ReviewsMicro Motor Driver

LAFVIN 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • Stepper motor with a standard interface..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board，With convenient use, direct docking.
  • Package Content: 5 set 28BYJ-48 Stepper Motor + Uln2003 Driver Board +20pcs female to male Dupont cable (as a gift).
Check Stock

Makita XT267T 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 5.0Ah ,

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL motor delivers 1,090 in.Lbs. Of max torque.
  • Variable speed impact driver (0-3,400 RPM & 0-3,600 IPM) with BL motor delivers 1,500 in.Lbs. Of max torque.
Check Stock

POPULO Impact Driver Kit 1770 in-lbs 20V Max Lithium Ion Cordless 1/4 Hex Impact Drill 39 Piece S2 Impact Drive Bits,0-2900RPM Variable Speed 2.0 Ah Li-ion Battery,Fast Charger.

  • 4 POLE MOTOR & 1,770 IN-LBS TORQUE - Our compact 4 pole motor provides higher efficiency, has double work output than a regular brushed 2 pole motor,....
  • VARIABLE SPEED & REVERSE CONTROL - The speed of the impact driver can be adjusted from 0 to 2900 RPM by the amount of trigger force. The variable....
  • ¼” QUICK RELEASE CHUCK, BUILT-IN LIGHT, BELT CLIP - Compact (6”) and lightweight (2.68 lbs - bare tool) design fits into tight areas and....
  • LITHIUM ION TECHNOLOGY & 20V MAX - Power up for a longer runtime, no memory and more compact and lighter, much convenient than the corded. Battery....
  • ULTIMATE ACCESSORIES SET -  Impact Driver, 1" Impact Driver Bits (20Pcs), 2" Impact Driver Bits (6Pcs), 2" Regular Driver Bits (2Pcs), Sockets....
Check Stock

Makita XPT02Z 18V LXT Hybrid Brushless Impact Driver

  • Hybrid 4-function tool with impact, hammer, driver and drill all in one.
  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Hammer Driver-Drill mode features variable 2-speed operation (0-700 & 0-2, 700 RPM) (0-8, 400 & 0-32, 400 BPM).
Check Stock

TIMPANO TPT-D3200TI-ND 2″ Exit Neodymium Titanium Compression Driver for High Output, Frequency Response from 1,600 to 19,000 Hz

  • Power You Can Rely On: The high energy motor is also response for output up to 110 dB with only one watt of input power.
  • New Technology: A neodymium motor focuses magnet flux into the gap while keeping driver weight below 3.92 pounds.
  • Designed for Efficiency: Compression horn driver uses a neodymium ring motor design to pack as much BL product into the voice coil gap as possible.
  • Solid Structure: When combined with the titanium dome diaphragm, to produce crisp sound over a broad range (from 1,200 to 18,000 Hz) with an emphasis on the critical mid range high range.
  • Quality You Can Trust: Choose Timpano’s D3200TI-ND titanium compression driver for a high output compression driver to be used for the critical mid range high (vocals).
Check Stock

Makita XT269T 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 5.0Ah

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" Hammer Driver-Drill (0-500 & 0-2, 000 RPM) with BL Brushless motor delivers 530 in pounds. Of max torque.
  • Variable speed impact driver (0-3, 400 RPM & 0-3, 600 IPM) with BL Brushless motor delivers 1, 500 pounds of max torque.
Check Stock

6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • ❃❃ The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable..
  • ❃❃ Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in).
  • ❃❃ A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • ❃❃ 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking..
  • ❃❃ Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift)..
Check Stock

DEWALT 20V MAX* Finish Nailer, Angled, 15GA (DCN650B)

  • This cordless finish nailer is 100% battery power eliminates need for a compressor, hose or costly gas cartridges.
  • Brushless motor of 15 gauge finish nailer maximizes runtime and durability.
  • Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC628).
  • Tool-free selectable trigger for sequential or contact actuation modes.
  • Tool-free depth adjustment for precise countersinking of nails.
  • Tool-free jam release to quickly and easily clear nail jams.
  • Multi-functional LED lights help to provide both workspace illumination and tool diagnostics.
  • Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall.
  • Adjustable belt hook for left or right attachment depending on user preference.
  • Inline magazine provides easy use in multiple orientations and in tight spaces.
Check Stock

HiLetgo L298P DC Motor Drive Module L298P DC Motor Drive Shield H-Bridge Drive Expansion Board High-Power DC Stepper Motor Controller for Arduino

  • Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input..
  • The L298P shield DC motor driver has PWM speed control mode.
  • Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A..
  • Stack design can be directly plugged into the Arduino, easier to use..
Check Stock

DEWALT 20V MAX* XR Finish Nailer, Cordless, Straight, 16GA (DCN662D1)

  • This cordless finish nailer is 100% battery powered. Eliminates the hassle of using gas, compressor, and hose.
  • Brushless motor maximizes runtime and durability.
  • Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC616).
  • Tool-free selectable trigger for sequential or contact actuation modes.
  • Tool-free depth adjustment for precise countersinking of nails.
  • Tool-free jam release to quickly and easily clear nail jams.
  • Multi-functional LED lights help to provide both workspace illumination.
  • Integrated tool-free stall release lever to reset the driver blade in the event of a stall.
  • Adjustable belt hook for left or right attachment depending on user preference.
  • Compatible with all DEWALT 20V MAX* batteries.
Check Stock

Makita XT269M 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 4.0Ah Blue

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" Hammer Driver-Drill (0-500 and 0-2,000 RPM) with BL Brushless Motor delivers 530 in.lbs. of Max Torque.
  • Variable speed Impact Driver (0-3,400 RPM and 0-3,600 IPM) with BL Brushless Motor delivers 1,500 in.lbs. of Max Torque.
Check Stock