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..

【High Quality Material】 The product is made of high-quality high-speed steel materials, double-edged, standard milling angle of 60 degrees, durable..
【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and can be used with confidence..
【Precision Machining】Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts..
【Lathe Mill Center】The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating..
【Quality Service】 We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..