ReviewsMicro Thrust Bearings

labwork Lower Power Steering Column Coupling Shaft Universal U Joint Assembly 4713943 Replacement for Jeep Cherokee 1988-1994

  • Cylindrical bearings have a load capacity more than 5 times greater than ball bearings.
  • The Eternal Fix is the only Permanent fix on the market.
  • Avoid ball bearing solutios on the market.
Check Stock

Bettomshin 2Pcs 51100 Thrust Ball Bearings with Washers 10mm Bore 24mm OD 9mm Width GCr15 Thrust Bearing for Wind Spinners Slicers CNC Retrofits

  • 【Parameter】Type: Thrust Ball Bearing.
  • 【Material】Made of GCr15, durability and resistance to deformity under loads, have great wear-resistant, high temperature resistance and high hardness..
  • 【Capability】High precision, fast speed, long life, uniformly load distributed, can withstand high thrust loads. They incorporate logarithmic roller and raceway profiles with a optimized surface finish for ultimate roller to flange contact..
  • 【Features】The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time..
  • 【Applications】Can be used for jack, pump, rotating applications, machine tools ect..
Check Stock

MEETOOT 6 Sets Thrust Needle Roller Bearings NTA1220+2TRA Thrust Needle Roller Bearing with Two Washers 3/4

  • The needle roller thrust bearing can only bear axial load in one direction.
  • Used in combination with two thrust washers for applications where adjacent machine components cannot be used as raceways.
  • Steel cage guide rail and evenly distributed rollers to reduce friction, vibration and noise.
  • The hardened chromium steel roller has heat resistance and durability under heavy load.
  • Rolling bearings are widely used, ranging from agricultural machinery to conveying equipment, robots, elevators, rolling mills, rudder shafts and aggregate crushers.
Check Stock

DNJ EK213 Engine Rebuild Kit for 1996-2001 / Acura/Integra / 1.8L / DOHC / L4 / 16V / 1834cc / B18B1

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer.
  • FITS: 96-01 Acura / Integra 1.8L L4 DOHC Naturally Aspirated B18B1.
  • FITMENT NOTES: w/o Oil Pump & Timing Belt Or Timing Kit.
  • You are assured to receive a worldwide proven Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

DNJ EK224 Engine Rebuild Kit for 1998-2001 / Honda/Prelude / 2.2L / DOHC / L4 / 16V / 2156cc / H22A4

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer.
  • FITS: 98-01 Honda / Prelude 2.2L L4 DOHC Naturally Aspirated H22A4.
  • FITMENT NOTES: w/o Oil Pump & Timing Belt Or Timing Kit.
  • You are assured to receive a worldwide proven Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

DNJ EK954 Engine Rebuild Kit for 2005-2015 / Toyota / 4Runner, Tacoma / 2.7L / DOHC / L4 / 16V / 2694cc / 2TRFE

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer, Freeze Plug Set (Brass), Piston Pin Bushings.
  • FITS: 05-15 Toyota / Tacoma, 4Runner 2.7L L4 DOHC Naturally Aspirated 2TR-FE.
  • FITMENT NOTES: w/o Oil Pump & Timing Belt Or Timing Kit.
  • You are assured to receive a worldwide proven Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

FreeTec Universal Press and Pull Sleeve Kit Bushing Bearings and Seals Removal Installation Kit

  • 26pc Universal Press and Pull Sleeve Kit For the removal and installation of bushes / bearings and seals etc..
  • Fully universal applications on both cars and LCV.
  • Contents - 22 x Press Sleeves Inside Diameter from 34-72mm in 2mm steps Outside Diameter from 44-82mm in 2mm steps 4 x Pulling Spindles with nuts and thrust bearings M10. M12. M14. M16..
  • Supplied in heavy duty moulded storage case.
Check Stock

DNJ EK213M Master Engine Rebuild Kit for 1996-2001 / Acura/Integra / 1.8L / DOHC / L4 / 16V / 1834cc / B18B1

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer, Timing Belt, Oil Pump.
  • FITS: 96-01 Acura / Integra 1.8L L4 DOHC Naturally Aspirated B18B1.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit.
  • You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

DNJ EK224M Master Engine Rebuild Kit for 1998-2001 / Honda/Prelude / 2.2L / DOHC / L4 / 16V / 2156cc / H22A4

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer, Timing Belt, Timing Belt Balance Shaft, Oil Pump.
  • FITS: 98-01 Honda / Prelude 2.2L L4 DOHC Naturally Aspirated H22A4.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit.
  • You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

DNJ EK297A Engine Rebuild Kit for 1996-2000 / Honda/Civic, Civic del Sol / 1.6L / SOHC / L4 / 16V / 97cid / D16Y7

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer.
  • FITS: 96-00 Honda / Civic, Civic del Sol 1.6L L4 SOHC Naturally Aspirated D16Y7.
  • FITMENT NOTES: w/o Oil Pump & Timing Belt Or Timing Kit.
  • You are assured to receive a worldwide proven Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

DNJ EK900 Engine Rebuild Kit for 1985-1995 / Toyota / 4Runner, Celica, Pickup / 2.4L / SOHC / L4 / 8V / 2366cc / 22R, 22RE, 22REC

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer, Freeze Plug Set (Brass), Piston Pin Bushings.
  • FITS: 85-95 Toyota / 4Runner, Pickup, Celica 2.4L L4 SOHC Naturally Aspirated 22RE,22R,22REC.
  • FITMENT NOTES: w/o Oil Pump & Timing Belt Or Timing Kit.
  • You are assured to receive a worldwide proven Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock